Line, Circle, Arc, and Rectangle AutoCAD MCQs

By: Prof. Dr. Fazal Rehman | Last updated: September 24, 2024

1. What command is used to draw a straight line in AutoCAD? A) LINE B) STRAIGHT C) DRAW D) SEGMENT Answer: A) LINE 2. Which command is used to create a circle in AutoCAD? A) CIRCLE B) ROUND C) ARC D) ELLIPSE Answer: A) CIRCLE 3. What does the ARC command do in AutoCAD? A) Creates straight lines B) Creates circular arcs C) Draws polygons D) Creates ellipses Answer: B) Creates circular arcs 4. Which command allows you to draw a rectangle by specifying opposite corners? A) RECTANGLE B) SQUARE C) BOX D) SHAPE Answer: A) RECTANGLE 5. How can you create a circle using its center and radius? A) CIRCLE B) RADIUS C) CENTERCIRCLE D) ARC Answer: A) CIRCLE 6. What does the LENGTH command measure in AutoCAD? A) The total area of an object B) The distance between two points C) The perimeter of a shape D) The angle of an arc Answer: B) The distance between two points 7. Which command is used to create a rectangle by specifying the center point? A) CENTERRECT B) RECTANGLE C) POLYGON D) SQUARE Answer: A) CENTERRECT 8. What is the purpose of the FILLET command? A) To create sharp corners B) To round the corners of lines C) To measure angles D) To duplicate objects Answer: B) To round the corners of lines 9. Which option allows you to draw an ellipse in AutoCAD? A) ELLIPSE B) CIRCLE C) ARC D) POLYGON Answer: A) ELLIPSE 10. How can you create a circular arc using three points? A) ARC command B) 3P command C) CIRCLE command D) ELLIPSE command Answer: B) 3P command 11. What does the TRIM command do in relation to lines? A) Connects two lines B) Shortens lines to a specified edge C) Creates a line D) Deletes lines Answer: B) Shortens lines to a specified edge 12. How do you create a 3D circle in AutoCAD? A) By using the CIRCLE command B) By using the SPHERE command C) By using the POLYLINE command D) 3D circles are not supported Answer: A) By using the CIRCLE command 13. Which command can you use to mirror a line in AutoCAD? A) MIRROR B) FLIP C) REVERSE D) REFLECT Answer: A) MIRROR 14. How do you change the radius of a circle in AutoCAD? A) By using the RADIUS command B) By using the SCALE command C) By drawing a new circle D) By editing the existing circle properties Answer: D) By editing the existing circle properties 15. Which command is used to create tangent arcs? A) TANGENT B) ARC C) FILLET D) TRIM Answer: C) FILLET 16. What command do you use to create a polygon in AutoCAD? A) POLYGON B) SHAPE C) RECTANGLE D) CIRCLE Answer: A) POLYGON 17. How can you create a rectangular array of lines? A) ARRAY command B) MULTILINE command C) BLOCK command D) REPEAT command Answer: A) ARRAY command 18. Which command allows you to edit a circle’s radius after it’s drawn? A) CIRCLEEDIT B) PROPERTIES C) MODIFY D) CHANGE Answer: B) PROPERTIES 19. What does the OFFSET command do for a line? A) Creates a parallel line at a specified distance B) Moves the line to a new position C) Deletes the original line D) Changes the line’s angle Answer: A) Creates a parallel line at a specified distance 20. How can you create an arc with a specified start point, center, and angle? A) ARC B) 3P C) CENTER D) AOA (Angle Of Arc) Answer: D) AOA (Angle Of Arc) 21. Which command is used to create filleted corners on a rectangle? A) ROUNDCORNERS B) FILLET C) ROUND D) CORNER Answer: B) FILLET 22. How do you create a polyline that resembles a circle? A) By using the ELLIPSE command B) By creating a series of short lines C) By using the POLYLINE command D) By modifying a circle Answer: B) By creating a series of short lines 23. What command would you use to delete a section of a line that exceeds a boundary? A) TRIM B) CUT C) DELETE D) REMOVE Answer: A) TRIM 24. How do you draw a line using specific coordinates in AutoCAD? A) LINE command with coordinates B) DIRECT command C) POINT command D) COORD command Answer: A) LINE command with coordinates 25. What does the SPLINE command create? A) Straight lines B) A flexible curve through specified points C) A polygon D) A series of arcs Answer: B) A flexible curve through specified points 26. How do you create a 2D rectangle in AutoCAD? A) RECTANGLE command B) BOX command C) 2DRECTANGLE command D) SQUARE command Answer: A) RECTANGLE command 27. Which command allows you to break a line into two segments? A) BREAK B) SPLIT C) DIVIDE D) TRIM Answer: A) BREAK 28. How can you rotate a line in