interfacial phenomena Research Topics Ideas

By Prof. Fazal Rehman Shamil
Last modified on March 3rd, 2022

List of Research Paper ideas of interfacial phenomena in Math for MS and PhD thesis

1. The impact of multiple-component PFAS solutions on fluid-fluid interfacial adsorption and transport of PFOS in unsaturated porous media
2. Investigation of the Effect of 3D Meniscus Geometry on Fluid Dynamics and Crystallization via In Situ Optical Microscopy‐Assisted Mathematical Modeling
3. Physical and Mathematical Modelling of Fluid and Heat Transport Phenomena in Porous Media
4. Acceptance of personalized e-learning systems: a case study of concept-effect relationship approach on science, technology, and mathematics courses
5. Using mathematical modelling to identify data requirements for increased prediction accuracy in radiotherapy
6. A mathematical model for CO2 conversion of CH4-producing biocathodes in microbial electrosynthesis systems
7. Critical Review of Emulsion Stability and Characterization Techniques in Oil Processing
8. Rapid eutectic growth: from rod growth to diffusionless solidification
9. Stress analysis of elastic bi-materials by using the localized method of fundamental solutions
10. Variability of complex oscillatory regimes in the stochastic model of cold-flame combustion of a hydrocarbon mixture

11. Reflection and transmission of waves at the common interface of piezoelectric half-spaces with microstructure
12. A screening model for quantifying PFAS leaching in the vadose zone and mass discharge to groundwater
13. A mathematical modelling of multiphysics-based propagation characteristics of surface wave in piezoelectric-hydrogel layer on an elastic substrate
14. DATA: Diafiltration Apparatus for high-Throughput Analysis
15. Mathematical modeling for bubbling fluidized bed CO-methanation reactor incorporating the effect of circulation and particle flows
16. Effective interface conditions for continuum mechanical models describing the invasion of multiple cell populations through thin membranes
17. Challenges of numerical simulation of dynamic wetting phenomena: a review
18. Mathematical model of two-phase Taylor flow hydrodynamics for four combinations of non-Newtonian and Newtonian fluids in microchannels
19. Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions
20. Coloured-noise-induced transport in a model of the thermochemical reactor

21. A review on mathematical modelling of Direct Internal Reforming-Solid Oxide Fuel Cells
22. Structure diagram and dynamics of formation of hexagonal boron nitride in phase-field crystal model
23. Effect of fluorocarbon surfactants on the adsorption of hydrocarbon surfactants mixture at the water-air interface
24. Optimal convergence analysis of the energy-preserving immersed weak Galerkin method for second-order hyperbolic interface problems in inhomogeneous media

25. Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

26. Instability of a planar fluid interface under a tangential electric field in a stagnation point flow
27. Boiling crisis due to bubble interactions
28. Hydrothermal variations of radiative nanofluid flow by the influence of nanoparticles diameter and nanolayer
29. Mathematical modeling of physical processes in metals and ordered alloys
30. Optimization of battery charging strategy based on nonlinear model predictive control
31. Predicting concurrent structural mechanical mechanisms during microstructure evolution
32. Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence
33. Characteristics of thermophoresis and Brownian motion on radiative reactive micropolar fluid flow towards continuously moving flat plate: HAM solution
34. A theoretical and numerical analysis of a Dirichlet-Neumann domain decomposition method for diffusion problems in heterogeneous media
35. Continuum and Molecular Dynamics Studies of the Hydrodynamics of Colloids Straddling a Fluid Interface

36. Modelling of defects in aluminium cast products
37. Modelling of hemodynamics in bifurcation lesions of coronary arteries before and after myocardial revascularization
38. Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys
39. Role of zirconia phase transformation, interface processes, and Ta2O5 doping on the blistering phenomenon of molten glass in contact with zirconia-based …
40. Simulation of electric field control effects on the ion transport in proton exchange membranes for application in fuel cells and electrolysers
41. Calcium Signaling in the Photodamaged Skin: In Vivo Experiments and Mathematical Modeling
42. On ultrasound propagation in composite laminates: advances in numerical simulation
43. ALPACA-a level-set based sharp-interface multiresolution solver for conservation laws
44. Investigation of a sintering phenomenon through master sintering curve based on python software
45. Improving single-lap joint load bearing by bioinspired interlocking patterns on substrates

46. A phase field model for hydrogen-assisted fatigue
47. Depth-averaged coupling of submerged granular deformation with fluid flow: An augmented HLL scheme
48. Investigating the Unsteady Shock Bubble Multiphase Interactions
49. Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains
50. Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification
51. DEM-BEM coupling in time domain for one-dimensional wave propagation
52. Atomic-scale growth, imaging, spectroscopy, and electronic transport properties of metal-oxide films and interfaces
53. Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach
54. Thermal flow characteristics and the evolution of laser absorption in laser powder bed fusion of Cu-Cr-Zr alloy
55. Analysis of Damage and Failure mechanism under a lubricated slipper/swashplate interface in Axial Piston Machines

56. Thermoelectric Generators: A comprehensive review of characteristics and applications
57. Experimental study of the shear strength of a snow-mortar interface
58. Assisting/opposing/forced convection flow on entropy‐optimized MHD nanofluids with variable viscosity: Interfacial layer and shape effects
59. Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting
60. Modelling the adsorption of proteins to nanoparticles at the solid-liquid interface
61. Beam wobbling effects on laser transmission welding of dissimilar polymers: Experiments, modeling, and process optimization
62. Induced side-branching in smooth and faceted dendrites: theory and phase-field simulations
63. Simulation of Performance and Emissions Related Parameters in a Thermal Engine Using a Deep Learning Approach
64. Human cumulative culture and the exploitation of natural phenomena
65. Amorphization and nanocrystal formation in a Pd–Ni–Cu–P alloy after cooling under different conditions

66. Fuzzy Dynamical System in Alcohol-Related Health Risk Behaviors and Beliefs
67. Modelling of liquid film migration in Al-Cu alloys
68. A dynamic model of CO2 diffusion coefficient in shale based on the whole process fitting
69. Modeling polymer-metal frictional interface using multi-asperity contact theory
70. Does Machine Learning Offer Added Value vis-à-vis Traditional Statistics? An Exploratory Study on Retirement Decisions Using Data from the Survey of Health …
71. Simulation of Fracture Formation in Solid Oxide Fuel Cell Anode Using Peridynamic Modeling Method
72. Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation
73. Leveraging Prediction and Reflection in a Computational Setting to Enrich Undergraduate Students’ Combinatorial Thinking
74. Secondary and Tertiary Oil Recovery Processes
75. Investigation of the blast pressure following laser ablation at a solid–fluid interface using shock waves dynamics in air and in water

76. Investigation of the low-frequency stray current induced corrosion on reinforced concrete infrastructure in high-speed rail transit power supply system
77. Modeling nonlinear bending of axisymmetric circular nano-plates in framework of Ru’s surface stress elasticity theory
78. Modeling of the sedimentation process of monodisperse suspension
79. On Seawater Conductivity Control by Acoustic Radiation
80. Robust state-feedback stabilization of an underactuated network of interconnected n+ m hyperbolic PDE systems
81. Role of liquid and solid particles in solid-liquid mixed fluxes on sulfur removal from molten iron under centrifugal stirring by an impeller
82. Thin-film Rayleigh–Taylor instability in the presence of a deep periodic corrugated wall
83. Optothermal grid activation of microflow with magnetic nanoparticle thermophoresis for microfluidics
84. Modeling and simulation for estimating thin film lubrication effects on flow of Jeffrey liquid by a spiraling disk
85. Digitally-transformed early-warning protocol for membrane cleaning based on a fouling-cumulative sum chart: Application to a full-scale MBR plant

86. Analysis of fabrication and crack-induced porosity migration in mixed oxide fuels for sodium fast reactors by the finite element method
87. Modeling of micro-channel critical flow with inlet sub-cooling: Metastable liquid and nucleation
88. Structure–properties‐performance relationships in complex epoxy nanocomposites: A complete picture applying chemorheological and thermo‐mechanical kinetic …
89. Thermo-mechanical coupling shock waves propagation with phase transition under impact loading
90. Boundary integral formulations for acoustic modelling of high-contrast media
91. Design and Simulation of MEMS Based Capacitive Accelerometer
92. A non-standard numerical method for finite element modelling of tensile cracks in quasi-brittle material
93. The applicability of shungite as an electrically conductive additive in cement composites
94. A federated learning method for network intrusion detection
95. A hybrid partitioned deep learning methodology for moving interface and fluid–structure interaction

96. On the crystal growth kinetics of ultra‐toughened biobased polyamide 410: New insights on dynamic crystallization
97. Riemann solvers of a conserved high-order traffic flow model with discontinuous fluxes
98. Toward a Mechanistic Account of Extended Cognition
99. On the Development of Icephobic Surfaces: Bridging Experiments and Simulations
100. Competing spreading dynamics in simplicial complex
101. Local thermal non-equilibrium (LTNE) effects on thermal-free convection in a nanofluid-saturated horizontal elliptical non-Darcian porous annulus
102. Feature-based modeling for industrial processes in the context of digital twins: A case study of HVOF process
103. Further enhancement of the particle shifting technique: Towards better volume conservation and particle distribution in SPH simulations of violent free-surface flows
104. Epoxy-based/BaTiO3 nanodielectrics: Relaxation dynamics, charge transport and energy storage
105. Numerical assessment of thermal characteristics of metal foams of orderly varied pore density and porosity under different convection regimes

106. Modeling the recent outbreak of COVID-19 in India and its control strategies
107. Computation of unsteady generalized Couette flow and heat transfer in immiscible dusty and non‐dusty fluids with viscous heating and wall suction effects using a …
108. Analysis of adverse influence of metal vapor to arc movement between electrodes with external magnetic field applied by numerical simulation
109. Towards quantum simulations in particle physics and beyond on noisy intermediate-scale quantum devices
110. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites
111. A critical review on the electrosorption of organic compounds in aqueous effluent–Influencing factors and engineering considerations
112. Dip coating of cylinders with Newtonian fluids
113. Sub-Sampled Imaging for STEM: Maximising Image Speed, Resolution and Precision Through Reconstruction Parameter Refinement
114. Pore-scale study of the multiphase methane hydrate dissociation dynamics and mechanisms in the sediment
115. On geometrical properties of electromagnetic transmission eigenfunctions and artificial mirage

116. Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction
117. Impact of Respiratory Fluctuation on Hemodynamics in Human Cardiovascular System: A 0-1D Multiscale Model
118. Density-based turbulence damping at large-scale interface for Reynolds-averaged two-fluid models
119. Intelligent Design Optimization System for Additively Manufactured Flow Channels Based on Fluid–Structure Interaction
120. Induced magnetic field and viscous dissipation on flows of two immiscible fluids in a rectangular channel
121. A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer
122. Analysis of entropy generation in AA7072-methanol and AA7072+ AA7075-methanol flow near a parabolic surface
123. Multiscale topology optimization for graded cellular structures based on level set surface cutting
124. Marangoni convection flow of γ–Al2O3 nanofluids past a porous stretching surface with thermal radiation effect in the presence of an inclined magnetic field
125. Alkaline flooding

126. Nonmonotonic Pair Potentials in the Interaction of Like-Charged Objects in Solution
127. A Seamless, Extended DG Approach for Advection–Diffusion Problems on Unbounded Domains
128. 多模态瑞利-泰勒不稳定性的离散玻尔兹曼数值研究
129. Study of Parameters Influencing on the Performance of SiNW ISFET Sensor
130. Numerical analysis and safety design of grounding systems in underground compact substations
131. Pathway modeling and simulation analysis
132. A study of the generalized nonlinear advection-diffusion equation arising in engineering sciences
133. Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel
134. Sources of funding CSF
135. Dynamic magnetic birefringence in a viscoelastic ferrocolloid

136. Accelerated weathering effects on mechanical, thermal and viscoelastic properties of kenaf/pineapple biocomposite laminates for load bearing structural applications
137. Indexical AI
138. A numerical integration strategy of meshless numerical manifold method based on physical cover and applications to linear elastic fractures
139. Steepened wave in two-phase Chaplygin flows comprising a source term
140. A two-phase three-field modeling framework for heat pipe application in nuclear reactors
141. Effect of surfactant addition and viscosity of the continuous phase on flow fields and kinetics of drop formation in a flow-focusing microfluidic device
142. Update on emerging technologies including novel applications: radio frequency
143. Fundamental fluid dynamics challenges in inkjet printing
144. A stochastic model for nanoparticle deposits growth
145. Finite state graphon games with applications to epidemics

146. An analytical solution on spontaneous imbibition coupled with fractal roughness, slippage and gravity effects in low permeability reservoir
147. Diffusion, aggregation and electrokinetics
148. Influence of asphaltenes and resins on water/model oil interfacial tension and emulsion behavior: Comparison of extracted fractions from crude oils with different …
149. Volume of fluid-based numerical analysis of a pump-driven phase change heat transport device
150. Resolvent Estimates for a Compressible Fluid Model of Korteweg Type and Their Application
151. A comprehensive study of droplet formation in a capillary embedded step T-junction: From squeezing to jetting
152. Generalized thermal investigation of unsteady MHD flow of Oldroyd-B fluid with slip effects and Newtonian heating; a Caputo-Fabrizio fractional model
153. Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures
154. Effect of ionic liquids on thermomechanical properties of polyetheretherketone‐multiwalled carbon nanotubes nanocomposites
155. A melamine‐based covalent organic framework nanomaterial as a nanofiller in polyethersulfone mixed matrix membranes to improve separation and antifouling …

156. Data-Driven optimization of blast furnace iron making process using evolutionary deep learning
157. Provably non-stiff implementation of weak coupling conditions for hyperbolic problems
158. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites
159. An alternating-direction hybrid implicit-explicit finite-difference time-domain method for the Schrödinger equation
160. Co-encapsulation of curcumin and β-carotene in Pickering emulsions stabilized by complex nanoparticles: Effects of microfluidization and thermal treatment
161. Modified nanocrystalline cellulose partially replaced carbon black to reinforce natural rubber composites
162. Modeling of cooling and heat conduction in permanent mold casting process
163. Smooth finite element construction and correction method based on hybrid FE-SEA model
164. Implications of capillarity-wettability interaction on geometrically mediated droplet splitting mechanism
165. Wave power extraction for an oscillating water column device consisting of a surging front and back lip-wall: An analytical study

166. Impacts of wave-induced ocean surface turbulent kinetic energy flux on typhoon characteristics
167. An iterative analytical model for aging analysis of Li-ion cells
168. Effect of interfacial damping on high-frequency surface wave resonance on a nanostrip-bonded substrate
169. Experimental characterisation of sloshing tank dissipative behaviour in vertical harmonic excitation
170. Modelling of environmental ageing of polymers and polymer composites—modular and multiscale methods
171. On the selective laser melting based additive manufacturing of AlSi10Mg: The process parameter investigation through multiphysics simulation and experimental …
172. Isogeometric multilevel quadrature for forward and inverse random acoustic scattering
173. Using incomplete complex modes for model updating of monopiled offshore wind turbines
174. How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes?
175. Open capillary siphons

176. Modeling and simulation of a multi-bed industrial reactor for renewable diesel hydroprocessing
177. Reflectance Spectra Analysis Algorithms for the Characterization of Deposits and Condensed Traces on Surfaces
178. Numerical simulation of fuel dribbling and nozzle wall wetting
179. Dynamical analysis of two-pathogen coinfection in influenza and other respiratory diseases
180. Collaborative Decision-Making Centres for Sustainable Energy
181. Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology
182. A collaborative design platform for new alloy material development
183. Surface engineering and on-site charge neutralization for the regulation of contact electrification
184. Synthesis of PVDF‐B4C mixed matrix membrane for ultrafiltration of protein and photocatalytic dye removal
185. Nonconforming time discretization based on Robin transmission conditions for the Stokes–Darcy system

186. Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology
187. Atomistic elucidation of mechanical properties and fracture phenomenon of defective indium selenide monolayer
188. Insights into fracture mechanisms and strength behaviors of two-dimensional carbon fiber reinforced silicon carbide composites at elevated temperatures
189. Longitudinal remagnetization of uniaxial antiferromagnetic nanoparticles: the role of spontaneous magnetic moment
190. Progress and challenges on the thermal management of electrochemical energy conversion and storage technologies: Fuel cells, electrolysers, and …
191. Solution landscape of the Onsager model identifies non-axisymmetric critical points
192. Quantification of gas exsolution and preferential diffusion for alkane solvent (s)–CO2–heavy oil systems under nonequilibrium conditions
193. Fire whirls: a combustion science perspective
194. Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges
195. Effects of Textured Surfaces on Skin Friction

196. Dynamics of evaporating respiratory droplets in the vicinity of vortex dipoles
197. Direct observations of ultrasonically generated hot spots in polymer composite energetic materials
198. Surfactants and nanoscience
199. Friction-induced vibration of a slider-on-rotating-disc system considering uniform and non-uniform friction characteristics with bi-stability
200. Unsteady mixed convection flow of magneto-Williamson nanofluid due to stretched cylinder with significant non-uniform heat source/sink features
201. Interface sintering engineered superhydrophobic and durable nanofiber composite for high-performance electromagnetic interference shielding
202. Carbon dioxide diffusions in methane-dissolved pore fluids: implications for geological carbon storage and utilization in tight formations
203. Fractal dimension of India using multicore parallel processing
204. Stability-based optimization of ACRT for the growth of CZT by the traveling heater method
205. Smart healthcare security device on medical IoT using raspberry pi

206. Tribology—A Tool for Mechanical and Industrial Engineering
207. A Second Order Energy Dissipative Scheme for Time Fractional L 2 Gradient Flows using SAV Approach
208. Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency
209. Effects of low frequency multi-mode ultrasound and it’s washing solution’s interface properties on freshly cut cauliflower
210. An approach to simulate gas-solid flow systems with process controllers
211. Nonreciprocal and non-Hermitian material response inspired by semiconductor transistors
212. Theory and applications of new fractional-order chaotic system under Caputo operator
213. Numerical analysis on stability of functionally graded graphene platelets (GPLs) reinforced dielectric composite plate
214. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components
215. Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy

216. Unsteady aerodynamic forces on a tapered prism during the combined vibration of VIV and galloping
217. Bounds on quantum information storage and retrieval
218. Assembly techniques for proton exchange membrane fuel cell stack: A literature review
219. Moving parallel and transversal lines with touches on smartphones: a look through screenrecording
220. Behavioural response to heterogeneous severity of COVID-19 explains temporal variation of cases among different age groups
221. Non-extensive thermodynamic entropy to predict the dynamics behavior of COVID-19
222. Existence and Exponential Behavior for the Stochastic 2D Cahn–Hilliard–Oldroyd Model of Order One
223. Usefulness of PCM in building applications focusing on envelope heat exchange–Energy saving considering two scenarios
224. The Personalization of Learners’ Educational Paths E-learning
225. Exploiting low-grade waste heat to produce electricity through supercapacitor containing carbon electrodes and ionic liquid electrolytes

226. Deflection Modelling of MEMS Cantilever Beam Through Collocation Method Taking B-Splinesas Approximating Functions
227. Rheological approach to the adhesion property of metal‐plated acrylonitrile‐butadiene‐styrene to secure the driver’s safety
228. Thermodynamics of (nano) interfaces
229. Eigenfunction-based solution for one-dimensional solid-liquid phase change heat transfer problems with advection
230. Dynamics of deformable contacting bodies with sliding, rolling, and spinning
231. Self-consistent magneto-hydrodynamic modeling of ICP discharges
232. From point particles to body points
233. Estimating thermal properties of phase change material from heat flux measurements
234. A simple model for how the risk of pandemics from different virus families depends on viral and human traits
235. Repercussions of homogeneous and heterogeneous reactions of 3D flow of Cu-water and AL2O3-water nanofluid and entropy generation estimation along …

236. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys
237. Long-time dynamics of the Cahn–Hilliard equation with kinetic rate dependent dynamic boundary conditions
238. Investigation of MHD Casson fluid flow past a vertical porous plate under the influence of thermal diffusion and chemical reaction
239. Unsteady MHD oscillatory Casson fluid flow past an inclined vertical porous plate in the presence of chemical reaction with heat absorption and Soret effects
240. Influence of finite size of ions on thermal transport of a simultaneous electrokinetic-pressure driven flow of power-law fluids in a slit microchannel
241. Effect of interface deformation on hydrodynamics of liquid–liquid two-phase flow in a confined microchannel
242. Electrokinetic energy conversion of fluids with pressure-dependent viscosity in nanofluidic channels
243. A mixture theory analysis for reflection phenomenon of homogeneous plane-P1-wave at the boundary of unsaturated porothermoelastic media
244. Multiple Thixotropisms of Liquid Limit–Consistency Clays Unraveled by Multiscale Experimentation
245. Synergetic optimization of charge transport and breakdown strength of epoxy nanocomposites: Realizing sandwich topological structure through constructing a SiC …

