Research Topics of Electrical  material and devices

Research area interest and ideas: Electrical  material and devices

  1. Field-effect at electrical contacts to two-dimensional materials
  2. Multimedia system model for electrical circuits on android mobile devices
  3. Exploiting the KPFM capabilities to analyze at the nanoscale the impact of electrical stresses on OTFTs properties
  4. Structural, electrical, and nonlinear optical performance of PVAL embedded with Li+‐ions for multifunctional devices
  5. … Sulfonate Composite Films with High Electrical and Thermal Conductivities for Energy Storage and Thermal Management in Nanoscale Electronic Devices
  6. A coupling method of the Superconducting Devices modeled by Finite Element Method with the Lumped Parameters electrical circuit
  7. Two step synthesis and electrochemical behavior of SnO2 nanomaterials for electrical energy storage devices
  8. P-Type Chemical Doping-Induced High Bipolar Electrical Conductivities in a Thermoelectric Donor–Acceptor Copolymer
  9. Advances in multiplex electrical and optical detection of biomarkers using microfluidic devices
  10. Electrical and Microstructural Characterization of TiO2 Thin Films for Flexoelectric Devices
  11. Structural, electrical and optical properties of Mn0. 2Co0. 8Fe2O4 nano ferrites
  12. A comparative study on electrical characteristics of Ni/n-Si and Ni/p-Si Schottky diodes with Pinus Sylvestris Resin interfacial layer in dark and under illumination at …
  13. Synthesis of Graphene oxide OG by recycling graphite from the rods of electrical storage devices: application to the retention of Hg2+ in aquatic environments
  14. Electroprinting of MWCNT-assisted PVDF thin films with enhanced electrical properties
  15. Modeling the Spatial Distribution of the Magnetic Field in Magnetic Systems of Electrical Devices Using Block Elements and Fundamental Solutions
  16. Nanofiber induced enhancement of electrical and electrochemical properties in polymer gel electrolytes for application in energy storage devices
  17. Design Guidelines of Printing Processes to Improve Electrical and Mechanical Properties for Haptics and Robotics
  18. Electrically Doped Nanoscale Devices Using First-Principle Approach: A Comprehensive Survey
  19. Deep Brain Stimulation via Electrical and Optical Devices
  20. Thermal, structural, optical and electrical conductivity studies of pure and Fe3+ ions doped PVP films for semoconducting polymer devices
  21. Structural, electrical and optical properties of Mn0. 2Co0. 8Fe2O4 nano ferrites
  22. A comparative study on electrical characteristics of Ni/n-Si and Ni/p-Si Schottky diodes with Pinus Sylvestris Resin interfacial layer in dark and under illumination at …
  23. Synthesis of Graphene oxide OG by recycling graphite from the rods of electrical storage devices: application to the retention of Hg2+ in aquatic environments
  24. Electroprinting of MWCNT-assisted PVDF thin films with enhanced electrical properties
  25. Modeling the Spatial Distribution of the Magnetic Field in Magnetic Systems of Electrical Devices Using Block Elements and Fundamental Solutions
  26. Nanofiber induced enhancement of electrical and electrochemical properties in polymer gel electrolytes for application in energy storage devices
  27. Design Guidelines of Printing Processes to Improve Electrical and Mechanical Properties for Haptics and Robotics
  28. Electrically Doped Nanoscale Devices Using First-Principle Approach: A Comprehensive Survey
  29. Deep Brain Stimulation via Electrical and Optical Devices
  30. Thermal, structural, optical and electrical conductivity studies of pure and Fe3+ ions doped PVP films for semoconducting polymer devices
  31. Electrical properties of a metal-germanium-topological insulator (metal/n-Ge/p-Bi 2 Te 3) heterostructure devices
  32. Dielectric and electrical properties of synthesized PBGO/Fe3O4 nanocomposite
  33. Contraction model of skeletal muscle driven by external electrical stimulation—Proposal and Identification—
  34. Optical, Electrical and Structural Properties of Copper Antimony Sulphide (CuSbS2) Films Deposited by Spray Pyrolysis technique for Photovoltaic Applications.
  35. Optical, Electrical, Structural and morphological Properties of Electrodeposited CdMnS Thin Film Semiconductors for Possible Device Applications
  36. Structural, Magnetic, and Electrical Properties of (1-x) Na 0.5 Bi 0.5 TiO 3–(x) NiFe 2 O 4 (x= 0.1, 0.3, 0.5, 0.7, and 0.9) Multiferroic Particulate Composite
  37. Modeling electrical conduction in resistive-switching memory through machine learning
  38. Effects of N‐Ion Implantation on the Electrical and Photoelectronic Properties of MoS2 Field Effect Transistors
  39. Electrochemiluminescent Transistors: A New Strategy toward Light‐Emitting Switching Devices
  40. Electrical and photoelectrical properties of Schottky diode construction with three-dimensional (3D) graphene aerogel interlayer
  41. A green bio-inspired chelating design for improving the electrical conductivity of flexible biopolymer-based composites