AutoCAD? A) ROTATE command B) TURN command C) SPIN command D) ANGLE command Answer: A) ROTATE command 29. What is the primary function of the RADIUS command? A) Draw a circle B) Measure the distance from the center to the edge of a circle C) Change the radius of an existing circle D) Create a fillet Answer: B) Measure the distance from the center to the edge of a circle 30. How can you quickly access the Circle command? A) By typing C and pressing Enter B) By clicking the circle icon C) By using the shortcut CIRCLE D) All of the above Answer: D) All of the above 31. Which command can create an ellipse by specifying its axes? A) ELLIPSE B) CIRCLE C) ARC D) POLYGON Answer: A) ELLIPSE 32. How do you ensure that a line is drawn at a specific angle? A) Using the ANGLE command B) By setting the angle in the LINE command C) By using the ROTATE command after drawing D) By snapping to angles Answer: B) By setting the angle in the LINE command 33. What is the use of the STRETCH command in relation to lines? A) To resize lines B) To move a part of an object C) To create parallel lines D) To fillet corners Answer: B) To move a part of an object 34. How can you create an enclosed area in AutoCAD? A) By using the HATCH command B) By connecting lines manually C) By using the OFFSET command D) By drawing a rectangle Answer: A) By using the HATCH command 35. What command is used to draw a polyline in AutoCAD? A) POLYLINE B) LINE C) PLINE D) POLYGON Answer: C) PLINE 36. Which option allows you to create arcs with a defined radius in AutoCAD? A) ARC B) RADIUS C) FILLET D) DIMENSION Answer: C) FILLET 37. How do you create a line with specific length? A) Use the LINE command and specify length B) Use the LENGTH command C) Use the MEASURE command D) It cannot be done directly Answer: A) Use the LINE command and specify length 38. What does the POLYGON command do in AutoCAD? A) Creates a circle B) Draws a closed shape with a specified number of sides C) Draws arcs D) Creates an ellipse Answer: B) Draws a closed shape with a specified number of sides 39. How can you edit the properties of a rectangle after it is created? A) Use the PROPERTIES palette B) Use the MODIFY command C) Double-click the rectangle D) All of the above Answer: D) All of the above 40. What is the function of the DIMLINEAR command in AutoCAD? A) To create a line B) To measure a straight distance C) To create a dimension line for angles D) To create arcs Answer: B) To measure a straight distance 41. How can you create a line with a specific length and angle? A) By using the LINE command and specifying the angle B) By using the LENGTH command C) By using the POLYLINE command D) It cannot be done directly Answer: A) By using the LINE command and specifying the angle 42. What is the purpose of the HATCH command? A) To fill a shape with a pattern B) To create outlines C) To draw lines D) To modify shapes Answer: A) To fill a shape with a pattern 43. How do you define the center point of a circle in AutoCAD? A) By specifying coordinates B) By clicking anywhere on the screen C) By using the CIRCLE command D) All of the above Answer: A) By specifying coordinates 44. What happens when you use the TRIM command on overlapping lines? A) It deletes the entire line B) It shortens lines to the nearest edge C) It creates a new line D) It combines the lines Answer: B) It shortens lines to the nearest edge 45. How can you create an ellipse by specifying its center and axis lengths? A) ELLIPSE command B) CIRCLE command C) POLYGON command D) RECTANGLE command Answer: A) ELLIPSE command 46. What command would you use to create a line at a specific angle? A) ANGLE B) ROTATE C) LINE D) PLINE Answer: C) LINE 47. Which command creates a rectangle by specifying a corner and dragging to the opposite corner? A) RECTANGLE B) BOX C) SQUARE D) AREA Answer: A) RECTANGLE 48. How can you create a concentric circle in AutoCAD? A) By using the CIRCLE command B) By specifying the center point of the original circle C) By duplicating the existing circle D) All of the above Answer: D) All of the above 49. Which command is used to align an arc with a line? A) ALIGN B) TRIM C) FILLET D) ROTATE Answer: C) FILLET 50. How do you draw an arc with a given center and radius? A) By using the ARC command B) By using the CIRCLE command C) By using the LINE command D) By using the OFFSET command Answer: A) By using the ARC command    
All Copyrights Reserved 2025 Reserved by T4Tutorials