246. Glare: A free and open-source software for generation and assessment of digital speckle pattern
247. Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT
248. Hybrid scanning electrochemical cell microscopy-interference reflection microscopy (SECCM-IRM): tracking phase formation on surfaces in small volumes
249. Effect of crump rubber on the solid particle erosion response of epoxy composites
250. Topology optimization for stability problems of submerged structures using the TOBS method
251. Effects of wall temperature and temperature-dependent viscosity on maximum spreading of water-in-oil emulsion droplet
252. Hydrocarbon emission control of a hydrocarbon adsorber and converter under cold start of the gasoline engine
253. REST-for-Physics, a ROOT-based framework for event oriented data analysis and combined Monte Carlo response
254. A perturbation method for evaluating the magnetic field induced from an arbitrary, asymmetric ocean world analytically
255. A comparative study of different types of sandwiched structures of SPR biosensor for sensitive detection of ssDNA

256. Educational psychology is evolving to accommodate technology, multiple disciplines, and Twenty-First-Century skills
257. Influence of mineralogy and surfactant concentration on zeta potential in intact sandstone at high pressure
258. A temperature-dependent atomistic-informed phase-field model to study dendritic growth
259. Scalar auxiliary variable approach for conservative/dissipative partial differential equations with unbounded energy functionals
260. Enhancing performance for three-phase induction motor by changing the magnetic flux density and core material using COMSOL
261. A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters
262. Experimental investigation and multiparameter analysis of variable conductance heat pipes
263. The Phenomenon of Electroporation
264. The existence of periodic solutions to doubly degenerate Allen-Cahn equation with Neumann boundary condition
265. Ferroelectric-HfO2/oxide interfaces, oxygen distribution effects, and implications for device performance

266. Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel
267. Three-dimensional physical simulation of water huff-n-puff in a tight oil reservoir with stimulated reservoir volume
268. Adaptive fuzzy global coupled nonsingular fast terminal sliding mode control of n-rigid-link elastic-joint robot manipulators in presence of uncertainties
269. Threshold Dynamics of an HIV-TB Co-infection Model with Multiple Time Delays
270. Harmful behaviour through plasmid transfer: a successful evolutionary strategy of bacteria harbouring conjugative plasmids
271. Study of Rivulet Flow Through Small Channels
272. Inlet Diffusor Buoyancy–Its Historical Use in Supersonic Transport Design
273. Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites
274. Nonlinear behaviors of the disc brake system under the effect of wheel− rail adhesion
275. Low Gravity Natural Convection and Pool Boiling Predictions

276. Polymer surface characterization
277. OpenMP application experiences: Porting to accelerated nodes
278. Anticipating critical transitions in psychological systems using early warning signals: Theoretical and practical considerations.
279. Why did cybernetics disappear from Latin America?
280. Anti-cavitation optimal design and experimental research on tidal turbines based on improved inverse BEM
281. Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer
282. Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by …
283. Epitaxial growth by atomic layer deposition and properties of high-k barium strontium titanate on Zintl-templated Ge (001) substrates
284. Experimental investigation and analytical modeling for blade-casing rubbing force
285. A Virtual Element Method for the wave equation on curved edges in two dimensions

286. CFD MODELING OF MICROCHANNELS COOLING FOR ELECTRONIC MICRODEVICES
287. Property enhancement in flexible poly (vinylidene fluoride)‐based piezoelectric films with large‐area preparation
288. A novel material based on deep eutectic solvents and its application in in‐situ modified silica‐reinforced styrene‐butadiene rubber
289. Internal flow phenomena of a Pump–Turbine model in turbine mode with different Thoma numbers
290. Preparation and properties enhancement of poly (lactic acid)/calcined‐seashell biocomposites for 3D printing applications
291. A Mechanics-Informed Artificial Neural Network Approach in Data-Driven Constitutive Modeling
292. Thermodynamic equilibrium and kinetic study of lanthanum chloride heptahydrate dehydration for thermal energy storage
293. Review of foam stability in porous media: The effect of coarsening
294. Household slow sand filters operating in continuous and intermittent flows: Computational fluid dynamics simulation and validation by tracer experiments
295. A numerical approach to investigate the impact of acid-asphaltene sludge formation on wormholing during carbonate acidizing

296. xc

297. Interface-Type Resistive Switching in Perovskite Materials
298. Hairpin RNA genetic algorithm based ANFIS for modeling overhead cranes
299. A quantitative assessment of the model form error of friction models across different interface representations for jointed structures
300. Limiting amplitude principle and resonances in plasmonic structures with corners: numerical investigation
301. Mesoscale perspective on the Tolman length
302. Hierarchical flaky porous carbon derived from waste polyimide film for high‐performance aqueous supercapacitor electrodes
303. A mortar formulation for frictionless line-to-line beam contact
304. A novel methodology to estimate the state-of-health and remaining-useful-life of a Li-ion battery using discrete Fourier transformation
305. Variability Estimation in Resistive Switching Devices, a Numerical and Kinetic Monte Carlo Perspective
306. eQuilibrator 3.0: a database solution for thermodynamic constant estimation

307. Metric Analysis of Big Data of Payment System Based on Kolmogorov–Shannon Coding Methods
308. Application of Image Analysis in Infrastructure Sector Fields—An Overview
309. A Framework of Runge–Kutta, Discontinuous Galerkin, Level Set and Direct Ghost Fluid Methods for the Multi-Dimensional Simulation of Underwater Explosions
310. Pressure transient behavior in a multilayer reservoir with formation crossflow
311. Big Data and the Studies of Communication in Brazil
312. Effects of wellbore irregularity on primary cementing of horizontal wells, part 2: Small scale effects
313. A bounded-confidence model of opinion dynamics on hypergraphs
314. SEISMIC SOIL–PILE-STRUCTURE INTERACTION ANALYSIS IN FREQUENCY DOMAIN USING FIXED BASE EIGEN VALUES USING TIME HISTRY METHOD.
315. Liquid–Liquid membrane contactors incorporating surface skin asymmetric hollow fibres of poly (4-methyl-1-pentene) for ammonium recovery as liquid …
316. Molecular Modeling for Corrosion Inhibitor Design

317. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets
318. Statistical test for anomalous diffusion based on empirical anomaly measure for Gaussian processes
319. Random Numbers and Simulation
320. The effects of ACRT on melt undercooling during the growth of CZT via the traveling heater method: Ekman versus Taylor-Görtler flows
321. Benchmarking and learning garbage collection delays for resource‐restricted graphical user interfaces
322. Adhesion strength, stability and electronic properties of TiB2 reinforced copper matrix composites: A first principles study
323. Rheological behaviour of attractive emulsions differing in droplet-droplet interaction strength
324. A hybrid numeric‐analytic solution for pulsed CEST
325. One can’t hear orientability of surfaces
326. Emergent gauge symmetries: making symmetry as well as breaking it

327. The coupled model of transient non-equilibrium interphase mass transfer rate of sliding bubble and two-phase flow in variable gradient drilling
328. Nonlinear inclusion theory with application to the growth and morphogenesis of a confined body
329. Finite element modeling of drainage holes and free surface within the complex seepage control structures: an overview
330. Ranked diffusion, delta Bose gas, and Burgers equation
331. Transformation Theory for Conduction Thermal Cloaking
332. Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis
333. Velocity-driven frictional sliding: Coarsening and steady-state pulses
334. Novel paraffin wax/ultra‐high molecular weight polyethylene composite phase change materials modified by carbon nanotubes with excellent combination property
335. Experimental and numerical studies on the heat transfer improvement of a latent heat storage unit using gradient tree-shaped fins
336. A Surface Energy Approach to Developing an Analytical Model for the Underfill Flow Process in Flip-Chip Packaging

337. Dispersion of Airborne Respiratory Saliva Droplets by Indoor Wake Flows
338. Recurrence analysis of friction based dry-couplant ultrasonic Lamb waves in plate-like structures
339. Membrane technologies for sports supplementation
340. Pore-Scaled investigation on dynamic carbonation mechanism of calcium oxide particles
341. Experimental Validation of Neural-Network-Based Nonlinear Reduced-Order Model for Vertical Sloshing
342. Review on Amphiphilic Ionic Liquids as New Surfactants: From Fundamentals to Applications
343. Apparent slip in colloidal suspensions
344. Implementation mobile app for foreign language acquisition based on structural visual method
345. Failure of the split property in gravity and the information paradox
346. Numerical simulation of methanol crossover in flowing electrolyte-direct methanol fuel cell

347. On a flexible multibody modelling approach using FE-based contact formulation for describing gear transmission error
348. Nonequilibrium in thermodynamic formalism: The second law, gases and information geometry
349. Experiments in Surface Gravity–Capillary Wave Turbulence
350. Improving gas barrier properties of sugarcane‐based LLDPE with cellulose nanocrystals
351. Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs
352. Experimental challenges in ion channel research: Uncovering basic principles of permeation and gating in potassium channels
353. Computationally efficient multiscale modeling for probabilistic analysis of CFRP composites with micro-scale spatial randomness
354. Review of Decision Support Systems and Allocation Models for Integrated Water Resources Management Focusing on Joint Water Quantity-Quality
355. Theoretical analysis of unsteady convective heat transfer from a flat plate with time-varying and spatially-varying temperature distribution
356. 3D numerical modeling of the effect of the drill string vibration cyclic loads on the wellbore natural fracture growth

357. Pressure-independent velocity error estimates for (Navier-) Stokes nonconforming virtual element discretization with divergence free
358. 3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing
359. Influence of pore space heterogeneity on mineral dissolution and permeability evolution investigated using lattice Boltzmann method
360. Direct Pore-Scale Simulations of Fully Periodic Unit Cells of Different Regular Lattices
361. Oxidation difference of microstructural bands in additive manufactured titanium alloy
362. The abrupt degradation of LiFePO4/graphite battery induced by electrode inhomogeneity
363. Chatter suppression in the milling process of the weakly-rigid workpiece through a moving fixture
364. A Novel Gelcast SiO2-Si3N4-BN Ceramic Composites for Radome Applications
365. Entropy generation minimization analysis of two immiscible fluids
366. A surrogate-based optimal likelihood function for the Bayesian calibration of catalytic recombination in atmospheric entry protection materials

