Fluidic shaping Research Topics

Research Area/ Research Interest: Fluidic shaping

Research Paper Topics for Masters and Ph.D. Thesis and publication

  1. DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
  2. Fluidic virtual aerosurfaces for flow control applications
  3. Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
  4.  Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
  5. 3D particle tracking in a micro-channel by means of helical wavefront shaping
  6. Experimental feasibility study of an analog electrical-to-fluidic transducer
  7. The photonic integration of non-solid media using optofluidics
  8.  Separation control with fluidic oscillators in water
  9. Adjustable compliance soft sensor via an elastically inflatable fluidic dome
  10. Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
  11. DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
  12. Fluidic virtual aerosurfaces for flow control applications
  13. Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
  14.  Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
  15. 3D particle tracking in a micro-channel by means of helical wavefront shaping
  16. Experimental feasibility study of an analog electrical-to-fluidic transducer
  17. The photonic integration of non-solid media using optofluidics
  18.  Separation control with fluidic oscillators in water
  19. Adjustable compliance soft sensor via an elastically inflatable fluidic dome
  20. Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
  21. DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
  22. Fluidic virtual aerosurfaces for flow control applications
  23. Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
  24.  Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
  25. 3D particle tracking in a micro-channel by means of helical wavefront shaping
  26. Experimental feasibility study of an analog electrical-to-fluidic transducer
  27. The photonic integration of non-solid media using optofluidics
  28.  Separation control with fluidic oscillators in water
  29. Adjustable compliance soft sensor via an elastically inflatable fluidic dome
  30. Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
  31. A review of acoustic compressors and pumps from fluidics perspective
  32.  Disordered protein-graphene oxide co-assembly and supramolecular biofabrication of functional fluidic devices
  33. Stabilization of the fluidic pinball with gradient-enriched machine learning control
  34.  Comparison of different fluidic muscles
  35.  A Modular Design Approach For Programmable Cyber-Fluidic Systems
  36.  Nano-inspired smart interfaces: fluidic interactivity and its impact on heat transfer
  37.  Adaptive optical beam steering and tuning system based on electrowetting driven fluidic rotor
  38. Electrolyte-assisted electrospinning for a self-assembled, free-standing nanofiber membrane on a curved surface
  39.  FLUIDICS: WHAT IT IS, WHERE IT IS HEADING-AND HOW IT WILL CHANGE THE WORLD WE LINE IN
  40. Mapping out Min protein patterns in fully confined fluidic chambers
  41. Growing and shaping metal–organic framework single crystals at the millimeter scale
  42.  Multi-functional, optofluidic, in-plane, bi-concave lens: tuning light beam from focused to divergent
  43. Segmented flow is controlling growth of catalytic biofilms in continuous multiphase microreactors
  44. Shape-reprogrammable polymers: Encoding, erasing, and re-encoding
  45. Thermo-Fluidic Characterizations of Multi-Port Compact Thermal Model of Ball-Grid-Array Electronic Package
  46. Flexible liquid metal alloy (EGaIn) microstrip patch antenna
  47. Study of odor blender using solenoid valves controlled by delta–sigma modulation method for odor recorder
  48. Effect of flow and peristaltic mixing on bacterial growth in a gut-like channel
  49.  Miniaturized flow cytometer with 3D hydrodynamic particle focusing and integrated optical elements applying silicon photodiodes
  50. A parametric level-set approach for topology optimization of flow domains
  51. Flueric operational amplifier survey
  52. Adaptive energy shaping control of a class of nonlinear soft continuum manipulators
  53.  A zeolite absorbent/nano-fluidics protection-based blast-and ballistic-impact-mitigation system