  42. Compact modelling of electrical, optical and thermal properties of multi-colour power LEDs operating on a common pcb
  43. Effect of Nitrogen Doping on the Optical Bandgap and Electrical Conductivity of Nitrogen-Doped Reduced Graphene Oxide
  44. Optical and Electrical Properties of Pyrene–Imine Organic Interface Layer Based on p-Si
  45. New solutions for controlled compensating devices
  46. Triboelectric nanogenerators for therapeutic electrical stimulation
  47. Enabling high-porosity porous silicon as an electronic material
  48. Gamma-ray induced modifications on CdS nanorod mesh: Structural, optical, and electrical properties
  49. Covalently interconnected transition metal dichalcogenide networks via defect engineering for high-performance electronic devices
  50. Simultaneous effect of fluorine impregnation on highly mesoporous activated carbon used in high-performance electrical double layer capacitors
  51. Application of Modelling Tools for the Electrical Characterisation of Organic Semiconduc
  52. Investigation of structural, optical, electrical and mechanical properties of transparent conducting ‘Ag’electrodes
  53. A review of WBG and Si devices hybrid applications
  54. Magnetic Properties of FFF/FDM 3D Printed Magnetic Material
  55. Structural, Electrical and Electrochemical Properties of Fe Doped Orthosilicate Cathode Materials
  56. Investigation of dielectric, electrical and optical properties of copper substituted Mn-Zn nanoferrites
  57. Two-dimensional van der Waals electrical contact to monolayer MoSi2N4
  58. Low‐Voltage Electrical Heater Based on One‐Step Fabrication of Conductive Cu Nanowire Networks for Application in Wearable Devices
  59. 3D/4D printed tunable electrical metamaterials with more sophisticated structures
  60. Investigation on the optical and electrical properties of undoped and Sb-doped SnO2 nanowires obtained by the VLS method
  61. Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors
  62. Applications of electron microscopy to the analysis of processed Si devices and materials
  63. The electrical and reliability characteristics of 6500V/25A SiC diode module
  64. Structural, morphological, and opto‐electrical properties of Y2‐xYbxO3 nanoparticles synthesized using co‐precipitation method
  65. The flexible film of SCF/BN/PDMS composites with high thermal conductivity and electrical insulation
  66. Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles
  67. Electrical insulating MXene/PDMS/BN composite with enhanced thermal conductivity for electromagnetic shielding application
  68. Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper
  69. Integration of supercapacitors and batteries towards high‐performance hybrid energy storage devices
  70. Morphological and Electrical Properties of β-Ga2O3/4H-SiC Heterojunction Diodes
  71. From diagnosis to treatment: recent advances in patient-friendly biosensors and implantable devices
  72. Electrical tuning of phase-change antennas and metasurfaces
  73. Growing perovskite quantum dots on carbon nanotubes for neuromorphic optoelectronic computing
  74. Contact resistance corrected-electrical characteristics with channel length effects in π-conjugated small-molecule benzanthracene organic thin film transistors
  75. Two-dimensional Conducting Metal-Organic Frameworks Enabled Energy Storage Devices
  76. Review on Electrical Safety Requirements from Electrical Accidents in Institutions
  77. ZnO and MXenes as electrode materials for supercapacitor devices
  78. Band gap engineering and enhancement of electrical conductivity in hydrothermally synthesized CeO2 ̶ PbS nanocomposites for solar cell applications
  79. State Verification Scheme for Measuring Instruments to Measure AC and DC Electrical Resistance
  80. Multipurpose setup used to characterize tribo-electrical properties of electrical contact materials
  81. Carbon nanotubes-coated conductive elastomer: electrical and near infrared light dual-stimulated shape memory, self-healing, and wearable sensing
  82. Enhancing light‐matter interaction in 2D materials by optical micro/nano architectures for high‐performance optoelectronic devices
  83. Bioinspired Photonic Ionogels as Interactively Visual Ionic Skin with Optical and Electrical Synergy
  84. Satisfiability Attack-Resistant Camouflaged Two-Dimensional Heterostructure Devices
  85. Effect of Gd doping on electrical transport properties of La0. 8Sr0. 2MnO3 polycrystalline ceramics
  86. Electrical performance of organic/inorganic hybrid solar cell devices based on n-type GaAs substrate orientations and a conjugated polymer (PANI)
  87. Stretchable energy storage devices based on carbon materials
  88. Hybrid Devices by Selective and Conformal Deposition of PtSe2 at Low Temperatures
  89. An investigation of the Temperature-and Frequency-dependent Conductivity behavior and Electrical properties of Ba0. 97La0. 02Ti0. 9Nb0. 08O3 compound using …
  90. Novel electrical properties and applications in kaleidoscopic graphene nanoribbons