367. An Arbitrary High Order Well-Balanced ADER-DG Numerical Scheme for the Multilayer Shallow-Water Model with Variable Density
368. Traveling wave vibration of graphene platelet reinforced porous joined conical-cylindrical shells in a spinning motion
369. Type reproduction number for epidemic models on heterogeneous networks
370. Postponing production exponentially enhances the molecular memory of a stochastic switch
371. Controllable perovskite crystallization via potassium pretreatment toward high-performance solar cells
372. Atmospheric propagation of space-fractional Gaussian-beam waves in a FSO communication system
373. Oscillation mitigation of hyperbolicity-preserving intrusive uncertainty quantification methods for systems of conservation laws
374. Comparison of interface capturing methods for the simulation of two-phase flow in a unified low-Mach framework
375. Integrated framework for SOH estimation of lithium-ion batteries using multiphysics features
376. Holistic Architecture

377. Green-chemical-jump-thickening polishing for silicon carbide
378. Filler‐size‐dependent dynamic mechanical properties of polyethylene glycol/zircon composites
379. Simulation of deformation and decomposition of droplets exposed to electro-hydrodynamic flow in a porous media by lattice Boltzmann method
380. Understanding components of mobility during the COVID-19 pandemic
381. Numerical simulation of molten pool formation during laser transmission welding between PET and SUS304
382. Wine Analytics: Futures or Bottles?
383. Modelling of Ultrasonic Wave Propagation Through the Border of Two Mediums
384. Symptoms of architecture erosion in code reviews: A study of two OpenStack projects
385. A peridynamic model for crevice corrosion damage
386. Effects of gradient porous metal foam on the melting performance and energy storage of composite phase change materials subjected to an internal heater: A …

387. Comparative and sensitive analysis on the filling, operating and performance patterns between the solar gravity heat pipe and the traditional gravity heat pipe
388. Numerical analysis of the effect of trapezoidal baffles inside fuel and air channels on the performance of a planar-type Solid Oxide Fuel Cell
389. Investigation on the aggregation structure of nanoparticle on the thermal conductivity of nanofluids by molecular dynamic simulations
390. A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects
391. Input addition and deletion in reinforcement: towards protean learning
392. Early Wear Fault Dynamics Analysis Method of Gear Coupled Rotor System Based on Dynamic Fractal Backlash
393. A predictive model for next cycle start date that accounts for adherence in menstrual self-tracking
394. The mechanism of gas-water extraction in micro-and nanoscale pores in shale gas reservoirs: Based on gas-water interactions
395. A review on heavy metal ions adsorption from water by layered double hydroxide and its composites
396. Collective minds: social network topology shapes collective cognition

397. Composite emulsifying behavior of egg white protein and rhamnolipid: Properties of the constructed high internal phase emulsions
398. Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending
399. Development of novel biocomposites based on the clean production of microbial cellulose from dairy waste (sour whey)
400. An Exhaustive Exploration of Electromagnetism for Underwater Wireless Sensor Networks
401. Characteristics of the multiphase flow field with super-cavitation induced by successively fired projectiles under-water and cross-medium
402. Electrospun Poly (ω-pentadecalactone-co-ε-caprolactone)/Gelatin/Chitosan Ternary Nanofibers with Antibacterial Activity for Treatment of Skin Infections
403. Computational Mechanics of Fluid-Structure Interaction
404. A friction model of fractal rough surfaces accounting for size dependence at nanoscale
405. Green synthesis of poly(o‐phenylenediamine) polymer film on stainless steel as a corrosion protection layer
406. Pressure infiltration of molten aluminum for densification of environmental barrier coatings

407. Breakup model of oscillating drops in turbulent flow field
408. Algorithms for activity correction models for geochemical speciation and reactive transport modeling
409. Co-evolution of Opinion and Social Tie Dynamics Towards Structural Balance∗
410. Role of near-wall dynamics in roughness aided turbulent Rayleigh-Bénard convection
411. Experimental and computational investigation of flow boiling in microgravity
412. Melting and energy storage characteristics of macro-encapsulated PCM-metal foam system
413. Magnetic field-induced control of a compound ferrofluid droplet deformation and breakup in shear flow using a hybrid lattice Boltzmann-finite difference method
414. The philosophy of social ecology: Essays on dialectical naturalism
415. Separately global solutions to rate-independent processes in large-strain inelasticity
416. Study of multilayered composites through periodic homogenization and Mori–Tanaka methods

417. Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review
418. Microstructure evolution and fracture mechanism of a TiAl–Nb alloy during high-temperature tensile testing
419. Strain partitioning and damage initiation in a continuously cooled carbide free bainitic steel
420. A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness
421. Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution
422. Numerical investigation of thermomechanical response of multiscale porous ultra-High temperature ceramics
423. Computational fluid dynamics (CFD), artificial neural network (ANN) and genetic algorithm (GA) as a hybrid method for the analysis and optimization of micro …
424. Interference effect on tsunami generation by segmented seafloor deformations
425. Design and dynamic performance of a concentrated photovoltaic system with vapor chambers cooling
426. Generation and dynamics of soliton and soliton molecules from a VSe2/GO-based fiber laser

427. Effect of Cassie-Baxter versus Wenzel states on ice adhesion: A fracture toughness approach
428. Fuzzy inference system application for oil-water flow patterns identification
429. Architectural characteristics of different configurations based on new geometric determinations for the conoid
430. Effect of pipeline surface roughness on peak impact forces caused by hydrodynamic submarine mudflow
431. Systems Biology
432. A review of behavioral methods for the evaluation of cognitive performance in animal models: Current techniques and links to human cognition
433. A solution method for free vibration of intact and cracked polygonal thin plates using the Ritz method and Jacobi polynomials
434. Local asymptotic stability of a system of integro-differential equations describing clonal evolution of a self-renewing cell population under mutation
435. Parametric study of bow slamming for a KRISO container ship
436. QCD factorization and quantum mechanics

437. Numerical simulation for hydrocarbon production analysis considering Pre-Darcy flow in fractured porous media
438. A Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador
439. Dripping instability of a two-dimensional liquid film under an inclined plate
440. Bimetallic [email protected] Ti3C2Tx MXene derived composites for broadband microwave absorption
441. Investigations into the drying kinetics of biomass in a fluidized bed dryer using electrostatic sensing and digital imaging techniques
442. Machine-learning-driven on-demand design of phononic beams
443. Modelling stress-induced permeability alterations in sandstones using CT scan-based representations of the pore space morphology
444. Energy minimizers for an asymptotic MEMS model with heterogeneous dielectric properties
445. Experimental and numerical studies on non-equilibrium gaseous solvent dissolution in heavy oil: A continuum-scale approach based on bubble-scale dissolution …
446. A specialized review on outlook of future Cyber-Physical Power System (CPPS) testbeds for securing electric power grid

447. Optimization of physico-chemical and membrane filtration processes to remove high molecular weight polymers from produced water in enhanced oil recovery …
448. Magnetoresponsive biocomposite hydrogels comprising gelatin and valine based magnetic ionic liquid surfactant as controlled release nanocarrier for drug …
449. Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities
450. New poly (lactic acid) composites produced from coffee beverage wastes
451. Characterizing alternating bubbles emerging from two interacting vertical gas jets in a liquid
452. Electrical properties of ZnO films implanted with rare earth and their relationship with structural and optical parameters
453. Cooling effect of droplet impacting on heated solid surface
454. A review on the transmission of COVID-19 based on cough/sneeze/breath flows
455. Multi-Hit Impact Resistance of Masonry Walls Under Large Mass
456. Nucleation and growth in solution synthesis of nanostructures–From fundamentals to advanced applications

457. A numerical study of the effects of cathode geometry on tungsten inert gas type electric arcs
458. Performance Analysis of a Neuro-Fuzzy Algorithm in Human-Centered and Non-invasive BCI
459. TINYV3RSE: The DART Vision-Based Navigation Test-bench
460. The case for a common software library and a set of enumerated benchmark problems in computer-aided molecular design
461. Nonlinear Photonics
462. Modelling density of pure and binary mixtures of normal alkanes: Comparison of hybrid soft computing techniques, gene expression programming, and equations of …
463. Modeling SARS-CoV-2: mitigation interventions and increased mobility events
464. Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
465. Properties of Turbulence
466. Handling Neumann and Robin boundary conditions in a fictitious domain volume penalization framework

467. CFD-PBE coupled model for size-driven segregation in polydisperse granular flows
468. Effect of Self-Induced Body Vibrations on Thrust Generation in Bio-inspired Flying Robots
469. Cómo coadyuvan los modelos matemáticos a entender y combatir a la COVID-19
470. Control of transients in drinking water networks
471. Constitutional Provision in Protecting and Managing Indigenous Knowledge Systems: A Case From Rakhain Community in Bangladesh
472. A survey on Hilbert-Huang transform: Evolution, challenges and solutions
473. Modelling Thermal Conduction in Polydispersed and Sintered Nanoparticle Aggregates
474. Robust analysis of phylogenetic tree space
475. A hele-shaw limit without monotonicity
476. Loop-free tensor networks for high-energy physics

477. Systems analysis of the mechanisms governing the cardiovascular response to changes in posture and in peripheral demand during exercise
478. Wall-modeled large eddy simulations of a turbulent boundary layer over the Boeing speed bump at ReL = 2 million
479. Working Condition Monitoring and Virtual Simulation Method
480. Detailed DFT/MD simulation, surface analysis and electrochemical computer explorations of aldehyde derivatives for mild steel in 1.0 M HCl
481. Nonlinear size-dependent bending and forced vibration of internal flow-inducing pre-and post-buckled FG nanotubes
482. A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly (lactic acid) and poly (lactic acid) hybrid composites
483. Enhancing CO 2 photoreduction over ZIF-based reticular materials by morphology control of Au plasmonic nanoparticles
484. Electrospun polystyrene/graphene oxide fibers applied to the remediation of dye wastewater
485. Bone Ingrowth Around an Uncemented Femoral Implant Using Mechanoregulatory Algorithm: A Multiscale Finite Element Analysis
486. The influence of inflow swirls on phases separation in a Venturi tube

487. Permeability Decline by Clay Fines Migration around a Low‐Salinity Fluid Injection Well
488. Modeling of gas viscosity at high pressure-high temperature conditions: Integrating radial basis function neural network with evolutionary algorithms
489. A parallel cell-centered adaptive level set framework for efficient simulation of two-phase flows with subcycling and non-subcycling
490. Formation process of zirconia nanotubes and porous structures and model of oxygen bubble growth
491. A computational framework for rheologically complex thermo-visco-elastic materials
492. Unequal impact and spatial aggregation distort covid-19 growth rates
493. Drop Impact Dynamics: Impact Force and Stress Distributions
494. Indexed bibliography of genetic algorithms in physical sciences
495. Fully implicit two-phase VT-flash compositional flow simulation enhanced by multilayer nonlinear elimination

