List of Research Paper ideas of interfacial phenomena in Math for MS and PhD thesis
1. The impact of multiple-component PFAS solutions on fluid-fluid interfacial adsorption and transport of PFOS in unsaturated porous media 2. Investigation of the Effect of 3D Meniscus Geometry on Fluid Dynamics and Crystallization via In Situ Optical Microscopy‐Assisted Mathematical Modeling 3. Physical and Mathematical Modelling of Fluid and Heat Transport Phenomena in Porous Media 4. Acceptance of personalized e-learning systems: a case study of concept-effect relationship approach on science, technology, and mathematics courses 5. Using mathematical modelling to identify data requirements for increased prediction accuracy in radiotherapy 6. A mathematical model for CO2 conversion of CH4-producing biocathodes in microbial electrosynthesis systems 7. Critical Review of Emulsion Stability and Characterization Techniques in Oil Processing 8. Rapid eutectic growth: from rod growth to diffusionless solidification 9. Stress analysis of elastic bi-materials by using the localized method of fundamental solutions 10. Variability of complex oscillatory regimes in the stochastic model of cold-flame combustion of a hydrocarbon mixture 11. Reflection and transmission of waves at the common interface of piezoelectric half-spaces with microstructure 12. A screening model for quantifying PFAS leaching in the vadose zone and mass discharge to groundwater 13. A mathematical modelling of multiphysics-based propagation characteristics of surface wave in piezoelectric-hydrogel layer on an elastic substrate 14. DATA: Diafiltration Apparatus for high-Throughput Analysis 15. Mathematical modeling for bubbling fluidized bed CO-methanation reactor incorporating the effect of circulation and particle flows 16. Effective interface conditions for continuum mechanical models describing the invasion of multiple cell populations through thin membranes 17. Challenges of numerical simulation of dynamic wetting phenomena: a review 18. Mathematical model of two-phase Taylor flow hydrodynamics for four combinations of non-Newtonian and Newtonian fluids in microchannels 19. Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions 20. Coloured-noise-induced transport in a model of the thermochemical reactor 21. A review on mathematical modelling of Direct Internal Reforming-Solid Oxide Fuel Cells 22. Structure diagram and dynamics of formation of hexagonal boron nitride in phase-field crystal model 23. Effect of fluorocarbon surfactants on the adsorption of hydrocarbon surfactants mixture at the water-air interface 24. Optimal convergence analysis of the energy-preserving immersed weak Galerkin method for second-order hyperbolic interface problems in inhomogeneous media 25. Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags 26. Instability of a planar fluid interface under a tangential electric field in a stagnation point flow 27. Boiling crisis due to bubble interactions 28. Hydrothermal variations of radiative nanofluid flow by the influence of nanoparticles diameter and nanolayer 29. Mathematical modeling of physical processes in metals and ordered alloys 30. Optimization of battery charging strategy based on nonlinear model predictive control 31. Predicting concurrent structural mechanical mechanisms during microstructure evolution 32. Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence 33. Characteristics of thermophoresis and Brownian motion on radiative reactive micropolar fluid flow towards continuously moving flat plate: HAM solution 34. A theoretical and numerical analysis of a Dirichlet-Neumann domain decomposition method for diffusion problems in heterogeneous media 35. Continuum and Molecular Dynamics Studies of the Hydrodynamics of Colloids Straddling a Fluid Interface 36. Modelling of defects in aluminium cast products 37. Modelling of hemodynamics in bifurcation lesions of coronary arteries before and after myocardial revascularization 38. Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys 39. Role of zirconia phase transformation, interface processes, and Ta2O5 doping on the blistering phenomenon of molten glass in contact with zirconia-based … 40. Simulation of electric field control effects on the ion transport in proton exchange membranes for application in fuel cells and electrolysers 41. Calcium Signaling in the Photodamaged Skin: In Vivo Experiments and Mathematical Modeling 42. On ultrasound propagation in composite laminates: advances in numerical simulation 43. ALPACA-a level-set based sharp-interface multiresolution solver for conservation laws 44. Investigation of a sintering phenomenon through master sintering curve based on python software 45. Improving single-lap joint load bearing by bioinspired interlocking patterns on substrates 46. A phase field model for hydrogen-assisted fatigue 47. Depth-averaged coupling of submerged granular deformation with fluid flow: An augmented HLL scheme 48. Investigating the Unsteady Shock Bubble Multiphase Interactions 49. Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains 50. Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification 51. DEM-BEM coupling in time domain for one-dimensional wave propagation 52. Atomic-scale growth, imaging, spectroscopy, and electronic transport properties of metal-oxide films and interfaces 53. Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach 54. Thermal flow characteristics and the evolution of laser absorption in laser powder bed fusion of Cu-Cr-Zr alloy 55. Analysis of Damage and Failure mechanism under a lubricated slipper/swashplate interface in Axial Piston Machines 56. Thermoelectric Generators: A comprehensive review of characteristics and applications 57. Experimental study of the shear strength of a snow-mortar interface 58. Assisting/opposing/forced convection flow on entropy‐optimized MHD nanofluids with variable viscosity: Interfacial layer and shape effects 59. Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting 60. Modelling the adsorption of proteins to nanoparticles at the solid-liquid interface 61. Beam wobbling effects on laser transmission welding of dissimilar polymers: Experiments, modeling, and process optimization 62. Induced side-branching in smooth and faceted dendrites: theory and phase-field simulations 63. Simulation of Performance and Emissions Related Parameters in a Thermal Engine Using a Deep Learning Approach 64. Human cumulative culture and the exploitation of natural phenomena 65. Amorphization and nanocrystal formation in a Pd–Ni–Cu–P alloy after cooling under different conditions 66. Fuzzy Dynamical System in Alcohol-Related Health Risk Behaviors and Beliefs 67. Modelling of liquid film migration in Al-Cu alloys 68. A dynamic model of CO2 diffusion coefficient in shale based on the whole process fitting 69. Modeling polymer-metal frictional interface using multi-asperity contact theory 70. Does Machine Learning Offer Added Value vis-à-vis Traditional Statistics? An Exploratory Study on Retirement Decisions Using Data from the Survey of Health … 71. Simulation of Fracture Formation in Solid Oxide Fuel Cell Anode Using Peridynamic Modeling Method 72. Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation 73. Leveraging Prediction and Reflection in a Computational Setting to Enrich Undergraduate Students’ Combinatorial Thinking 74. Secondary and Tertiary Oil Recovery Processes 75. Investigation of the blast pressure following laser ablation at a solid–fluid interface using shock waves dynamics in air and in water 76. Investigation of the low-frequency stray current induced corrosion on reinforced concrete infrastructure in high-speed rail transit power supply system 77. Modeling nonlinear bending of axisymmetric circular nano-plates in framework of Ru’s surface stress elasticity theory 78. Modeling of the sedimentation process of monodisperse suspension 79. On Seawater Conductivity Control by Acoustic Radiation 80. Robust state-feedback stabilization of an underactuated network of interconnected n+ m hyperbolic PDE systems 81. Role of liquid and solid particles in solid-liquid mixed fluxes on sulfur removal from molten iron under centrifugal stirring by an impeller 82. Thin-film Rayleigh–Taylor instability in the presence of a deep periodic corrugated wall 83. Optothermal grid activation of microflow with magnetic nanoparticle thermophoresis for microfluidics 84. Modeling and simulation for estimating thin film lubrication effects on flow of Jeffrey liquid by a spiraling disk 85. Digitally-transformed early-warning protocol for membrane cleaning based on a fouling-cumulative sum chart: Application to a full-scale MBR plant 86. Analysis of fabrication and crack-induced porosity migration in mixed oxide fuels for sodium fast reactors by the finite element method 87. Modeling of micro-channel critical flow with inlet sub-cooling: Metastable liquid and nucleation 88. Structure–properties‐performance relationships in complex epoxy nanocomposites: A complete picture applying chemorheological and thermo‐mechanical kinetic … 89. Thermo-mechanical coupling shock waves propagation with phase transition under impact loading 90. Boundary integral formulations for acoustic modelling of high-contrast media 91. Design and Simulation of MEMS Based Capacitive Accelerometer 92. A non-standard numerical method for finite element modelling of tensile cracks in quasi-brittle material 93. The applicability of shungite as an electrically conductive additive in cement composites 94. A federated learning method for network intrusion detection 95. A hybrid partitioned deep learning methodology for moving interface and fluid–structure interaction 96. On the crystal growth kinetics of ultra‐toughened biobased polyamide 410: New insights on dynamic crystallization 97. Riemann solvers of a conserved high-order traffic flow model with discontinuous fluxes 98. Toward a Mechanistic Account of Extended Cognition 99. On the Development of Icephobic Surfaces: Bridging Experiments and Simulations 100. Competing spreading dynamics in simplicial complex 101. Local thermal non-equilibrium (LTNE) effects on thermal-free convection in a nanofluid-saturated horizontal elliptical non-Darcian porous annulus 102. Feature-based modeling for industrial processes in the context of digital twins: A case study of HVOF process 103. Further enhancement of the particle shifting technique: Towards better volume conservation and particle distribution in SPH simulations of violent free-surface flows 104. Epoxy-based/BaTiO3 nanodielectrics: Relaxation dynamics, charge transport and energy storage 105. Numerical assessment of thermal characteristics of metal foams of orderly varied pore density and porosity under different convection regimes 106. Modeling the recent outbreak of COVID-19 in India and its control strategies 107. Computation of unsteady generalized Couette flow and heat transfer in immiscible dusty and non‐dusty fluids with viscous heating and wall suction effects using a … 108. Analysis of adverse influence of metal vapor to arc movement between electrodes with external magnetic field applied by numerical simulation 109. Towards quantum simulations in particle physics and beyond on noisy intermediate-scale quantum devices 110. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites 111. A critical review on the electrosorption of organic compounds in aqueous effluent–Influencing factors and engineering considerations 112. Dip coating of cylinders with Newtonian fluids 113. Sub-Sampled Imaging for STEM: Maximising Image Speed, Resolution and Precision Through Reconstruction Parameter Refinement 114. Pore-scale study of the multiphase methane hydrate dissociation dynamics and mechanisms in the sediment 115. On geometrical properties of electromagnetic transmission eigenfunctions and artificial mirage 116. Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction 117. Impact of Respiratory Fluctuation on Hemodynamics in Human Cardiovascular System: A 0-1D Multiscale Model 118. Density-based turbulence damping at large-scale interface for Reynolds-averaged two-fluid models 119. Intelligent Design Optimization System for Additively Manufactured Flow Channels Based on Fluid–Structure Interaction 120. Induced magnetic field and viscous dissipation on flows of two immiscible fluids in a rectangular channel 121. A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer 122. Analysis of entropy generation in AA7072-methanol and AA7072+ AA7075-methanol flow near a parabolic surface 123. Multiscale topology optimization for graded cellular structures based on level set surface cutting 124. Marangoni convection flow of γ–Al2O3 nanofluids past a porous stretching surface with thermal radiation effect in the presence of an inclined magnetic field 125. Alkaline flooding 126. Nonmonotonic Pair Potentials in the Interaction of Like-Charged Objects in Solution 127. A Seamless, Extended DG Approach for Advection–Diffusion Problems on Unbounded Domains 128. 多模态瑞利-泰勒不稳定性的离散玻尔兹曼数值研究 129. Study of Parameters Influencing on the Performance of SiNW ISFET Sensor 130. Numerical analysis and safety design of grounding systems in underground compact substations 131. Pathway modeling and simulation analysis 132. A study of the generalized nonlinear advection-diffusion equation arising in engineering sciences 133. Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel 134. Sources of funding CSF 135. Dynamic magnetic birefringence in a viscoelastic ferrocolloid 136. Accelerated weathering effects on mechanical, thermal and viscoelastic properties of kenaf/pineapple biocomposite laminates for load bearing structural applications 137. Indexical AI 138. A numerical integration strategy of meshless numerical manifold method based on physical cover and applications to linear elastic fractures 139. Steepened wave in two-phase Chaplygin flows comprising a source term 140. A two-phase three-field modeling framework for heat pipe application in nuclear reactors 141. Effect of surfactant addition and viscosity of the continuous phase on flow fields and kinetics of drop formation in a flow-focusing microfluidic device 142. Update on emerging technologies including novel applications: radio frequency 143. Fundamental fluid dynamics challenges in inkjet printing 144. A stochastic model for nanoparticle deposits growth 145. Finite state graphon games with applications to epidemics 146. An analytical solution on spontaneous imbibition coupled with fractal roughness, slippage and gravity effects in low permeability reservoir 147. Diffusion, aggregation and electrokinetics 148. Influence of asphaltenes and resins on water/model oil interfacial tension and emulsion behavior: Comparison of extracted fractions from crude oils with different … 149. Volume of fluid-based numerical analysis of a pump-driven phase change heat transport device 150. Resolvent Estimates for a Compressible Fluid Model of Korteweg Type and Their Application 151. A comprehensive study of droplet formation in a capillary embedded step T-junction: From squeezing to jetting 152. Generalized thermal investigation of unsteady MHD flow of Oldroyd-B fluid with slip effects and Newtonian heating; a Caputo-Fabrizio fractional model 153. Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures 154. Effect of ionic liquids on thermomechanical properties of polyetheretherketone‐multiwalled carbon nanotubes nanocomposites 155. A melamine‐based covalent organic framework nanomaterial as a nanofiller in polyethersulfone mixed matrix membranes to improve separation and antifouling … 156. Data-Driven optimization of blast furnace iron making process using evolutionary deep learning 157. Provably non-stiff implementation of weak coupling conditions for hyperbolic problems 158. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites 159. An alternating-direction hybrid implicit-explicit finite-difference time-domain method for the Schrödinger equation 160. Co-encapsulation of curcumin and β-carotene in Pickering emulsions stabilized by complex nanoparticles: Effects of microfluidization and thermal treatment 161. Modified nanocrystalline cellulose partially replaced carbon black to reinforce natural rubber composites 162. Modeling of cooling and heat conduction in permanent mold casting process 163. Smooth finite element construction and correction method based on hybrid FE-SEA model 164. Implications of capillarity-wettability interaction on geometrically mediated droplet splitting mechanism 165. Wave power extraction for an oscillating water column device consisting of a surging front and back lip-wall: An analytical study 166. Impacts of wave-induced ocean surface turbulent kinetic energy flux on typhoon characteristics 167. An iterative analytical model for aging analysis of Li-ion cells 168. Effect of interfacial damping on high-frequency surface wave resonance on a nanostrip-bonded substrate 169. Experimental characterisation of sloshing tank dissipative behaviour in vertical harmonic excitation 170. Modelling of environmental ageing of polymers and polymer composites—modular and multiscale methods 171. On the selective laser melting based additive manufacturing of AlSi10Mg: The process parameter investigation through multiphysics simulation and experimental … 172. Isogeometric multilevel quadrature for forward and inverse random acoustic scattering 173. Using incomplete complex modes for model updating of monopiled offshore wind turbines 174. How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes? 175. Open capillary siphons 176. Modeling and simulation of a multi-bed industrial reactor for renewable diesel hydroprocessing 177. Reflectance Spectra Analysis Algorithms for the Characterization of Deposits and Condensed Traces on Surfaces 178. Numerical simulation of fuel dribbling and nozzle wall wetting 179. Dynamical analysis of two-pathogen coinfection in influenza and other respiratory diseases 180. Collaborative Decision-Making Centres for Sustainable Energy 181. Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology 182. A collaborative design platform for new alloy material development 183. Surface engineering and on-site charge neutralization for the regulation of contact electrification 184. Synthesis of PVDF‐B4C mixed matrix membrane for ultrafiltration of protein and photocatalytic dye removal 185. Nonconforming time discretization based on Robin transmission conditions for the Stokes–Darcy system 186. Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology 187. Atomistic elucidation of mechanical properties and fracture phenomenon of defective indium selenide monolayer 188. Insights into fracture mechanisms and strength behaviors of two-dimensional carbon fiber reinforced silicon carbide composites at elevated temperatures 189. Longitudinal remagnetization of uniaxial antiferromagnetic nanoparticles: the role of spontaneous magnetic moment 190. Progress and challenges on the thermal management of electrochemical energy conversion and storage technologies: Fuel cells, electrolysers, and … 191. Solution landscape of the Onsager model identifies non-axisymmetric critical points 192. Quantification of gas exsolution and preferential diffusion for alkane solvent (s)–CO2–heavy oil systems under nonequilibrium conditions 193. Fire whirls: a combustion science perspective 194. Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges 195. Effects of Textured Surfaces on Skin Friction 196. Dynamics of evaporating respiratory droplets in the vicinity of vortex dipoles 197. Direct observations of ultrasonically generated hot spots in polymer composite energetic materials 198. Surfactants and nanoscience 199. Friction-induced vibration of a slider-on-rotating-disc system considering uniform and non-uniform friction characteristics with bi-stability 200. Unsteady mixed convection flow of magneto-Williamson nanofluid due to stretched cylinder with significant non-uniform heat source/sink features 201. Interface sintering engineered superhydrophobic and durable nanofiber composite for high-performance electromagnetic interference shielding 202. Carbon dioxide diffusions in methane-dissolved pore fluids: implications for geological carbon storage and utilization in tight formations 203. Fractal dimension of India using multicore parallel processing 204. Stability-based optimization of ACRT for the growth of CZT by the traveling heater method 205. Smart healthcare security device on medical IoT using raspberry pi 206. Tribology—A Tool for Mechanical and Industrial Engineering 207. A Second Order Energy Dissipative Scheme for Time Fractional L 2 Gradient Flows using SAV Approach 208. Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency 209. Effects of low frequency multi-mode ultrasound and it’s washing solution’s interface properties on freshly cut cauliflower 210. An approach to simulate gas-solid flow systems with process controllers 211. Nonreciprocal and non-Hermitian material response inspired by semiconductor transistors 212. Theory and applications of new fractional-order chaotic system under Caputo operator 213. Numerical analysis on stability of functionally graded graphene platelets (GPLs) reinforced dielectric composite plate 214. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components 215. Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy 216. Unsteady aerodynamic forces on a tapered prism during the combined vibration of VIV and galloping 217. Bounds on quantum information storage and retrieval 218. Assembly techniques for proton exchange membrane fuel cell stack: A literature review 219. Moving parallel and transversal lines with touches on smartphones: a look through screenrecording 220. Behavioural response to heterogeneous severity of COVID-19 explains temporal variation of cases among different age groups 221. Non-extensive thermodynamic entropy to predict the dynamics behavior of COVID-19 222. Existence and Exponential Behavior for the Stochastic 2D Cahn–Hilliard–Oldroyd Model of Order One 223. Usefulness of PCM in building applications focusing on envelope heat exchange–Energy saving considering two scenarios 224. The Personalization of Learners’ Educational Paths E-learning 225. Exploiting low-grade waste heat to produce electricity through supercapacitor containing carbon electrodes and ionic liquid electrolytes 226. Deflection Modelling of MEMS Cantilever Beam Through Collocation Method Taking B-Splinesas Approximating Functions 227. Rheological approach to the adhesion property of metal‐plated acrylonitrile‐butadiene‐styrene to secure the driver’s safety 228. Thermodynamics of (nano) interfaces 229. Eigenfunction-based solution for one-dimensional solid-liquid phase change heat transfer problems with advection 230. Dynamics of deformable contacting bodies with sliding, rolling, and spinning 231. Self-consistent magneto-hydrodynamic modeling of ICP discharges 232. From point particles to body points 233. Estimating thermal properties of phase change material from heat flux measurements 234. A simple model for how the risk of pandemics from different virus families depends on viral and human traits 235. Repercussions of homogeneous and heterogeneous reactions of 3D flow of Cu-water and AL2O3-water nanofluid and entropy generation estimation along … 236. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys 237. Long-time dynamics of the Cahn–Hilliard equation with kinetic rate dependent dynamic boundary conditions 238. Investigation of MHD Casson fluid flow past a vertical porous plate under the influence of thermal diffusion and chemical reaction 239. Unsteady MHD oscillatory Casson fluid flow past an inclined vertical porous plate in the presence of chemical reaction with heat absorption and Soret effects 240. Influence of finite size of ions on thermal transport of a simultaneous electrokinetic-pressure driven flow of power-law fluids in a slit microchannel 241. Effect of interface deformation on hydrodynamics of liquid–liquid two-phase flow in a confined microchannel 242. Electrokinetic energy conversion of fluids with pressure-dependent viscosity in nanofluidic channels 243. A mixture theory analysis for reflection phenomenon of homogeneous plane-P1-wave at the boundary of unsaturated porothermoelastic media 244. Multiple Thixotropisms of Liquid Limit–Consistency Clays Unraveled by Multiscale Experimentation 245. Synergetic optimization of charge transport and breakdown strength of epoxy nanocomposites: Realizing sandwich topological structure through constructing a SiC … 246. Glare: A free and open-source software for generation and assessment of digital speckle pattern 247. Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT 248. Hybrid scanning electrochemical cell microscopy-interference reflection microscopy (SECCM-IRM): tracking phase formation on surfaces in small volumes 249. Effect of crump rubber on the solid particle erosion response of epoxy composites 250. Topology optimization for stability problems of submerged structures using the TOBS method 251. Effects of wall temperature and temperature-dependent viscosity on maximum spreading of water-in-oil emulsion droplet 252. Hydrocarbon emission control of a hydrocarbon adsorber and converter under cold start of the gasoline engine 253. REST-for-Physics, a ROOT-based framework for event oriented data analysis and combined Monte Carlo response 254. A perturbation method for evaluating the magnetic field induced from an arbitrary, asymmetric ocean world analytically 255. A comparative study of different types of sandwiched structures of SPR biosensor for sensitive detection of ssDNA 256. Educational psychology is evolving to accommodate technology, multiple disciplines, and Twenty-First-Century skills 257. Influence of mineralogy and surfactant concentration on zeta potential in intact sandstone at high pressure 258. A temperature-dependent atomistic-informed phase-field model to study dendritic growth 259. Scalar auxiliary variable approach for conservative/dissipative partial differential equations with unbounded energy functionals 260. Enhancing performance for three-phase induction motor by changing the magnetic flux density and core material using COMSOL 261. A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters 262. Experimental investigation and multiparameter analysis of variable conductance heat pipes 263. The Phenomenon of Electroporation 264. The existence of periodic solutions to doubly degenerate Allen-Cahn equation with Neumann boundary condition 265. Ferroelectric-HfO2/oxide interfaces, oxygen distribution effects, and implications for device performance 266. Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel 267. Three-dimensional physical simulation of water huff-n-puff in a tight oil reservoir with stimulated reservoir volume 268. Adaptive fuzzy global coupled nonsingular fast terminal sliding mode control of n-rigid-link elastic-joint robot manipulators in presence of uncertainties 269. Threshold Dynamics of an HIV-TB Co-infection Model with Multiple Time Delays 270. Harmful behaviour through plasmid transfer: a successful evolutionary strategy of bacteria harbouring conjugative plasmids 271. Study of Rivulet Flow Through Small Channels 272. Inlet Diffusor Buoyancy–Its Historical Use in Supersonic Transport Design 273. Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites 274. Nonlinear behaviors of the disc brake system under the effect of wheel− rail adhesion 275. Low Gravity Natural Convection and Pool Boiling Predictions 276. Polymer surface characterization 277. OpenMP application experiences: Porting to accelerated nodes 278. Anticipating critical transitions in psychological systems using early warning signals: Theoretical and practical considerations. 279. Why did cybernetics disappear from Latin America? 280. Anti-cavitation optimal design and experimental research on tidal turbines based on improved inverse BEM 281. Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer 282. Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by … 283. Epitaxial growth by atomic layer deposition and properties of high-k barium strontium titanate on Zintl-templated Ge (001) substrates 284. Experimental investigation and analytical modeling for blade-casing rubbing force 285. A Virtual Element Method for the wave equation on curved edges in two dimensions 286. CFD MODELING OF MICROCHANNELS COOLING FOR ELECTRONIC MICRODEVICES 287. Property enhancement in flexible poly (vinylidene fluoride)‐based piezoelectric films with large‐area preparation 288. A novel material based on deep eutectic solvents and its application in in‐situ modified silica‐reinforced styrene‐butadiene rubber 289. Internal flow phenomena of a Pump–Turbine model in turbine mode with different Thoma numbers 290. Preparation and properties enhancement of poly (lactic acid)/calcined‐seashell biocomposites for 3D printing applications 291. A Mechanics-Informed Artificial Neural Network Approach in Data-Driven Constitutive Modeling 292. Thermodynamic equilibrium and kinetic study of lanthanum chloride heptahydrate dehydration for thermal energy storage 293. Review of foam stability in porous media: The effect of coarsening 294. Household slow sand filters operating in continuous and intermittent flows: Computational fluid dynamics simulation and validation by tracer experiments 295. A numerical approach to investigate the impact of acid-asphaltene sludge formation on wormholing during carbonate acidizing 296. xc 297. Interface-Type Resistive Switching in Perovskite Materials 298. Hairpin RNA genetic algorithm based ANFIS for modeling overhead cranes 299. A quantitative assessment of the model form error of friction models across different interface representations for jointed structures 300. Limiting amplitude principle and resonances in plasmonic structures with corners: numerical investigation 301. Mesoscale