 

  1. Study about FZ/MCZ Si Wafer (Mother) Material Carbon and Oxygen density for RC-IGBT with Electron Beam Irradiation Based on Electrical and Physical Analysis
  2. Fabrication of highly resistive La–Zn co-substituted spinel strontium nanoferrites for high frequency devices applications
  3. Review of titanium trisulfide (TiS3): A novel material for next generation electronic and optical devices
  4. Electrical characteristics of wire-to-wire dielectric barrier discharges
  5. Recent development and applications of electrical conductive MOFs
  6. Uniform Crystal Formation and Electrical Variability Reduction in Hafnium-Oxide-Based Ferroelectric Memory by Thermal Engineering
  7. Electrical Transport Properties of Sm-doped La0. 7Ca0. 3MnO3 Polycrystalline Ceramics
  8. Decoupling of the Electrical and Thermal Transports in Strongly Coupled Interlayer Materials
  9. Structural, optical, and electrical properties of copper oxide films grown by the silar method with post-annealing
  • Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices
  • A plasmonically enhanced route to faster and more energy-efficient phase-change integrated photonic memory and computing devices
  • Bio‐epoxy Polymer, Blends and Composites Derived Utilitarian Electrical, Magnetic and Optical Properties
  • Effects of bipolar repetitive square wave voltage parameters on electrical tree characteristics of epoxy resin
  • A Review on Polyaniline-Graphene Nanoplatelets (PANI/GNPs-DBSA) Based Nanocomposites Enhancing the Electrical Conductivity
  • Phase-resolved electrical detection of coherently coupled magnonic devices
  • Synergistic effect of Mn on bandgap fluctuations and surface electrical characteristics in Ag-based Cu 2 ZnSn (S, Se) 4 solar cells
  • Biomass-derived biochar materials as sustainable energy sources for electrochemical energy storage devices
  • Recent progress on improving the mechanical, thermal and electrical conductivity properties of polyimide matrix composites from nanofillers perspective for …
  • Dynamics of polarization vortices revealed in a ferroelectric material
  • Studies of structural, ferroelectric, magnetic and electrical characteristics of Bi (Fe 1− x Nd x) O 3 (x= 0.05, 0.10, 0.15) multiferroics

 