1. The impact of multiple-component PFAS solutions on fluid-fluid interfacial adsorption and transport of PFOS in unsaturated porous media
2. Investigation of the Effect of 3D Meniscus Geometry on Fluid Dynamics and Crystallization via In Situ Optical Microscopy‐Assisted Mathematical Modeling
3. Physical and Mathematical Modelling of Fluid and Heat Transport Phenomena in Porous Media
4. Acceptance of personalized e-learning systems: a case study of concept-effect relationship approach on science, technology, and mathematics courses
5. Using mathematical modelling to identify data requirements for increased prediction accuracy in radiotherapy
6. A mathematical model for CO2 conversion of CH4-producing biocathodes in microbial electrosynthesis systems
7. Critical Review of Emulsion Stability and Characterization Techniques in Oil Processing
8. Rapid eutectic growth: from rod growth to diffusionless solidification
9. Stress analysis of elastic bi-materials by using the localized method of fundamental solutions
10. Variability of complex oscillatory regimes in the stochastic model of cold-flame combustion of a hydrocarbon mixture

11. Reflection and transmission of waves at the common interface of piezoelectric half-spaces with microstructure
12. A screening model for quantifying PFAS leaching in the vadose zone and mass discharge to groundwater
13. A mathematical modelling of multiphysics-based propagation characteristics of surface wave in piezoelectric-hydrogel layer on an elastic substrate
14. DATA: Diafiltration Apparatus for high-Throughput Analysis
15. Mathematical modeling for bubbling fluidized bed CO-methanation reactor incorporating the effect of circulation and particle flows
16. Effective interface conditions for continuum mechanical models describing the invasion of multiple cell populations through thin membranes
17. Challenges of numerical simulation of dynamic wetting phenomena: a review
18. Mathematical model of two-phase Taylor flow hydrodynamics for four combinations of non-Newtonian and Newtonian fluids in microchannels
19. Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions
20. Coloured-noise-induced transport in a model of the thermochemical reactor

21. A review on mathematical modelling of Direct Internal Reforming-Solid Oxide Fuel Cells
22. Structure diagram and dynamics of formation of hexagonal boron nitride in phase-field crystal model
23. Effect of fluorocarbon surfactants on the adsorption of hydrocarbon surfactants mixture at the water-air interface
24. Optimal convergence analysis of the energy-preserving immersed weak Galerkin method for second-order hyperbolic interface problems in inhomogeneous media

25. Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

26. Instability of a planar fluid interface under a tangential electric field in a stagnation point flow
27. Boiling crisis due to bubble interactions
28. Hydrothermal variations of radiative nanofluid flow by the influence of nanoparticles diameter and nanolayer
29. Mathematical modeling of physical processes in metals and ordered alloys
30. Optimization of battery charging strategy based on nonlinear model predictive control
31. Predicting concurrent structural mechanical mechanisms during microstructure evolution
32. Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence
33. Characteristics of thermophoresis and Brownian motion on radiative reactive micropolar fluid flow towards continuously moving flat plate: HAM solution
34. A theoretical and numerical analysis of a Dirichlet-Neumann domain decomposition method for diffusion problems in heterogeneous media
35. Continuum and Molecular Dynamics Studies of the Hydrodynamics of Colloids Straddling a Fluid Interface

36. Modelling of defects in aluminium cast products
37. Modelling of hemodynamics in bifurcation lesions of coronary arteries before and after myocardial revascularization
38. Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys
39. Role of zirconia phase transformation, interface processes, and Ta2O5 doping on the blistering phenomenon of molten glass in contact with zirconia-based …
40. Simulation of electric field control effects on the ion transport in proton exchange membranes for application in fuel cells and electrolysers
41. Calcium Signaling in the Photodamaged Skin: In Vivo Experiments and Mathematical Modeling
42. On ultrasound propagation in composite laminates: advances in numerical simulation
43. ALPACA-a level-set based sharp-interface multiresolution solver for conservation laws
44. Investigation of a sintering phenomenon through master sintering curve based on python software
45. Improving single-lap joint load bearing by bioinspired interlocking patterns on substrates

46. A phase field model for hydrogen-assisted fatigue
47. Depth-averaged coupling of submerged granular deformation with fluid flow: An augmented HLL scheme
48. Investigating the Unsteady Shock Bubble Multiphase Interactions
49. Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains
50. Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification
51. DEM-BEM coupling in time domain for one-dimensional wave propagation
52. Atomic-scale growth, imaging, spectroscopy, and electronic transport properties of metal-oxide films and interfaces
53. Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach
54. Thermal flow characteristics and the evolution of laser absorption in laser powder bed fusion of Cu-Cr-Zr alloy
55. Analysis of Damage and Failure mechanism under a lubricated slipper/swashplate interface in Axial Piston Machines

56. Thermoelectric Generators: A comprehensive review of characteristics and applications
57. Experimental study of the shear strength of a snow-mortar interface
58. Assisting/opposing/forced convection flow on entropy‐optimized MHD nanofluids with variable viscosity: Interfacial layer and shape effects
59. Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting
60. Modelling the adsorption of proteins to nanoparticles at the solid-liquid interface
61. Beam wobbling effects on laser transmission welding of dissimilar polymers: Experiments, modeling, and process optimization
62. Induced side-branching in smooth and faceted dendrites: theory and phase-field simulations
63. Simulation of Performance and Emissions Related Parameters in a Thermal Engine Using a Deep Learning Approach
64. Human cumulative culture and the exploitation of natural phenomena
65. Amorphization and nanocrystal formation in a Pd–Ni–Cu–P alloy after cooling under different conditions

66. Fuzzy Dynamical System in Alcohol-Related Health Risk Behaviors and Beliefs
67. Modelling of liquid film migration in Al-Cu alloys
68. A dynamic model of CO2 diffusion coefficient in shale based on the whole process fitting
69. Modeling polymer-metal frictional interface using multi-asperity contact theory
70. Does Machine Learning Offer Added Value vis-à-vis Traditional Statistics? An Exploratory Study on Retirement Decisions Using Data from the Survey of Health …
71. Simulation of Fracture Formation in Solid Oxide Fuel Cell Anode Using Peridynamic Modeling Method
72. Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation
73. Leveraging Prediction and Reflection in a Computational Setting to Enrich Undergraduate Students’ Combinatorial Thinking
74. Secondary and Tertiary Oil Recovery Processes
75. Investigation of the blast pressure following laser ablation at a solid–fluid interface using shock waves dynamics in air and in water

76. Investigation of the low-frequency stray current induced corrosion on reinforced concrete infrastructure in high-speed rail transit power supply system
77. Modeling nonlinear bending of axisymmetric circular nano-plates in framework of Ru’s surface stress elasticity theory
78. Modeling of the sedimentation process of monodisperse suspension
79. On Seawater Conductivity Control by Acoustic Radiation
80. Robust state-feedback stabilization of an underactuated network of interconnected n+ m hyperbolic PDE systems
81. Role of liquid and solid particles in solid-liquid mixed fluxes on sulfur removal from molten iron under centrifugal stirring by an impeller
82. Thin-film Rayleigh–Taylor instability in the presence of a deep periodic corrugated wall
83. Optothermal grid activation of microflow with magnetic nanoparticle thermophoresis for microfluidics
84. Modeling and simulation for estimating thin film lubrication effects on flow of Jeffrey liquid by a spiraling disk
85. Digitally-transformed early-warning protocol for membrane cleaning based on a fouling-cumulative sum chart: Application to a full-scale MBR plant

86. Analysis of fabrication and crack-induced porosity migration in mixed oxide fuels for sodium fast reactors by the finite element method
87. Modeling of micro-channel critical flow with inlet sub-cooling: Metastable liquid and nucleation
88. Structure–properties‐performance relationships in complex epoxy nanocomposites: A complete picture applying chemorheological and thermo‐mechanical kinetic …
89. Thermo-mechanical coupling shock waves propagation with phase transition under impact loading
90. Boundary integral formulations for acoustic modelling of high-contrast media
91. Design and Simulation of MEMS Based Capacitive Accelerometer
92. A non-standard numerical method for finite element modelling of tensile cracks in quasi-brittle material
93. The applicability of shungite as an electrically conductive additive in cement composites
94. A federated learning method for network intrusion detection
95. A hybrid partitioned deep learning methodology for moving interface and fluid–structure interaction

96. On the crystal growth kinetics of ultra‐toughened biobased polyamide 410: New insights on dynamic crystallization
97. Riemann solvers of a conserved high-order traffic flow model with discontinuous fluxes
98. Toward a Mechanistic Account of Extended Cognition
99. On the Development of Icephobic Surfaces: Bridging Experiments and Simulations
100. Competing spreading dynamics in simplicial complex
101. Local thermal non-equilibrium (LTNE) effects on thermal-free convection in a nanofluid-saturated horizontal elliptical non-Darcian porous annulus
102. Feature-based modeling for industrial processes in the context of digital twins: A case study of HVOF process
103. Further enhancement of the particle shifting technique: Towards better volume conservation and particle distribution in SPH simulations of violent free-surface flows
104. Epoxy-based/BaTiO3 nanodielectrics: Relaxation dynamics, charge transport and energy storage
105. Numerical assessment of thermal characteristics of metal foams of orderly varied pore density and porosity under different convection regimes

106. Modeling the recent outbreak of COVID-19 in India and its control strategies
107. Computation of unsteady generalized Couette flow and heat transfer in immiscible dusty and non‐dusty fluids with viscous heating and wall suction effects using a …
108. Analysis of adverse influence of metal vapor to arc movement between electrodes with external magnetic field applied by numerical simulation
109. Towards quantum simulations in particle physics and beyond on noisy intermediate-scale quantum devices
110. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites
111. A critical review on the electrosorption of organic compounds in aqueous effluent–Influencing factors and engineering considerations
112. Dip coating of cylinders with Newtonian fluids
113. Sub-Sampled Imaging for STEM: Maximising Image Speed, Resolution and Precision Through Reconstruction Parameter Refinement
114. Pore-scale study of the multiphase methane hydrate dissociation dynamics and mechanisms in the sediment
115. On geometrical properties of electromagnetic transmission eigenfunctions and artificial mirage

116. Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction
117. Impact of Respiratory Fluctuation on Hemodynamics in Human Cardiovascular System: A 0-1D Multiscale Model
118. Density-based turbulence damping at large-scale interface for Reynolds-averaged two-fluid models
119. Intelligent Design Optimization System for Additively Manufactured Flow Channels Based on Fluid–Structure Interaction
120. Induced magnetic field and viscous dissipation on flows of two immiscible fluids in a rectangular channel
121. A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer
122. Analysis of entropy generation in AA7072-methanol and AA7072+ AA7075-methanol flow near a parabolic surface
123. Multiscale topology optimization for graded cellular structures based on level set surface cutting
124. Marangoni convection flow of γ–Al2O3 nanofluids past a porous stretching surface with thermal radiation effect in the presence of an inclined magnetic field
125. Alkaline flooding