  54. Contactless electrostatic shaping of a capillary jet for drop-on-demand purposes
  55.  Comparison of different neural networks models for identification of manipulator arm driven by fluidic muscles
  56. A 3D-printed flow distributor with uniform flow rate control for multi-stacked microfluidic systems
  57. Numerical computing paradigms for the dynamics of squeezing rheology of third grade fluid
  58. Modeling and Passive Control of Channel Filling for Micro Fluidic Networks with Thousands of Components
  59. Fluidic pressure ratio sensing for jet engine controls
  60. Fluorescence lifetime excitation cytometry by kinetic dithering
  61.  Solid-State Physics, Fluidics, and Analytical Techniques in Micro-and Nanotechnology
  62. Actuating fluid–fluid interfaces for the reconfiguration of light
  63. Operational Control of Mixing Enhancement and Far-Field Jet Noise Suppression Using Downstream Fluidic Injection
  64. Three-Axis Fluidic Stability Augmentation System Flight Test Report
  65. Dielectrophoretic cell trapping for improved surface plasmon resonance imaging sensing
  66. Mitigation of blast and impact loading via the use of a zeolite-absorbent/nano-fluidics protection system
  67. Power fluidics and the environment
  68.  Characterization and Modeling of silicon migration by hydrogen annealing
  69.  Subsonic Jet Noise Reduction via Downstream Fluidic Injection
  70. Apex structures enhance water drainage on leaves
  71.  STATIC CHARACTERISTICS OF FLUDIC MUSCLES
  72. Scheduling of microfluidic operations for reconfigurable two-dimensional electrowetting arrays
  73. Workshop on assembling of superstructures in soft matter
  74.  Engaging nanotechnology: ethnography of lab-on-a-chip technology in small-scale fluidics research
  75. Topology optimization for thermal transport
  76. Teaching pattern diversification for optics course: motivate interest, open minds and apply flexibly
  77. Mechanically programmed Fluidic Microactuators for soft robotics applications
  78.  Digital acoustofluidics enables contactless and programmable liquid handling
  79. A Parameter-Space design methodology for casual creators
  80. Dynamic microscale flow patterning using electrical modulation of zeta potential
  81.  Mapping out Min protein patterns in fully con ned fluidic
  82. High precision control of integrated microfluidics for nanomanufacturing and fluidic sampling
  83. Safe pumping of hazardous liquids—A survey of no-moving-part pump principles
  84. Evolution of the hydrofluidic liquid SAS
  85. Random distributed feedback fibre lasers
  86. 3D structuration of LTCC and related technologies for thermal management and microfluidic structures
  87. Detecting Swelling States of Red Blood Cells by “Cell–Fluid Coupling Spectroscopy”
  88. Ultrafast laser inscription: perspectives on future integrated applications
  89.  Transport in two-dimensional paper networks
  90. Raising the profile of mathematics
  91. Optofluidic devices and applications in photonics, sensing and imaging
  92.  Speakers & Abstracts of Second UBM South Regional Conference
  93. Room-temperature fabrication of anodic tantalum pentoxide for low-voltage electrowetting on dielectric (EWOD)
  94. Fabrication methods and performance of low-permeability microfluidic components for a miniaturized wearable drug delivery system
  95. Exploring the relationship between reflexivity and reflective practice through lesson study within initial teacher education
  96.  Visualization of surface acoustic waves in thin liquid films
  97. Application of a Parametric Level-Set Approach to Topology Optimization of Fluids with the Navier–Stokes and Lattice Boltzmann Equations
  98. Nonlinear generation and manipulation of Airy beams
  99.  Visualization study of hybrid synthetic jets
  100. Numerical Investigation of Active Flow Control for Front-Loaded Low-Pressure Turbine Cascade
  101. High Frequency/Low Frequency Flow Control Applied To Turbulent External Aerodynamics
  102.  Dynamic Beam Shaping Using Electrowetting Effects
  103. Biodiversity and species competition regulate the resilience of microbial biofilm community
  104.  MEMS and microsystems: design, manufacture, and nanoscale engineering
  105. Application of Design of the Experiment in Preliminary Investigations on the end Milling of Low Temperature Co-fired Ceramics