perspective on the Tolman length 302. Hierarchical flaky porous carbon derived from waste polyimide film for high‐performance aqueous supercapacitor electrodes 303. A mortar formulation for frictionless line-to-line beam contact 304. A novel methodology to estimate the state-of-health and remaining-useful-life of a Li-ion battery using discrete Fourier transformation 305. Variability Estimation in Resistive Switching Devices, a Numerical and Kinetic Monte Carlo Perspective 306. eQuilibrator 3.0: a database solution for thermodynamic constant estimation 307. Metric Analysis of Big Data of Payment System Based on Kolmogorov–Shannon Coding Methods 308. Application of Image Analysis in Infrastructure Sector Fields—An Overview 309. A Framework of Runge–Kutta, Discontinuous Galerkin, Level Set and Direct Ghost Fluid Methods for the Multi-Dimensional Simulation of Underwater Explosions 310. Pressure transient behavior in a multilayer reservoir with formation crossflow 311. Big Data and the Studies of Communication in Brazil 312. Effects of wellbore irregularity on primary cementing of horizontal wells, part 2: Small scale effects 313. A bounded-confidence model of opinion dynamics on hypergraphs 314. SEISMIC SOIL–PILE-STRUCTURE INTERACTION ANALYSIS IN FREQUENCY DOMAIN USING FIXED BASE EIGEN VALUES USING TIME HISTRY METHOD. 315. Liquid–Liquid membrane contactors incorporating surface skin asymmetric hollow fibres of poly (4-methyl-1-pentene) for ammonium recovery as liquid … 316. Molecular Modeling for Corrosion Inhibitor Design 317. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets 318. Statistical test for anomalous diffusion based on empirical anomaly measure for Gaussian processes 319. Random Numbers and Simulation 320. The effects of ACRT on melt undercooling during the growth of CZT via the traveling heater method: Ekman versus Taylor-Görtler flows 321. Benchmarking and learning garbage collection delays for resource‐restricted graphical user interfaces 322. Adhesion strength, stability and electronic properties of TiB2 reinforced copper matrix composites: A first principles study 323. Rheological behaviour of attractive emulsions differing in droplet-droplet interaction strength 324. A hybrid numeric‐analytic solution for pulsed CEST 325. One can’t hear orientability of surfaces 326. Emergent gauge symmetries: making symmetry as well as breaking it 327. The coupled model of transient non-equilibrium interphase mass transfer rate of sliding bubble and two-phase flow in variable gradient drilling 328. Nonlinear inclusion theory with application to the growth and morphogenesis of a confined body 329. Finite element modeling of drainage holes and free surface within the complex seepage control structures: an overview 330. Ranked diffusion, delta Bose gas, and Burgers equation 331. Transformation Theory for Conduction Thermal Cloaking 332. Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis 333. Velocity-driven frictional sliding: Coarsening and steady-state pulses 334. Novel paraffin wax/ultra‐high molecular weight polyethylene composite phase change materials modified by carbon nanotubes with excellent combination property 335. Experimental and numerical studies on the heat transfer improvement of a latent heat storage unit using gradient tree-shaped fins 336. A Surface Energy Approach to Developing an Analytical Model for the Underfill Flow Process in Flip-Chip Packaging 337. Dispersion of Airborne Respiratory Saliva Droplets by Indoor Wake Flows 338. Recurrence analysis of friction based dry-couplant ultrasonic Lamb waves in plate-like structures 339. Membrane technologies for sports supplementation 340. Pore-Scaled investigation on dynamic carbonation mechanism of calcium oxide particles 341. Experimental Validation of Neural-Network-Based Nonlinear Reduced-Order Model for Vertical Sloshing 342. Review on Amphiphilic Ionic Liquids as New Surfactants: From Fundamentals to Applications 343. Apparent slip in colloidal suspensions 344. Implementation mobile app for foreign language acquisition based on structural visual method 345. Failure of the split property in gravity and the information paradox 346. Numerical simulation of methanol crossover in flowing electrolyte-direct methanol fuel cell 347. On a flexible multibody modelling approach using FE-based contact formulation for describing gear transmission error 348. Nonequilibrium in thermodynamic formalism: The second law, gases and information geometry 349. Experiments in Surface Gravity–Capillary Wave Turbulence 350. Improving gas barrier properties of sugarcane‐based LLDPE with cellulose nanocrystals 351. Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs 352. Experimental challenges in ion channel research: Uncovering basic principles of permeation and gating in potassium channels 353. Computationally efficient multiscale modeling for probabilistic analysis of CFRP composites with micro-scale spatial randomness 354. Review of Decision Support Systems and Allocation Models for Integrated Water Resources Management Focusing on Joint Water Quantity-Quality 355. Theoretical analysis of unsteady convective heat transfer from a flat plate with time-varying and spatially-varying temperature distribution 356. 3D numerical modeling of the effect of the drill string vibration cyclic loads on the wellbore natural fracture growth 357. Pressure-independent velocity error estimates for (Navier-) Stokes nonconforming virtual element discretization with divergence free 358. 3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing 359. Influence of pore space heterogeneity on mineral dissolution and permeability evolution investigated using lattice Boltzmann method 360. Direct Pore-Scale Simulations of Fully Periodic Unit Cells of Different Regular Lattices 361. Oxidation difference of microstructural bands in additive manufactured titanium alloy 362. The abrupt degradation of LiFePO4/graphite battery induced by electrode inhomogeneity 363. Chatter suppression in the milling process of the weakly-rigid workpiece through a moving fixture 364. A Novel Gelcast SiO2-Si3N4-BN Ceramic Composites for Radome Applications 365. Entropy generation minimization analysis of two immiscible fluids 366. A surrogate-based optimal likelihood function for the Bayesian calibration of catalytic recombination in atmospheric entry protection materials 367. An Arbitrary High Order Well-Balanced ADER-DG Numerical Scheme for the Multilayer Shallow-Water Model with Variable Density 368. Traveling wave vibration of graphene platelet reinforced porous joined conical-cylindrical shells in a spinning motion 369. Type reproduction number for epidemic models on heterogeneous networks 370. Postponing production exponentially enhances the molecular memory of a stochastic switch 371. Controllable perovskite crystallization via potassium pretreatment toward high-performance solar cells 372. Atmospheric propagation of space-fractional Gaussian-beam waves in a FSO communication system 373. Oscillation mitigation of hyperbolicity-preserving intrusive uncertainty quantification methods for systems of conservation laws 374. Comparison of interface capturing methods for the simulation of two-phase flow in a unified low-Mach framework 375. Integrated framework for SOH estimation of lithium-ion batteries using multiphysics features 376. Holistic Architecture 377. Green-chemical-jump-thickening polishing for silicon carbide 378. Filler‐size‐dependent dynamic mechanical properties of polyethylene glycol/zircon composites 379. Simulation of deformation and decomposition of droplets exposed to electro-hydrodynamic flow in a porous media by lattice Boltzmann method 380. Understanding components of mobility during the COVID-19 pandemic 381. Numerical simulation of molten pool formation during laser transmission welding between PET and SUS304 382. Wine Analytics: Futures or Bottles? 