126. Nonmonotonic Pair Potentials in the Interaction of Like-Charged Objects in Solution
127. A Seamless, Extended DG Approach for Advection–Diffusion Problems on Unbounded Domains
128. 多模态瑞利-泰勒不稳定性的离散玻尔兹曼数值研究
129. Study of Parameters Influencing on the Performance of SiNW ISFET Sensor
130. Numerical analysis and safety design of grounding systems in underground compact substations
131. Pathway modeling and simulation analysis
132. A study of the generalized nonlinear advection-diffusion equation arising in engineering sciences
133. Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel
134. Sources of funding CSF
135. Dynamic magnetic birefringence in a viscoelastic ferrocolloid

136. Accelerated weathering effects on mechanical, thermal and viscoelastic properties of kenaf/pineapple biocomposite laminates for load bearing structural applications
137. Indexical AI
138. A numerical integration strategy of meshless numerical manifold method based on physical cover and applications to linear elastic fractures
139. Steepened wave in two-phase Chaplygin flows comprising a source term
140. A two-phase three-field modeling framework for heat pipe application in nuclear reactors
141. Effect of surfactant addition and viscosity of the continuous phase on flow fields and kinetics of drop formation in a flow-focusing microfluidic device
142. Update on emerging technologies including novel applications: radio frequency
143. Fundamental fluid dynamics challenges in inkjet printing
144. A stochastic model for nanoparticle deposits growth
145. Finite state graphon games with applications to epidemics

146. An analytical solution on spontaneous imbibition coupled with fractal roughness, slippage and gravity effects in low permeability reservoir
147. Diffusion, aggregation and electrokinetics
148. Influence of asphaltenes and resins on water/model oil interfacial tension and emulsion behavior: Comparison of extracted fractions from crude oils with different …
149. Volume of fluid-based numerical analysis of a pump-driven phase change heat transport device
150. Resolvent Estimates for a Compressible Fluid Model of Korteweg Type and Their Application
151. A comprehensive study of droplet formation in a capillary embedded step T-junction: From squeezing to jetting
152. Generalized thermal investigation of unsteady MHD flow of Oldroyd-B fluid with slip effects and Newtonian heating; a Caputo-Fabrizio fractional model
153. Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures
154. Effect of ionic liquids on thermomechanical properties of polyetheretherketone‐multiwalled carbon nanotubes nanocomposites
155. A melamine‐based covalent organic framework nanomaterial as a nanofiller in polyethersulfone mixed matrix membranes to improve separation and antifouling …

156. Data-Driven optimization of blast furnace iron making process using evolutionary deep learning
157. Provably non-stiff implementation of weak coupling conditions for hyperbolic problems
158. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites
159. An alternating-direction hybrid implicit-explicit finite-difference time-domain method for the Schrödinger equation
160. Co-encapsulation of curcumin and β-carotene in Pickering emulsions stabilized by complex nanoparticles: Effects of microfluidization and thermal treatment
161. Modified nanocrystalline cellulose partially replaced carbon black to reinforce natural rubber composites
162. Modeling of cooling and heat conduction in permanent mold casting process
163. Smooth finite element construction and correction method based on hybrid FE-SEA model
164. Implications of capillarity-wettability interaction on geometrically mediated droplet splitting mechanism
165. Wave power extraction for an oscillating water column device consisting of a surging front and back lip-wall: An analytical study

166. Impacts of wave-induced ocean surface turbulent kinetic energy flux on typhoon characteristics
167. An iterative analytical model for aging analysis of Li-ion cells
168. Effect of interfacial damping on high-frequency surface wave resonance on a nanostrip-bonded substrate
169. Experimental characterisation of sloshing tank dissipative behaviour in vertical harmonic excitation
170. Modelling of environmental ageing of polymers and polymer composites—modular and multiscale methods
171. On the selective laser melting based additive manufacturing of AlSi10Mg: The process parameter investigation through multiphysics simulation and experimental …
172. Isogeometric multilevel quadrature for forward and inverse random acoustic scattering
173. Using incomplete complex modes for model updating of monopiled offshore wind turbines
174. How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes?
175. Open capillary siphons

176. Modeling and simulation of a multi-bed industrial reactor for renewable diesel hydroprocessing
177. Reflectance Spectra Analysis Algorithms for the Characterization of Deposits and Condensed Traces on Surfaces
178. Numerical simulation of fuel dribbling and nozzle wall wetting
179. Dynamical analysis of two-pathogen coinfection in influenza and other respiratory diseases
180. Collaborative Decision-Making Centres for Sustainable Energy
181. Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology
182. A collaborative design platform for new alloy material development
183. Surface engineering and on-site charge neutralization for the regulation of contact electrification
184. Synthesis of PVDF‐B4C mixed matrix membrane for ultrafiltration of protein and photocatalytic dye removal
185. Nonconforming time discretization based on Robin transmission conditions for the Stokes–Darcy system

186. Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology
187. Atomistic elucidation of mechanical properties and fracture phenomenon of defective indium selenide monolayer
188. Insights into fracture mechanisms and strength behaviors of two-dimensional carbon fiber reinforced silicon carbide composites at elevated temperatures
189. Longitudinal remagnetization of uniaxial antiferromagnetic nanoparticles: the role of spontaneous magnetic moment
190. Progress and challenges on the thermal management of electrochemical energy conversion and storage technologies: Fuel cells, electrolysers, and …
191. Solution landscape of the Onsager model identifies non-axisymmetric critical points
192. Quantification of gas exsolution and preferential diffusion for alkane solvent (s)–CO2–heavy oil systems under nonequilibrium conditions
193. Fire whirls: a combustion science perspective
194. Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges
195. Effects of Textured Surfaces on Skin Friction

196. Dynamics of evaporating respiratory droplets in the vicinity of vortex dipoles
197. Direct observations of ultrasonically generated hot spots in polymer composite energetic materials
198. Surfactants and nanoscience
199. Friction-induced vibration of a slider-on-rotating-disc system considering uniform and non-uniform friction characteristics with bi-stability
200. Unsteady mixed convection flow of magneto-Williamson nanofluid due to stretched cylinder with significant non-uniform heat source/sink features
201. Interface sintering engineered superhydrophobic and durable nanofiber composite for high-performance electromagnetic interference shielding
202. Carbon dioxide diffusions in methane-dissolved pore fluids: implications for geological carbon storage and utilization in tight formations
203. Fractal dimension of India using multicore parallel processing
204. Stability-based optimization of ACRT for the growth of CZT by the traveling heater method
205. Smart healthcare security device on medical IoT using raspberry pi

206. Tribology—A Tool for Mechanical and Industrial Engineering
207. A Second Order Energy Dissipative Scheme for Time Fractional L 2 Gradient Flows using SAV Approach
208. Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency
209. Effects of low frequency multi-mode ultrasound and it’s washing solution’s interface properties on freshly cut cauliflower
210. An approach to simulate gas-solid flow systems with process controllers
211. Nonreciprocal and non-Hermitian material response inspired by semiconductor transistors
212. Theory and applications of new fractional-order chaotic system under Caputo operator
213. Numerical analysis on stability of functionally graded graphene platelets (GPLs) reinforced dielectric composite plate
214. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components
215. Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy

216. Unsteady aerodynamic forces on a tapered prism during the combined vibration of VIV and galloping
217. Bounds on quantum information storage and retrieval
218. Assembly techniques for proton exchange membrane fuel cell stack: A literature review
219. Moving parallel and transversal lines with touches on smartphones: a look through screenrecording
220. Behavioural response to heterogeneous severity of COVID-19 explains temporal variation of cases among different age groups
221. Non-extensive thermodynamic entropy to predict the dynamics behavior of COVID-19
222. Existence and Exponential Behavior for the Stochastic 2D Cahn–Hilliard–Oldroyd Model of Order One
223. Usefulness of PCM in building applications focusing on envelope heat exchange–Energy saving considering two scenarios
224. The Personalization of Learners’ Educational Paths E-learning
225. Exploiting low-grade waste heat to produce electricity through supercapacitor containing carbon electrodes and ionic liquid electrolytes

226. Deflection Modelling of MEMS Cantilever Beam Through Collocation Method Taking B-Splinesas Approximating Functions
227. Rheological approach to the adhesion property of metal‐plated acrylonitrile‐butadiene‐styrene to secure the driver’s safety
228. Thermodynamics of (nano) interfaces
229. Eigenfunction-based solution for one-dimensional solid-liquid phase change heat transfer problems with advection
230. Dynamics of deformable contacting bodies with sliding, rolling, and spinning
231. Self-consistent magneto-hydrodynamic modeling of ICP discharges
232. From point particles to body points
233. Estimating thermal properties of phase change material from heat flux measurements
234. A simple model for how the risk of pandemics from different virus families depends on viral and human traits
235. Repercussions of homogeneous and heterogeneous reactions of 3D flow of Cu-water and AL2O3-water nanofluid and entropy generation estimation along …

236. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys
237. Long-time dynamics of the Cahn–Hilliard equation with kinetic rate dependent dynamic boundary conditions
238. Investigation of MHD Casson fluid flow past a vertical porous plate under the influence of thermal diffusion and chemical reaction
239. Unsteady MHD oscillatory Casson fluid flow past an inclined vertical porous plate in the presence of chemical reaction with heat absorption and Soret effects
240. Influence of finite size of ions on thermal transport of a simultaneous electrokinetic-pressure driven flow of power-law fluids in a slit microchannel
241. Effect of interface deformation on hydrodynamics of liquid–liquid two-phase flow in a confined microchannel
242. Electrokinetic energy conversion of fluids with pressure-dependent viscosity in nanofluidic channels
243. A mixture theory analysis for reflection phenomenon of homogeneous plane-P1-wave at the boundary of unsaturated porothermoelastic media
244. Multiple Thixotropisms of Liquid Limit–Consistency Clays Unraveled by Multiscale Experimentation
245. Synergetic optimization of charge transport and breakdown strength of epoxy nanocomposites: Realizing sandwich topological structure through constructing a SiC …