  106. On the design of microfluidic implant coil for flexible telemetry system
  107. 3D Printing in analytical sample preparation
  108. A general framework for quantitatively assessing ecological stochasticity
  109. Digital in-line holographic microscopy with various wavelengths and point sources applied to static and fluidic specimens
  110.  Continuum modeling of non-conservative fluid membrane for simulating long-term cell dynamics
  111. Recent results from NASA’s morphing project
  112. Positive position feedback control for large space structures
  113. Multi-layer, pseudo 3d thermal topology optimization of heat sinks
  114.  Dynamic in-situ sensing of fluid-dispersed 2D materials integrated on microfluidic Si chip
  115.  Tipping solutions: emerging 3D nano-fabrication/-imaging technologies
  116. Delay of airfoil stall by periodic excitation
  117.  Polygonal non-wetting droplets on microtextured surfaces
  118. A brief history of liquid computers
  119. Liquid metal logic for soft robotics
  120.  Optimal design for non-Newtonian flows using a topology optimization approach
  121. Fluid deformable surfaces
  122. Numerical simulations of bioextruded polymer scaffolds for tissue engineering applications
  123. Image-based sorting and negative dielectrophoresis for high purity cell and particle separation
  124. Laser-induced thermocapillary convection for mesoscale manipulation
  125. An electrochemically actuated micro dosing system with improved dosing control
  126.  Engineering phase and polarization singularity sheets
  127.  A microfluidic interfacing connection system ($$\upmu $$ μ FICS) combining simplicity, minimalism, robustness, high-pressure, reusability and low cost
  128. Re-engineering engineering education: A comparison of student motivation, ability development, and career paths in traditional and cross-disciplinary engineering …
  129.  A new look at guided-wave optical sensing
  130.  MECHANICAL ENGINEERING BRANCH
  131. Fluid deformable surfaces
  132. Numerical simulations of bioextruded polymer scaffolds for tissue engineering applications
  133. Image-based sorting and negative dielectrophoresis for high purity cell and particle separation
  134. Laser-induced thermocapillary convection for mesoscale manipulation
  135. An electrochemically actuated micro dosing system with improved dosing control
  136.  Engineering phase and polarization singularity sheets
  137.  A microfluidic interfacing connection system ($$\upmu $$ μ FICS) combining simplicity, minimalism, robustness, high-pressure, reusability and low cost
  138. Re-engineering engineering education: A comparison of student motivation, ability development, and career paths in traditional and cross-disciplinary engineering …
  139.  A new look at guided-wave optical sensing
  140.  MECHANICAL ENGINEERING BRANCH
  141. Paper-based microfluidics for electrochemical applications
  142. Spatial filters on demand based on aperiodic photonic crystals
  143. Microfluidic strategies for design and assembly of microfibers and nanofibers with tissue engineering and regenerative medicine applications
  144.  Superior thermoelectric performance of thin film Heusler alloys
  145. Reservoir end wall effects on bivariate ion and fluid transport in micro/nano nozzles for effective electroosmotic mixing
  146. Aerodynamic flow control over an unconventional airfoil using synthetic jet actuators
  147. Program for an improved hypersonic temperature-sensing probe
  148.  Digital microfluidics: Techniques, their applications and advantages
  149. Use of piezoelectric actuators for airfoil separation control
  150.  OSU Life Sciences Interdisciplinary Graduate Programs Symposium 2019
  151. Topological constraints in a microfluidic platform
  152.  Direct measurements of controlled aerodynamic forces on a wire-suspended axisymmetric body
  153.  Acoustic microfluidics
  154.  Tight focusing properties of spirally polarized LG (1, 1)* beam with High NA Parabolic mirror
  155. Computers, networks and education
  156.  Mesoscopic self-assembly: a shift to complexity
  157. Cryptographic hashing using chaotic hydrodynamics
  158. Rejuvenation of soft material–actuator