  • 0D to 3D carbon-based networks combined with pseudocapacitive electrode material for high energy density supercapacitor: A review
  • Investigating the underlying biomechanical mechanisms leading to falls in long-term ankle-foot orthosis and functional electrical stimulator users with chronic stroke
  • Highly efficient and air stable thermoelectric devices of poly (3-hexylthiophene) by dual doping of Au metal precursors
  • Effect of particle shape on electrical conductivity and negative permittivity spectra of Cu granular composite materials
  • The performance limits of hexagonal boron nitride as an insulator for scaled CMOS devices based on two-dimensional materials
  • High electrical conductivity and breakdown current density of individual monolayer Ti3C2Tx MXene flakes
  • Evolution of the stock of electrical and electronic equipment in the Peruvian residential sector
  • Electrical properties of perovskite solar cells by illumination intensity and temperature‐dependent photoluminescence imaging
  • Flexible MXene‐Based Composites for Wearable Devices
  • Synthesis, characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

 

  • Investigation of the optical, electrical, and elemental properties upon annealing of spatial atomic layer deposited (SALD) Al-doped ZnO thin films
  • Tuning the electrical properties of cellulose nanocrystals through laser-induced graphitization for UV photodetectors
  • EFFECT OF FIN WIDTH ON ELECTRICAL PARAMETER OF TRI-GATE JUNCTIONLESS FINFET
  • Superior lubrication and electrical stability of graphene as highly effective solid lubricant at sliding electrical contact interface
  • Thermal and Electrical behaviors of Boron Nitride/Epoxy reinforced polymer matrix composite—A review
  • Optical and electrical properties of biocompatible and novel (CS–GO) polymer nanocomposites
  • Four-Period Vertically Stacked SiGe/Si Channel FinFET Fabrication and Its Electrical Characteristics
  • 2D material based synaptic devices for neuromorphic computing
  • Humidity-dependent Electrical Conductance of Carbon/Polymer Composite Micro-Fibers
  • The electrical modulus, conductivity and dielectric properties of Mn3TeO6 multiferroic compound

 

  • Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
  • Investigation of structural, morphology, optical properties and electrical transport conduction of Li0. 25Na0. 75CdVO4 compound
  • Effect of Copper-Based Spring Alloy Selection on Arc Erosion of Electrical Contacts in a Miniature Electrical Switch
  • Electrically reconfigurable non-volatile metasurface using low-loss optical phase-change material
  • The effect of voltage bias on the yield and electrical properties of Exfoliated Graphene synthesized via electrochemical method
  • Metastable electrical resistivity of amorphous Ge2Sb2Te5 at elevated temperatures
  • Exploration of the temperature-dependent correlations present in the structural, morphological and electrical properties of thermally reduced free-standing …
  • Controlling the macroscopic electrical properties of reduced graphene oxide by nanoscale writing of electronic channels
  • High-performance lead-free bulk ceramics for electrical energy storage applications: design strategies and challenges
  • Electrical and Thermal Performance of Ga₂O₃–Al₂O₃–Diamond Super-Junction Schottky Barrier Diodes

 

  • The electrical transport properties of asymmetric C2 Nh 2 D nanoribbon.
  • Green thin film for stable electrical switching in a low-cost washable memory device: proof of concept
  • Facile fabrication of ultrathin graphene film with ultrahigh electrical conductivity and superb electromagnetic interference shielding effectiveness
  • Experimental thermal and electrical performance analysis of a concentrating photovoltaic/thermal system integrated with phase change material (PV/T-CPCM)
  • Three-phase electric power driven electroluminescent devices
  • Electrical Characterization of Conductive Threads for Textile Electronics
  • Optical and electrical modulation in ultraviolet photodetectors based on organic one‐dimensional photochromic arrays
  • MRI‐related heating of implants and devices: a review
  • Low-powered implantable devices activated by ultrasonic energy transfer for physiological monitoring in soft tissue via functionalized electrochemical electrodes
  • Electrical read-out of light-induced spin transition in thin film spin crossover/graphene heterostructures

 