246. Glare: A free and open-source software for generation and assessment of digital speckle pattern
247. Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT
248. Hybrid scanning electrochemical cell microscopy-interference reflection microscopy (SECCM-IRM): tracking phase formation on surfaces in small volumes
249. Effect of crump rubber on the solid particle erosion response of epoxy composites
250. Topology optimization for stability problems of submerged structures using the TOBS method
251. Effects of wall temperature and temperature-dependent viscosity on maximum spreading of water-in-oil emulsion droplet
252. Hydrocarbon emission control of a hydrocarbon adsorber and converter under cold start of the gasoline engine
253. REST-for-Physics, a ROOT-based framework for event oriented data analysis and combined Monte Carlo response
254. A perturbation method for evaluating the magnetic field induced from an arbitrary, asymmetric ocean world analytically
255. A comparative study of different types of sandwiched structures of SPR biosensor for sensitive detection of ssDNA

256. Educational psychology is evolving to accommodate technology, multiple disciplines, and Twenty-First-Century skills
257. Influence of mineralogy and surfactant concentration on zeta potential in intact sandstone at high pressure
258. A temperature-dependent atomistic-informed phase-field model to study dendritic growth
259. Scalar auxiliary variable approach for conservative/dissipative partial differential equations with unbounded energy functionals
260. Enhancing performance for three-phase induction motor by changing the magnetic flux density and core material using COMSOL
261. A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters
262. Experimental investigation and multiparameter analysis of variable conductance heat pipes
263. The Phenomenon of Electroporation
264. The existence of periodic solutions to doubly degenerate Allen-Cahn equation with Neumann boundary condition
265. Ferroelectric-HfO2/oxide interfaces, oxygen distribution effects, and implications for device performance

266. Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel
267. Three-dimensional physical simulation of water huff-n-puff in a tight oil reservoir with stimulated reservoir volume
268. Adaptive fuzzy global coupled nonsingular fast terminal sliding mode control of n-rigid-link elastic-joint robot manipulators in presence of uncertainties
269. Threshold Dynamics of an HIV-TB Co-infection Model with Multiple Time Delays
270. Harmful behaviour through plasmid transfer: a successful evolutionary strategy of bacteria harbouring conjugative plasmids
271. Study of Rivulet Flow Through Small Channels
272. Inlet Diffusor Buoyancy–Its Historical Use in Supersonic Transport Design
273. Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites
274. Nonlinear behaviors of the disc brake system under the effect of wheel− rail adhesion
275. Low Gravity Natural Convection and Pool Boiling Predictions

276. Polymer surface characterization
277. OpenMP application experiences: Porting to accelerated nodes
278. Anticipating critical transitions in psychological systems using early warning signals: Theoretical and practical considerations.
279. Why did cybernetics disappear from Latin America?
280. Anti-cavitation optimal design and experimental research on tidal turbines based on improved inverse BEM
281. Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer
282. Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by …
283. Epitaxial growth by atomic layer deposition and properties of high-k barium strontium titanate on Zintl-templated Ge (001) substrates
284. Experimental investigation and analytical modeling for blade-casing rubbing force
285. A Virtual Element Method for the wave equation on curved edges in two dimensions

286. CFD MODELING OF MICROCHANNELS COOLING FOR ELECTRONIC MICRODEVICES
287. Property enhancement in flexible poly (vinylidene fluoride)‐based piezoelectric films with large‐area preparation
288. A novel material based on deep eutectic solvents and its application in in‐situ modified silica‐reinforced styrene‐butadiene rubber
289. Internal flow phenomena of a Pump–Turbine model in turbine mode with different Thoma numbers
290. Preparation and properties enhancement of poly (lactic acid)/calcined‐seashell biocomposites for 3D printing applications
291. A Mechanics-Informed Artificial Neural Network Approach in Data-Driven Constitutive Modeling
292. Thermodynamic equilibrium and kinetic study of lanthanum chloride heptahydrate dehydration for thermal energy storage
293. Review of foam stability in porous media: The effect of coarsening
294. Household slow sand filters operating in continuous and intermittent flows: Computational fluid dynamics simulation and validation by tracer experiments
295. A numerical approach to investigate the impact of acid-asphaltene sludge formation on wormholing during carbonate acidizing

296. xc

297. Interface-Type Resistive Switching in Perovskite Materials
298. Hairpin RNA genetic algorithm based ANFIS for modeling overhead cranes
299. A quantitative assessment of the model form error of friction models across different interface representations for jointed structures
300. Limiting amplitude principle and resonances in plasmonic structures with corners: numerical investigation
301. Mesoscale perspective on the Tolman length
302. Hierarchical flaky porous carbon derived from waste polyimide film for high‐performance aqueous supercapacitor electrodes
303. A mortar formulation for frictionless line-to-line beam contact
304. A novel methodology to estimate the state-of-health and remaining-useful-life of a Li-ion battery using discrete Fourier transformation
305. Variability Estimation in Resistive Switching Devices, a Numerical and Kinetic Monte Carlo Perspective
306. eQuilibrator 3.0: a database solution for thermodynamic constant estimation

307. Metric Analysis of Big Data of Payment System Based on Kolmogorov–Shannon Coding Methods
308. Application of Image Analysis in Infrastructure Sector Fields—An Overview
309. A Framework of Runge–Kutta, Discontinuous Galerkin, Level Set and Direct Ghost Fluid Methods for the Multi-Dimensional Simulation of Underwater Explosions
310. Pressure transient behavior in a multilayer reservoir with formation crossflow
311. Big Data and the Studies of Communication in Brazil
312. Effects of wellbore irregularity on primary cementing of horizontal wells, part 2: Small scale effects
313. A bounded-confidence model of opinion dynamics on hypergraphs
314. SEISMIC SOIL–PILE-STRUCTURE INTERACTION ANALYSIS IN FREQUENCY DOMAIN USING FIXED BASE EIGEN VALUES USING TIME HISTRY METHOD.
315. Liquid–Liquid membrane contactors incorporating surface skin asymmetric hollow fibres of poly (4-methyl-1-pentene) for ammonium recovery as liquid …
316. Molecular Modeling for Corrosion Inhibitor Design

317. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets
318. Statistical test for anomalous diffusion based on empirical anomaly measure for Gaussian processes
319. Random Numbers and Simulation
320. The effects of ACRT on melt undercooling during the growth of CZT via the traveling heater method: Ekman versus Taylor-Görtler flows
321. Benchmarking and learning garbage collection delays for resource‐restricted graphical user interfaces
322. Adhesion strength, stability and electronic properties of TiB2 reinforced copper matrix composites: A first principles study
323. Rheological behaviour of attractive emulsions differing in droplet-droplet interaction strength
324. A hybrid numeric‐analytic solution for pulsed CEST
325. One can’t hear orientability of surfaces
326. Emergent gauge symmetries: making symmetry as well as breaking it

327. The coupled model of transient non-equilibrium interphase mass transfer rate of sliding bubble and two-phase flow in variable gradient drilling
328. Nonlinear inclusion theory with application to the growth and morphogenesis of a confined body
329. Finite element modeling of drainage holes and free surface within the complex seepage control structures: an overview
330. Ranked diffusion, delta Bose gas, and Burgers equation
331. Transformation Theory for Conduction Thermal Cloaking
332. Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis
333. Velocity-driven frictional sliding: Coarsening and steady-state pulses
334. Novel paraffin wax/ultra‐high molecular weight polyethylene composite phase change materials modified by carbon nanotubes with excellent combination property
335. Experimental and numerical studies on the heat transfer improvement of a latent heat storage unit using gradient tree-shaped fins
336. A Surface Energy Approach to Developing an Analytical Model for the Underfill Flow Process in Flip-Chip Packaging

337. Dispersion of Airborne Respiratory Saliva Droplets by Indoor Wake Flows
338. Recurrence analysis of friction based dry-couplant ultrasonic Lamb waves in plate-like structures
339. Membrane technologies for sports supplementation
340. Pore-Scaled investigation on dynamic carbonation mechanism of calcium oxide particles
341. Experimental Validation of Neural-Network-Based Nonlinear Reduced-Order Model for Vertical Sloshing
342. Review on Amphiphilic Ionic Liquids as New Surfactants: From Fundamentals to Applications
343. Apparent slip in colloidal suspensions
344. Implementation mobile app for foreign language acquisition based on structural visual method
345. Failure of the split property in gravity and the information paradox
346. Numerical simulation of methanol crossover in flowing electrolyte-direct methanol fuel cell

347. On a flexible multibody modelling approach using FE-based contact formulation for describing gear transmission error
348. Nonequilibrium in thermodynamic formalism: The second law, gases and information geometry
349. Experiments in Surface Gravity–Capillary Wave Turbulence
350. Improving gas barrier properties of sugarcane‐based LLDPE with cellulose nanocrystals
351. Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs
352. Experimental challenges in ion channel research: Uncovering basic principles of permeation and gating in potassium channels
353. Computationally efficient multiscale modeling for probabilistic analysis of CFRP composites with micro-scale spatial randomness
354. Review of Decision Support Systems and Allocation Models for Integrated Water Resources Management Focusing on Joint Water Quantity-Quality
355. Theoretical analysis of unsteady convective heat transfer from a flat plate with time-varying and spatially-varying temperature distribution
356. 3D numerical modeling of the effect of the drill string vibration cyclic loads on the wellbore natural fracture growth

357. Pressure-independent velocity error estimates for (Navier-) Stokes nonconforming virtual element discretization with divergence free
358. 3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing
359. Influence of pore space heterogeneity on mineral dissolution and permeability evolution investigated using lattice Boltzmann method
360. Direct Pore-Scale Simulations of Fully Periodic Unit Cells of Different Regular Lattices
361. Oxidation difference of microstructural bands in additive manufactured titanium alloy
362. The abrupt degradation of LiFePO4/graphite battery induced by electrode inhomogeneity
363. Chatter suppression in the milling process of the weakly-rigid workpiece through a moving fixture
364. A Novel Gelcast SiO2-Si3N4-BN Ceramic Composites for Radome Applications
365. Entropy generation minimization analysis of two immiscible fluids
366. A surrogate-based optimal likelihood function for the Bayesian calibration of catalytic recombination in atmospheric entry protection materials

367. An Arbitrary High Order Well-Balanced ADER-DG Numerical Scheme for the Multilayer Shallow-Water Model with Variable Density
368. Traveling wave vibration of graphene platelet reinforced porous joined conical-cylindrical shells in a spinning motion
369. Type reproduction number for epidemic models on heterogeneous networks
370. Postponing production exponentially enhances the molecular memory of a stochastic switch
371. Controllable perovskite crystallization via potassium pretreatment toward high-performance solar cells
372. Atmospheric propagation of space-fractional Gaussian-beam waves in a FSO communication system
373. Oscillation mitigation of hyperbolicity-preserving intrusive uncertainty quantification methods for systems of conservation laws
374. Comparison of interface capturing methods for the simulation of two-phase flow in a unified low-Mach framework
375. Integrated framework for SOH estimation of lithium-ion batteries using multiphysics features
376. Holistic Architecture