  159.  Report of a workshop on science, technology, engineering, and mathematics (STEM) workforce needs for the US Department of Defense and the US defense …
  160. A 3D-printed 3D actuator for miniaturized laser scanning probes
  161.  SESSION I
  162. Controller synthesis free of analytical models: Three term controllers
  163. Flow control of small objects on chip: Manipulating live cells, quantum dots, and nanowires
  164.  A self-oscillating system to measure the conductivity and the permittivity of liquids within a single triangular signal
  165.  Local community assembly mechanisms shape soil bacterial β diversity patterns along a latitudinal gradient
  166. A study of water-based lubricant with a mixture of polyphosphate and nano-TiO2 as additives for hot rolling process
  167.  Recent advancement of flow-induced piezoelectric vibration energy harvesting techniques: principles, structures, and nonlinear designs
  168.  The effect of flow control on the wake dynamics of a rectangular bluff body in ground proximity
  169.  Additive manufacturing of functional microarchitected reactors for energy, environmental, and biological applications
  170.  On factors influencing arc filament plasma actuator performance in control of high speed jets
  171.  Review of soft linear actuator and the design of a dielectric elastomer linear actuator
  172. Design and FEA-based Methodology for a Novel 3 Parallel Soft Muscle Actuator
  173.  Shape Shifting Systems for Reconfigurable Front-end Applications
  174.  Contrast diversity patterns and processes of microbial community assembly in a river-lake continuum across a catchment scale in northwestern China
  175. Iterative Prototyping Methodology for the Development of Innovative and Dependable Complex Embedded Systems Through SPC&KPI Techniques
  176. VFCVD diamond-coated cutting tools for micro-machining titanium alloy Ti6Al4V
  177. New technology for ultrasensitive detection and isolation of rare cells for clinical diagnostics and therapeutics
  178. Biologically inspired optical systems
  179.  IDENTIFICATION, CONTROL DESIGN AND IMPLEMENTARION FOR AN AIR HEATING PLANT
  180. Counting of Escherichia coli by a microflow cytometer based on a photonic–microfluidic integrated device
  181. Electrowetting-Controlled and Electrically-Tunable Bio-Inspired Micro/Nanostructures and Optofluidic Devices
  182.  Characterizing effects of humidity and channel size on imbibition in paper-based microfluidic channels
  183.  Research Article A Self-Oscillating System to Measure the Conductivity and the Permittivity of Liquids within a Single Triangular Signal
  184. Topological microfluidics: present and prospects
  185.  Field generated nematic microflows via backflow mechanism
  186. Micro-electro-mechanical Systems (mems) And Agile Lensing-based Modules For Communications, Sensing And Signal Processing.
  187. Static model of pneumatic flexible rotary joint
  188.  Technical Program
  189.  ENGenious: a publication for alumni and friends of the Division of Engineering and Applied Science of the California Institute of Technology. Issue 6 …
  190. Automated laser guidance of neuronal growth cones using a spatial light modulator
  191. Modular pumps as programmable hydraulic batteries for microfluidic devices
  192. Fluid mixing for low-power ‘digital microfluidics’ using electroactive molecular monolayers
  193.  IDENTIFICATION AND ROBUST CONTROL IMPLEMENTATION FOR AN AIR HEATING PLANT
  194.  A goal-oriented design evaluation framework for decision making under uncertainty
  195. Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part I–Modeling
  196. Fishing with Chips
  197. Chromosome purification by high-speed sorting
  198. Optofluidics
  199.  Numerical investigation of wing morphing capabilities applied to a Horten type swept wing geometry
  200. Integrating Micro And Nanoscale Manufacturing In Engineering Education
  201.  INTEGRATING MICRO-NANO LEVEL INTERDISCIPLINARY MANUFACTURING ENGINEERING EDUCATION FOR MEMS DEVELOPMENT
  202. Ionic-surfactant-mediated electro-dewetting for digital microfluidics
  203. Tandem/Cascade Polymerization
  204. How to Map Phase Diagrams of Polymer Solutions-Microfluidics Marries Laser Light Scattering
  205. 50 Years of Macromolecules: What Have We Learned?
