Test cases for lift

Test cases for lift of plaza or a building.
Basic Functionality

Test Case ID	Description	Test Steps	Expected Result
TestCase#001	check that The building lift responds to a call from the ground floor.	1. Press the “Up” button on the ground floor.	The building lift should arrive at the ground floor.
TestCase#002	check that The building lift responds to a call from an upper floor.	1. Press the “Down” button on an upper floor.	The building lift should arrive at the designated upper floor.
TestCase#003	check that The building lift door opens when it arrives at a floor.	1. Enter The building lift. 2. Press the button for a desired floor.	The building lift door should open, and The building lift should start moving to the selected floor.
TestCase#004	check that The building lift door closes after a delay in response when no one enters.	1. Enter The building lift and don’t press any floor button.	The building lift door should close automatically after a predefined delay in response.
TestCase#005	check that The building lift stops when reaching the selected floor.	1. Enter The building lift. 2. Press the button for a desired floor.	The building lift should stop at the selected floor, and the door should open.

2. Emergency Scenarios

Test Case ID	Description	Test Steps	Expected Result
TestCase#006	To check the response to an emergency stop button.	1. Press the emergency stop button inside The building lift.	The building lift should stop immediately, and an alarm or notification should be activated.
TestCase#007	To check the response to a fire alarm or emergency evacuation.	1. Activate the fire alarm or emergency evacuation system.	The building lift should move to a predefined floor and open the doors, allowing occupants to exit.

3. Capacity and Weight Limit

Test Case ID	Description	Test Steps	Expected Result
TestCase#008	check that The building lift doesn’t allow entry beyond its capacity.	1. Fill The building lift with the maximum allowed number of people.	The building lift should not allow additional people to enter, and a warning should be displayed if attempted.
TestCase#009	check that The building lift doesn’t operate when exceeding weight limits.	1. Exceed the weight limit by placing heavy objects in The building lift.	The building lift should display a warning and not operate until the weight is reduced below the limit.

4. Accessibility Features

Test Case ID	Description	Test Steps	Expected Result
TestCase#010	check that The building lift has audible and visible indicators for floor numbers.	1. Observe the floor number indicators inside The building lift.	Audible announcements and visible floor numbers should be present and accurate.
TestCase#011	check that The building lift has Braille labels and tactile buttons for accessibility.	1. Inspect The building lift buttons for Braille labels and tactile feedback.	Buttons should have Braille labels, and users should feel tactile feedback when pressing buttons.

More Test Cases for Projects

Related Posts:

Contents Copyrights Reserved By T4Tutorials