377. Green-chemical-jump-thickening polishing for silicon carbide
378. Filler‐size‐dependent dynamic mechanical properties of polyethylene glycol/zircon composites
379. Simulation of deformation and decomposition of droplets exposed to electro-hydrodynamic flow in a porous media by lattice Boltzmann method
380. Understanding components of mobility during the COVID-19 pandemic
381. Numerical simulation of molten pool formation during laser transmission welding between PET and SUS304
382. Wine Analytics: Futures or Bottles?
383. Modelling of Ultrasonic Wave Propagation Through the Border of Two Mediums
384. Symptoms of architecture erosion in code reviews: A study of two OpenStack projects
385. A peridynamic model for crevice corrosion damage
386. Effects of gradient porous metal foam on the melting performance and energy storage of composite phase change materials subjected to an internal heater: A …

387. Comparative and sensitive analysis on the filling, operating and performance patterns between the solar gravity heat pipe and the traditional gravity heat pipe
388. Numerical analysis of the effect of trapezoidal baffles inside fuel and air channels on the performance of a planar-type Solid Oxide Fuel Cell
389. Investigation on the aggregation structure of nanoparticle on the thermal conductivity of nanofluids by molecular dynamic simulations
390. A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects
391. Input addition and deletion in reinforcement: towards protean learning
392. Early Wear Fault Dynamics Analysis Method of Gear Coupled Rotor System Based on Dynamic Fractal Backlash
393. A predictive model for next cycle start date that accounts for adherence in menstrual self-tracking
394. The mechanism of gas-water extraction in micro-and nanoscale pores in shale gas reservoirs: Based on gas-water interactions
395. A review on heavy metal ions adsorption from water by layered double hydroxide and its composites
396. Collective minds: social network topology shapes collective cognition

397. Composite emulsifying behavior of egg white protein and rhamnolipid: Properties of the constructed high internal phase emulsions
398. Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending
399. Development of novel biocomposites based on the clean production of microbial cellulose from dairy waste (sour whey)
400. An Exhaustive Exploration of Electromagnetism for Underwater Wireless Sensor Networks
401. Characteristics of the multiphase flow field with super-cavitation induced by successively fired projectiles under-water and cross-medium
402. Electrospun Poly (ω-pentadecalactone-co-ε-caprolactone)/Gelatin/Chitosan Ternary Nanofibers with Antibacterial Activity for Treatment of Skin Infections
403. Computational Mechanics of Fluid-Structure Interaction
404. A friction model of fractal rough surfaces accounting for size dependence at nanoscale
405. Green synthesis of poly(o‐phenylenediamine) polymer film on stainless steel as a corrosion protection layer
406. Pressure infiltration of molten aluminum for densification of environmental barrier coatings

407. Breakup model of oscillating drops in turbulent flow field
408. Algorithms for activity correction models for geochemical speciation and reactive transport modeling
409. Co-evolution of Opinion and Social Tie Dynamics Towards Structural Balance∗
410. Role of near-wall dynamics in roughness aided turbulent Rayleigh-Bénard convection
411. Experimental and computational investigation of flow boiling in microgravity
412. Melting and energy storage characteristics of macro-encapsulated PCM-metal foam system
413. Magnetic field-induced control of a compound ferrofluid droplet deformation and breakup in shear flow using a hybrid lattice Boltzmann-finite difference method
414. The philosophy of social ecology: Essays on dialectical naturalism
415. Separately global solutions to rate-independent processes in large-strain inelasticity
416. Study of multilayered composites through periodic homogenization and Mori–Tanaka methods

417. Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review
418. Microstructure evolution and fracture mechanism of a TiAl–Nb alloy during high-temperature tensile testing
419. Strain partitioning and damage initiation in a continuously cooled carbide free bainitic steel
420. A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness
421. Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution
422. Numerical investigation of thermomechanical response of multiscale porous ultra-High temperature ceramics
423. Computational fluid dynamics (CFD), artificial neural network (ANN) and genetic algorithm (GA) as a hybrid method for the analysis and optimization of micro …
424. Interference effect on tsunami generation by segmented seafloor deformations
425. Design and dynamic performance of a concentrated photovoltaic system with vapor chambers cooling
426. Generation and dynamics of soliton and soliton molecules from a VSe2/GO-based fiber laser

427. Effect of Cassie-Baxter versus Wenzel states on ice adhesion: A fracture toughness approach
428. Fuzzy inference system application for oil-water flow patterns identification
429. Architectural characteristics of different configurations based on new geometric determinations for the conoid
430. Effect of pipeline surface roughness on peak impact forces caused by hydrodynamic submarine mudflow
431. Systems Biology
432. A review of behavioral methods for the evaluation of cognitive performance in animal models: Current techniques and links to human cognition
433. A solution method for free vibration of intact and cracked polygonal thin plates using the Ritz method and Jacobi polynomials
434. Local asymptotic stability of a system of integro-differential equations describing clonal evolution of a self-renewing cell population under mutation
435. Parametric study of bow slamming for a KRISO container ship
436. QCD factorization and quantum mechanics

437. Numerical simulation for hydrocarbon production analysis considering Pre-Darcy flow in fractured porous media
438. A Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador
439. Dripping instability of a two-dimensional liquid film under an inclined plate
440. Bimetallic [email protected] Ti3C2Tx MXene derived composites for broadband microwave absorption
441. Investigations into the drying kinetics of biomass in a fluidized bed dryer using electrostatic sensing and digital imaging techniques
442. Machine-learning-driven on-demand design of phononic beams
443. Modelling stress-induced permeability alterations in sandstones using CT scan-based representations of the pore space morphology
444. Energy minimizers for an asymptotic MEMS model with heterogeneous dielectric properties
445. Experimental and numerical studies on non-equilibrium gaseous solvent dissolution in heavy oil: A continuum-scale approach based on bubble-scale dissolution …
446. A specialized review on outlook of future Cyber-Physical Power System (CPPS) testbeds for securing electric power grid

447. Optimization of physico-chemical and membrane filtration processes to remove high molecular weight polymers from produced water in enhanced oil recovery …
448. Magnetoresponsive biocomposite hydrogels comprising gelatin and valine based magnetic ionic liquid surfactant as controlled release nanocarrier for drug …
449. Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities
450. New poly (lactic acid) composites produced from coffee beverage wastes
451. Characterizing alternating bubbles emerging from two interacting vertical gas jets in a liquid
452. Electrical properties of ZnO films implanted with rare earth and their relationship with structural and optical parameters
453. Cooling effect of droplet impacting on heated solid surface
454. A review on the transmission of COVID-19 based on cough/sneeze/breath flows
455. Multi-Hit Impact Resistance of Masonry Walls Under Large Mass
456. Nucleation and growth in solution synthesis of nanostructures–From fundamentals to advanced applications

457. A numerical study of the effects of cathode geometry on tungsten inert gas type electric arcs
458. Performance Analysis of a Neuro-Fuzzy Algorithm in Human-Centered and Non-invasive BCI
459. TINYV3RSE: The DART Vision-Based Navigation Test-bench
460. The case for a common software library and a set of enumerated benchmark problems in computer-aided molecular design
461. Nonlinear Photonics
462. Modelling density of pure and binary mixtures of normal alkanes: Comparison of hybrid soft computing techniques, gene expression programming, and equations of …
463. Modeling SARS-CoV-2: mitigation interventions and increased mobility events
464. Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
465. Properties of Turbulence
466. Handling Neumann and Robin boundary conditions in a fictitious domain volume penalization framework

467. CFD-PBE coupled model for size-driven segregation in polydisperse granular flows
468. Effect of Self-Induced Body Vibrations on Thrust Generation in Bio-inspired Flying Robots
469. Cómo coadyuvan los modelos matemáticos a entender y combatir a la COVID-19
470. Control of transients in drinking water networks
471. Constitutional Provision in Protecting and Managing Indigenous Knowledge Systems: A Case From Rakhain Community in Bangladesh
472. A survey on Hilbert-Huang transform: Evolution, challenges and solutions
473. Modelling Thermal Conduction in Polydispersed and Sintered Nanoparticle Aggregates
474. Robust analysis of phylogenetic tree space
475. A hele-shaw limit without monotonicity
476. Loop-free tensor networks for high-energy physics

477. Systems analysis of the mechanisms governing the cardiovascular response to changes in posture and in peripheral demand during exercise
478. Wall-modeled large eddy simulations of a turbulent boundary layer over the Boeing speed bump at ReL = 2 million
479. Working Condition Monitoring and Virtual Simulation Method
480. Detailed DFT/MD simulation, surface analysis and electrochemical computer explorations of aldehyde derivatives for mild steel in 1.0 M HCl
481. Nonlinear size-dependent bending and forced vibration of internal flow-inducing pre-and post-buckled FG nanotubes
482. A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly (lactic acid) and poly (lactic acid) hybrid composites
483. Enhancing CO 2 photoreduction over ZIF-based reticular materials by morphology control of Au plasmonic nanoparticles
484. Electrospun polystyrene/graphene oxide fibers applied to the remediation of dye wastewater
485. Bone Ingrowth Around an Uncemented Femoral Implant Using Mechanoregulatory Algorithm: A Multiscale Finite Element Analysis
486. The influence of inflow swirls on phases separation in a Venturi tube

487. Permeability Decline by Clay Fines Migration around a Low‐Salinity Fluid Injection Well
488. Modeling of gas viscosity at high pressure-high temperature conditions: Integrating radial basis function neural network with evolutionary algorithms
489. A parallel cell-centered adaptive level set framework for efficient simulation of two-phase flows with subcycling and non-subcycling
490. Formation process of zirconia nanotubes and porous structures and model of oxygen bubble growth
491. A computational framework for rheologically complex thermo-visco-elastic materials
492. Unequal impact and spatial aggregation distort covid-19 growth rates
493. Drop Impact Dynamics: Impact Force and Stress Distributions
494. Indexed bibliography of genetic algorithms in physical sciences
495. Fully implicit two-phase VT-flash compositional flow simulation enhanced by multilayer nonlinear elimination

interfacial phenomena Topics of Presentations

Prof.Fazal Rehman Shamil (Available for Professional Discussions)
1. Message on Facebook page for discussions,
2. Video lectures on Youtube
3. Email is only for Advertisement/business enquiries.