  • Surface electrical properties modulation by multimode polarizations inside hybrid perovskite films investigated through contact electrification effect
  • Impact of Embedded Liquid Cooling on the Electrical Characteristics of GaN-on-Si Power Transistors
  • Enhancement in electrical and optical properties of field-effect passivated GaN blue light emitting diodes
  • Formation mechanisms and electrical properties of perovskite mesocrystals
  • Impact of neodymium doping on the dielectric and electrical properties of CCTO synthesized by a facile sol–gel technique
  • High thermal conductivity and electrical insulation of liquid alloy/ceramic/epoxy composites through the construction of mutually independent structures
  • Optimizing electrochemical performance of sonochemically and hydrothermally synthesized cobalt phosphate for supercapattery devices
  • Structural, dielectric, electrical and modulus spectroscopic characteristics of CoFeCuO4 spinel ferrite nanoparticles
  • Impact of the Si Content on the Electrical Properties of NiSixGe1–x Source/Drain Contact Metal for Ge pMOSFETs
  • Investigation of Dynamic Temperature-Sensitive Electrical Parameters for Medium-Voltage SiC and Si Devices

 

  • Impact of copper (Cu) and iron (Fe) co-doping on structural, optical, magnetic and electrical properties of tin oxide (SnO2) nanoparticles for optoelectronics …
  • A simple dynamic characterization method for thin stacked dielectric elastomer actuators by suspending a weight in air and electrical excitation
  • Structural and electrical investigation of ‘Bi’doped SmFeO3-BaTiO3 perovskite system
  • Screen printing fabricating patterned and customized full paper-based energy storage devices with excellent photothermal, self-healing, high energy density and good …
  • Electrical Characterization of Memristors for Neuromorphic Computing
  • Structural and electrical characterisation of PtS from H2S-converted Pt
  • Structural and electrical properties of Ba-substituted spinel ferrites
  • Multi‐Fidelity High‐Throughput Optimization of Electrical Conductivity in P3HT‐CNT Composites
  • Spin-state-dependent electrical conductivity in single-walled carbon nanotubes encapsulating spin-crossover molecules
  • Influence of Sm doping on structural, ferroelectric, electrical, optical and magnetic properties of BaTiO3

 

  • Effects of Gadolinium dopant on electrical characterization of p-type Silicon diodes
  • Comparative Study of the Properties of Cu-Cr-Mo System Electrical Contact Material by Sintering and Infiltration Methods
  • Influence of Cu irons on structural, optical, and electrical properties of pure WS2 thin films and development of p-Si/n-Cu@ WS2 photodiode for optoelectronic …
  • Electrical impedance spectroscopy study of unsubstituted palladium (II) phthalocyanine
  • Effect of short-term increase in occlusal vertical dimension on masticatory muscle electrical activities and pressure-to-pain threshold: A crossover clinical study
  • Switching the electrical characteristics of TiO2 from n-type to p-type by ion implantation
  • Influence of threshold voltage performance analysis on dual halo gate stacked triple material dual gate TFET for ultra low power applications
  • Superior performance of cobalt oxide/carbon composite for solid-state supercapattery devices
  • A Novel Teeth Junction Less Gate All Around FET for Improving Electrical Characteristics
  • A sectorial scheme of gate-all-around field effect transistor with improved electrical characteristics

 

  • Optimization of Electrical Performance of Defected n+-p-p+ Solar Cell with CdS/BaSi2/Cu2O Heterostructure Using SCAPs 1D
  • Evaluating the Electrical Characteristics of Quasi-One-Dimensional ZrTe3 Nanoribbon Interconnects
  • 2D HfN2/graphene interface based Schottky device: Unmatched controllability in electrical contacts and carrier concentration via electrostatic gating and out-of-plane …
  • Printing Multi‐Material Organic Haptic Actuators
  • Nickel and cobalt sulfide-based nanostructured materials for electrochemical energy storage devices
  • Millimeter-Wave Reflector Based on a Ferroelectric Material with Electrical Beam Steering
  • Electrical and Mechanical Characterization of Carbon-Based Elastomeric Composites for Printed Sensors and Electronics
  • Poly (3, 4-ethylenedioxythiophene)(PEDOT) as promising thermoelectric materials and devices
  • 3D-PLA-experimental set up to display the electrical background of the so-called geometric factor of electrokinetic cells
  • Impact of SRFE process on electrical properties of PN photodetector

 