  206. Brush Polymers Precisely Constructed by Combination of Living Anionic Polymerization and Ring-Opening Metathesis Polymerization: Access to Photonic Crystals
  207. Highly Asymmetric Gyroid Structures by Blending of ABC Triblock Terpolymer and AB Diblock Copolymer
  208. Single-pulse femtosecond laser Bessel beams drilling of high-aspect-ratio microholes based on electron dynamics control
  209. Port-Hamiltonian analysis of a novel robotic finger concept for minimal actuation variable impedance grasping
  210. Improving chip-to-chip precision in disposable microchip capillary electrophoresis devices with internal standards
  211. The Fluid Joint: The Soft Spot of Micro-and Nanosystems
  212.  A modular microfluidic system based on a multilayered configuration to generate large-scale perfusable microvascular networks
  213.  KNMF-User Committee
  214.  Computational models of room temperature ionic liquids
  215. Reducing the pressure drag of a D-shaped bluff body using linear feedback control
  216. Design for a natural laminar flow glove for a transport aircraft
  217. From vision to the implementation of the US National Nanotechnology Initiative
  218. A New Approach of Soft Joint Based on a Cable-Driven Parallel Mechanism for Robotic Applications
  219.  High-throughput arrayed comets for Dna Damage and repair
  220. Reduced basis approximation and a-posteriori error estimation for the coupled Stokes-Darcy system
  221. Isolation of L angerhans islets by dielectrophoresis
  222. Iterative Prototyping Methodology for the Development of Innovative and Dependable Complex Embedded Systems Through SPC&KPI Techniques
  223. Flow control via synthetic jet actuation
  224. Bio-imitation of Mexican migration routes to the USA with slime mould on 3D terrains
  225. Actuation systems in plants as prototypes for bioinspired devices
  226. Transfer function models for cylindrical MC channels with diffusion and laminar flow
  227.  Automotive Mechatronics: Operational and Practical Issues: Volume I
  228. Shape-selective assembly of anisotropic, deformable microcomponents using bottom-up micromanufacturing
  229.  2D acoustofluidic patterns in an ultrasonic chamber modulated by phononic crystal structures
  230. Eckhaus instability in the Fourier-domain mode locked fiber laser cavity
  231. Related searches
  232. Pointwise Fabrication and Fluidic Shaping of Carbon Nanotube Field Emitters
  233. Fluidic shaping of optical components
  234.  Thermal modulation of fluidic lenses in microgravity
  235. Fabrication of diffractive optical elements by programmable thermocapillary shaping of thin liquid films
  236. Programmable thermocapillary shaping of thin liquid films
  237.  Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
  238. Adjustable compliance soft sensor via an elastically inflatable fluidic dome
  239.  A Modular Design Approach For Programmable Cyber-Fluidic Systems
  240. Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly
  241. Stabilization of the fluidic pinball with gradient-enriched machine learning control
  242. Characterizing Macrophage Heterogeneity in Tissues Through High-Throughput Transcriptomics Technologies and Algorithms
  243. Digital Innovation Enabled Nanomaterial Manufacturing; Machine Learning Strategies and Green Perspectives
  244.  Characterization of Transcriptional Heterogeneity in Gastrointestinal Stromal Tumor
  245. In search for an alternative to the computer metaphor of the mind and brain
  246. Organisation and dynamics of mitochondria and their RNA.
  247. Cellulose Filaments for Responsive and Functional Materials
  248. A roadmap for transforming research to invent the batteries of the future designed within the European large scale research initiative BATTERY 2030+
  249. Killer cities
  250.  The Transcriptional Biographies of Embryonic Cells
  251.  Enhancing Electromagnetic Performance of Metal Devices: From Nanoscale Materials Studies to Device Optimization and Macroscale Reconfiguration
Prof.Fazal Rehman Shamil (Available for Professional Discussions)
1. Message on Facebook page for discussions,
2. Video lectures on Youtube
3. Email is only for Advertisement/business enquiries.