  • Self-powered cardiovascular electronic devices and systems
  • Optimization of cobalt-manganese binary sulfide for high performance supercapattery devices
  • Progress and Perspective: MXene and MXene‐Based Nanomaterials for High‐Performance Energy Storage Devices
  • 3D structured graphene fluoride-based epoxy composites with high thermal conductivity and electrical insulation
  • Effect of electric load characteristics on the arc erosion behavior of Ag-8wt.% Ni electrical contact material prepared by spark plasma sintering
  • Implementation of Digital Twins for electrical energy conversion systems in selected case studies
  • On the Possibility of Generating a Shock Current Pulse for Testing Power Semiconductor Devices Using an AC Power Grid
  • Improvement of the uniformity and electrical properties of polyaniline nanocomposite film by addition of auxiliary gases during atmospheric pressure plasma …
  • Carbon aerogel reinforced PDMS nanocomposites with controllable and hierarchical microstructures for multifunctional wearable devices
  • Polarity in ZnO nanowires: a critical issue for piezotronic and piezoelectric devices

 

  • The effect of the dopant’s reactivity for high-performance 2D MoS 2 thin-film transistor
  • Structural, electrical properties and photoluminescence analyses of the terbium doped barium titanate
  • Effects of sintering temperature on the microstructure, electrical and magnetic characteristics of copper-zinc spinel ferrite with possibility use as humidity sensors
  • Heat dissipation in graphene foams
  • A review on the applicability of life cycle assessment to evaluate the technical and environmental properties of waste electrical and electronic equipment
  • Temperature dependence of electrical parameters of the Cu/n-Si metal semiconductor Schottky structures
  • Simultaneous measurement of electrical characteristics and microstructure of crystallised PEDOT: PSS based OECTs under strain
  • Suppression of ambipolar behavior and simultaneous improvement in RF performance of gate-overlap tunnel field effect transistor (GOTFET) devices
  • Advances in Photonic Devices Based on Optical Phase-Change Materials
  • Structural, morphological and electrical analysis of dual doped Sr-hexaferrite nanoparticles

 

  • Deciphering the Role of Defects in the Ambipolar Electrical Transport in Nanocrystalline Sb2Se3 Thin Films
  • Exceptionally linear and highly sensitive photo-induced unipolar inverter device
  • Electrical and Optical Characteristics of SSI-LED Made from Capacitor Containing Tri-Layer WOx Embedded Zr-Doped HfOx Gate Dielectric
  • Size-Dependent Electrical Transport Properties in Conducting Diamond Nanostripes
  • Influence of divalent metal ion (Zn2+) on Magnetic properties, Curie temperature and DC Electrical properties in Ce3+ Substituted Ni-Zn Ferrites.
  • Effects of different electrical arrangements and Thomson effect on the system performance as well as the optimum allocation of thermocouples in a self-driven two …
  • The influence of electrical stress on the distribution of electrically active defects in IGBT
  • Effect of silica matrix on structural, optical and electrical properties of Li0. 5Fe2. 5O4 nanoparticles
  • Reduced Graphene Oxide Inserted into PEDOT: PSS Layer to Enhance the Electrical Behaviour of Light-Emitting Diodes
  • Omnidirectional Control of Large Electrical Output in a Topological Antiferromagnet

 

  • Electrical conductivity of germanium selenide nanosheets in oxygen and butane
  • Iron loss modeling of grain oriented electrical steels in FEM simulation environment
  • Influence of trap densities in ITO thin film on the optical, electrical, and surface plasmon resonance properties
  • The surface and electrical properties of the Al/Ba2P2O7/p-Si heterojunctions in wide range of temperature and frequency
  • Electrical and thermal transport behaviours of high-entropy perovskite thermoelectric oxides
  • Efficient Electrical Doping of Organic Semiconductors Via an Orthogonal Liquid‐Liquid Contact
  • Surface-engineered triboelectric nanogenerator patches with drug loading and electrical stimulation capabilities: Toward promoting infected wounds healing
  • Stretchable energy storage devices: from materials and structural design to device assembly
  • Investigations on structural, electrical, and third order nonlinear optical properties of benzimidazolium maleate single crystal
  • Aerosol filtration efficiency of household materials for homemade face masks: Influence of material properties, particle size, particle electrical charge, face velocity, and …

Add a Comment