383. Modelling of Ultrasonic Wave Propagation Through the Border of Two Mediums 384. Symptoms of architecture erosion in code reviews: A study of two OpenStack projects 385. A peridynamic model for crevice corrosion damage 386. Effects of gradient porous metal foam on the melting performance and energy storage of composite phase change materials subjected to an internal heater: A … 387. Comparative and sensitive analysis on the filling, operating and performance patterns between the solar gravity heat pipe and the traditional gravity heat pipe 388. Numerical analysis of the effect of trapezoidal baffles inside fuel and air channels on the performance of a planar-type Solid Oxide Fuel Cell 389. Investigation on the aggregation structure of nanoparticle on the thermal conductivity of nanofluids by molecular dynamic simulations 390. A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects 391. Input addition and deletion in reinforcement: towards protean learning 392. Early Wear Fault Dynamics Analysis Method of Gear Coupled Rotor System Based on Dynamic Fractal Backlash 393. A predictive model for next cycle start date that accounts for adherence in menstrual self-tracking 394. The mechanism of gas-water extraction in micro-and nanoscale pores in shale gas reservoirs: Based on gas-water interactions 395. A review on heavy metal ions adsorption from water by layered double hydroxide and its composites 396. Collective minds: social network topology shapes collective cognition 397. Composite emulsifying behavior of egg white protein and rhamnolipid: Properties of the constructed high internal phase emulsions 398. Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending 399. Development of novel biocomposites based on the clean production of microbial cellulose from dairy waste (sour whey) 400. An Exhaustive Exploration of Electromagnetism for Underwater Wireless Sensor Networks 401. Characteristics of the multiphase flow field with super-cavitation induced by successively fired projectiles under-water and cross-medium 402. Electrospun Poly (ω-pentadecalactone-co-ε-caprolactone)/Gelatin/Chitosan Ternary Nanofibers with Antibacterial Activity for Treatment of Skin Infections 403. Computational Mechanics of Fluid-Structure Interaction 404. A friction model of fractal rough surfaces accounting for size dependence at nanoscale 405. Green synthesis of poly(o‐phenylenediamine) polymer film on stainless steel as a corrosion protection layer 406. Pressure infiltration of molten aluminum for densification of environmental barrier coatings 407. Breakup model of oscillating drops in turbulent flow field 408. Algorithms for activity correction models for geochemical speciation and reactive transport modeling 409. Co-evolution of Opinion and Social Tie Dynamics Towards Structural Balance∗ 410. Role of near-wall dynamics in roughness aided turbulent Rayleigh-Bénard convection 411. Experimental and computational investigation of flow boiling in microgravity 412. Melting and energy storage characteristics of macro-encapsulated PCM-metal foam system 413. Magnetic field-induced control of a compound ferrofluid droplet deformation and breakup in shear flow using a hybrid lattice Boltzmann-finite difference method 414. The philosophy of social ecology: Essays on dialectical naturalism 415. Separately global solutions to rate-independent processes in large-strain inelasticity 416. Study of multilayered composites through periodic homogenization and Mori–Tanaka methods 417. Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review 418. Microstructure evolution and fracture mechanism of a TiAl–Nb alloy during high-temperature tensile testing 419. Strain partitioning and damage initiation in a continuously cooled carbide free bainitic steel 420. A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness 421. Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution 422. Numerical investigation of thermomechanical response of multiscale porous ultra-High temperature ceramics 423. Computational fluid dynamics (CFD), artificial neural network (ANN) and genetic algorithm (GA) as a hybrid method for the analysis and optimization of micro … 424. Interference effect on tsunami generation by segmented seafloor deformations 425. Design and dynamic performance of a concentrated photovoltaic system with vapor chambers cooling 426. Generation and dynamics of soliton and soliton molecules from a VSe2/GO-based fiber laser 427. Effect of Cassie-Baxter versus Wenzel states on ice adhesion: A fracture toughness approach 428. Fuzzy inference system application for oil-water flow patterns identification 429. Architectural characteristics of different configurations based on new geometric determinations for the conoid 430. Effect of pipeline surface roughness on peak impact forces caused by hydrodynamic submarine mudflow 431. Systems Biology 432. A review of behavioral methods for the evaluation of cognitive performance in animal models: Current techniques and links to human cognition 433. A solution method for free vibration of intact and cracked polygonal thin plates using the Ritz method and Jacobi polynomials 434. Local asymptotic stability of a system of integro-differential equations describing clonal evolution of a self-renewing cell population under mutation 435. Parametric study of bow slamming for a KRISO container ship 436. QCD factorization and quantum mechanics 437. Numerical simulation for hydrocarbon production analysis considering Pre-Darcy flow in fractured porous media 438. A Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador 439. Dripping instability of a two-dimensional liquid film under an inclined plate 440. Bimetallic CoFe-MOF@ Ti3C2Tx MXene derived composites for broadband microwave absorption 441. Investigations into the drying kinetics of biomass in a fluidized bed dryer using electrostatic sensing and digital imaging techniques 442. Machine-learning-driven on-demand design of phononic beams 443. Modelling stress-induced permeability alterations in sandstones using CT scan-based representations of the pore space morphology 444. Energy minimizers for an asymptotic MEMS model with heterogeneous dielectric properties 445. Experimental and numerical studies on non-equilibrium gaseous solvent dissolution in heavy oil: A continuum-scale approach based on bubble-scale dissolution … 446. A specialized review on outlook of future Cyber-Physical Power System (CPPS) testbeds for securing electric power grid 447. Optimization of physico-chemical and membrane filtration processes to remove high molecular weight polymers from produced water in enhanced oil recovery … 448. Magnetoresponsive biocomposite hydrogels comprising gelatin and valine based magnetic ionic liquid surfactant as controlled release nanocarrier for drug … 449. Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities 450. New poly (lactic acid) composites produced from coffee beverage wastes 451. Characterizing alternating bubbles emerging from two interacting vertical gas jets in a liquid 452. Electrical properties of ZnO films implanted with rare earth and their relationship with structural and optical parameters 453. Cooling effect of droplet impacting on heated solid surface 454. A review on the transmission of COVID-19 based on cough/sneeze/breath flows 455. Multi-Hit Impact Resistance of Masonry Walls Under Large Mass 456. Nucleation and growth in solution synthesis of nanostructures–From fundamentals to advanced applications 457. A numerical study of the effects of cathode geometry on tungsten inert gas type electric arcs 458. Performance Analysis of a Neuro-Fuzzy Algorithm in Human-Centered and Non-invasive BCI 459. TINYV3RSE: The DART Vision-Based Navigation Test-bench 460. The case for a common software library and a set of enumerated benchmark problems in computer-aided molecular design 461. Nonlinear Photonics 462. Modelling density of pure and binary mixtures of normal alkanes: Comparison of hybrid soft computing techniques, gene expression programming, and equations of … 463. Modeling SARS-CoV-2: mitigation interventions and increased mobility events 464. Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test 465. Properties of Turbulence 466. Handling Neumann and Robin boundary conditions in a fictitious domain volume penalization framework 467. CFD-PBE coupled model for size-driven segregation in polydisperse granular flows 468. Effect of Self-Induced Body Vibrations on Thrust Generation in Bio-inspired Flying Robots 469. Cómo coadyuvan los modelos matemáticos a entender y combatir a la COVID-19 470. Control of transients in drinking water networks 471. Constitutional Provision in Protecting and Managing Indigenous Knowledge Systems: A Case From Rakhain Community in Bangladesh 472. A survey on Hilbert-Huang transform: Evolution, challenges and solutions 473. Modelling Thermal Conduction in Polydispersed and Sintered Nanoparticle Aggregates 474. Robust analysis of phylogenetic tree space 475. A hele-shaw limit without monotonicity 476. Loop-free tensor networks for high-energy physics 477. Systems analysis of the mechanisms governing the cardiovascular response to changes in posture and in peripheral demand during exercise 478. Wall-modeled large eddy simulations of a turbulent boundary layer over the Boeing speed bump at ReL = 2 million 479. Working Condition Monitoring and Virtual Simulation Method 480. Detailed DFT/MD simulation, surface analysis and electrochemical computer explorations of aldehyde derivatives for mild steel in 1.0 M HCl 481. Nonlinear size-dependent bending and forced vibration of internal flow-inducing pre-and post-buckled FG nanotubes 482. A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly (lactic acid) and poly (lactic acid) hybrid composites 483. Enhancing CO 2 photoreduction over ZIF-based reticular materials by morphology control of Au plasmonic nanoparticles 484. Electrospun polystyrene/graphene oxide fibers applied to the remediation of dye wastewater 485. Bone Ingrowth Around an Uncemented Femoral Implant Using Mechanoregulatory Algorithm: A Multiscale Finite Element Analysis 486. The influence of inflow swirls on phases separation in a Venturi tube 487. Permeability Decline by Clay Fines Migration around a Low‐Salinity Fluid Injection Well 488. Modeling of gas viscosity at high pressure-high temperature conditions: Integrating radial basis function neural network with evolutionary algorithms 489. A parallel cell-centered adaptive level set framework for efficient simulation of two-phase flows with subcycling and non-subcycling 490. Formation process of zirconia nanotubes and porous structures and model of oxygen bubble growth 491. A computational framework for rheologically complex thermo-visco-elastic materials 492. Unequal impact and spatial aggregation distort covid-19 growth rates 493. Drop Impact Dynamics: Impact Force and Stress Distributions 494. Indexed bibliography of genetic algorithms in physical sciences 495. Fully implicit two-phase VT-flash compositional flow simulation enhanced by multilayer nonlinear elimination 1. The impact of multiple-component PFAS solutions on fluid-fluid interfacial adsorption and transport of PFOS in unsaturated porous media 2. Investigation of the Effect of 3D Meniscus Geometry on Fluid Dynamics and Crystallization via In Situ Optical Microscopy‐Assisted Mathematical Modeling 3. Physical and Mathematical Modelling of Fluid and Heat Transport Phenomena in Porous Media 4. Acceptance of personalized e-learning systems: a case study of concept-effect relationship approach on science, technology, and mathematics courses 5. Using mathematical modelling to identify data requirements for increased prediction accuracy in radiotherapy 6. A mathematical model for CO2 conversion of CH4-producing biocathodes in microbial electrosynthesis systems 7. Critical Review of Emulsion Stability and Characterization Techniques in Oil Processing 8. Rapid eutectic growth: from rod growth to diffusionless solidification 9. Stress analysis of elastic bi-materials by using the localized method of fundamental solutions 10. Variability of complex oscillatory regimes in the stochastic model of cold-flame combustion of a hydrocarbon mixture 11. Reflection and transmission of waves at the common interface of piezoelectric half-spaces with microstructure 12. A screening model for quantifying PFAS leaching in the vadose zone and mass discharge to groundwater 13. A mathematical modelling of multiphysics-based propagation characteristics of surface wave in piezoelectric-hydrogel layer on an elastic substrate 14. DATA: Diafiltration Apparatus for high-Throughput Analysis 15. Mathematical modeling for bubbling fluidized bed CO-methanation reactor incorporating the effect of circulation and particle flows 16. Effective interface conditions for continuum mechanical models describing the invasion of multiple cell populations through thin membranes 17. Challenges of numerical simulation of dynamic wetting phenomena: a review 18. Mathematical model of two-phase Taylor flow hydrodynamics for four combinations of non-Newtonian and Newtonian fluids in microchannels 19. Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions 20. Coloured-noise-induced transport in a model of the thermochemical reactor 21. A review on mathematical modelling of Direct Internal Reforming-Solid Oxide Fuel Cells 22. Structure diagram and dynamics of formation of hexagonal boron nitride in phase-field crystal model 23. Effect of fluorocarbon surfactants on the adsorption of hydrocarbon surfactants mixture at the water-air interface 24. Optimal convergence analysis of the energy-preserving immersed weak Galerkin method for second-order hyperbolic interface problems in inhomogeneous media 25. Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags 26. Instability of a planar fluid interface under a tangential electric field in a stagnation point flow 27. Boiling crisis due to bubble interactions 28. Hydrothermal variations of radiative nanofluid flow by the influence of nanoparticles diameter and nanolayer 29. Mathematical modeling of physical processes in metals and ordered alloys 30. Optimization of battery charging strategy based on nonlinear model predictive control 31. Predicting concurrent structural mechanical mechanisms during microstructure evolution 32. Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence 33. Characteristics of thermophoresis and Brownian motion on radiative reactive micropolar fluid flow towards continuously moving flat plate: HAM solution 34. A theoretical and numerical analysis of a Dirichlet-Neumann domain decomposition method for diffusion problems in heterogeneous media 35. Continuum and Molecular Dynamics Studies of the Hydrodynamics of Colloids Straddling a Fluid Interface 36. Modelling of defects in aluminium cast products 37. Modelling of hemodynamics in bifurcation lesions of coronary arteries before and after myocardial revascularization 38. Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys 39. Role of zirconia phase transformation, interface processes, and Ta2O5 doping on the blistering phenomenon of molten glass in contact with zirconia-based … 40. Simulation of electric field control effects on the ion transport in proton exchange membranes for application in fuel cells and electrolysers 41. Calcium Signaling in the Photodamaged Skin: In Vivo Experiments and Mathematical Modeling 42. On ultrasound propagation in composite laminates: advances in numerical simulation 43. ALPACA-a level-set based sharp-interface multiresolution solver for conservation laws 44. Investigation of a sintering phenomenon through master sintering curve based on python software 45. Improving single-lap joint load bearing by bioinspired interlocking patterns on substrates 46. A phase field model for hydrogen-assisted fatigue 47. Depth-averaged coupling of submerged granular deformation with fluid flow: An augmented HLL scheme 48. Investigating the Unsteady Shock Bubble Multiphase Interactions 49. Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains 50. Performance analysis of aqueous LiCl and CaCl2 based falling film dehumidifier with surface modification 51. DEM-BEM coupling in time domain for one-dimensional wave propagation 52. Atomic-scale growth, imaging, spectroscopy, and electronic transport properties of metal-oxide films and interfaces 53. Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach 54. Thermal flow characteristics and the evolution of laser absorption in laser powder bed fusion of Cu-Cr-Zr alloy 55. Analysis of Damage and Failure mechanism under a lubricated slipper/swashplate interface in Axial Piston Machines 56. Thermoelectric Generators: A comprehensive review of characteristics and applications 57. Experimental study of the shear strength of a snow-mortar interface 58. Assisting/opposing/forced convection flow on entropy‐optimized MHD nanofluids with variable viscosity: Interfacial layer and shape effects 59. Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting 60. Modelling the adsorption of proteins to nanoparticles at the solid-liquid interface 61. Beam wobbling effects on laser transmission welding of dissimilar polymers: Experiments, modeling, and process optimization 62. Induced side-branching in smooth and faceted dendrites: theory and phase-field simulations 63. Simulation of Performance and Emissions Related Parameters in a Thermal Engine Using a Deep Learning Approach 64. Human cumulative culture and the exploitation of natural phenomena 65. Amorphization and nanocrystal formation in a Pd–Ni–Cu–P alloy after cooling under different conditions 66. Fuzzy Dynamical System in Alcohol-Related Health Risk Behaviors and Beliefs 67. Modelling of liquid film migration in Al-Cu alloys 68. A dynamic model of CO2 diffusion coefficient in shale based on the whole process fitting 69. Modeling polymer-metal frictional interface using multi-asperity contact theory 70. Does Machine Learning Offer Added Value vis-à-vis Traditional Statistics? An Exploratory Study on Retirement Decisions Using Data from the Survey of Health … 71. Simulation of Fracture Formation in Solid Oxide Fuel Cell Anode Using Peridynamic Modeling Method 72. Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation 73. Leveraging Prediction and Reflection in a Computational Setting to Enrich Undergraduate Students’ Combinatorial Thinking 74. Secondary and Tertiary Oil Recovery Processes 75. Investigation of the blast pressure following laser ablation at a solid–fluid interface using shock waves dynamics in air and in water 76. Investigation of the low-frequency stray current induced corrosion on reinforced concrete infrastructure in high-speed rail transit power supply system 77. Modeling nonlinear bending of axisymmetric circular nano-plates in framework of Ru’s surface stress elasticity theory 78. Modeling of the sedimentation process of monodisperse suspension 79. On Seawater Conductivity Control by Acoustic Radiation 80. Robust state-feedback stabilization of an underactuated network of interconnected n+ m hyperbolic PDE systems 81. Role of liquid and solid particles in solid-liquid mixed fluxes on sulfur removal from molten iron under centrifugal stirring by an impeller 82. Thin-film Rayleigh–Taylor instability in the presence of a deep periodic corrugated wall 83. Optothermal grid activation of microflow with magnetic nanoparticle thermophoresis for microfluidics 84. Modeling and simulation for estimating thin film lubrication effects on flow of Jeffrey liquid by a spiraling disk 85. Digitally-transformed early-warning protocol for membrane cleaning based on a fouling-cumulative sum chart: Application to a full-scale MBR plant 86. Analysis of fabrication and crack-induced porosity migration in mixed oxide fuels for sodium fast reactors by the finite element method 87. Modeling of micro-channel critical flow with inlet sub-cooling: Metastable liquid and nucleation 88. Structure–properties‐performance relationships in complex epoxy nanocomposites: A complete picture applying chemorheological and thermo‐mechanical kinetic … 89. Thermo-mechanical coupling shock waves propagation with phase transition under impact loading 90. Boundary integral formulations for acoustic modelling of high-contrast media 91. Design and Simulation of MEMS Based Capacitive Accelerometer 92. A non-standard numerical method for finite element modelling of tensile cracks in quasi-brittle material 93. The applicability of shungite as an electrically conductive additive in cement composites 94. A federated learning method for network intrusion detection 95. A hybrid partitioned deep learning methodology for moving interface and fluid–structure interaction 96. On the crystal growth kinetics of ultra‐toughened biobased polyamide 410: New insights on dynamic crystallization 97. Riemann solvers of a conserved high-order traffic flow model with discontinuous fluxes 98. Toward a Mechanistic Account of Extended Cognition 99. On the Development of Icephobic Surfaces: Bridging Experiments and Simulations 100. Competing spreading dynamics in simplicial complex 101. Local thermal non-equilibrium (LTNE) effects on thermal-free convection in a nanofluid-saturated horizontal elliptical non-Darcian porous annulus 102. Feature-based modeling for industrial processes in the context of digital twins: A case study of HVOF process 103. Further enhancement of the particle shifting technique: Towards better volume conservation and particle distribution in SPH simulations of violent free-surface flows 104. Epoxy-based/BaTiO3 nanodielectrics: Relaxation dynamics, charge transport and energy storage 105. Numerical assessment of thermal characteristics of metal foams of orderly varied pore density and porosity under different convection regimes 106. Modeling the recent outbreak of COVID-19 in India and its control strategies 107. Computation of unsteady generalized Couette flow and heat transfer in immiscible dusty and non‐dusty fluids with viscous heating and wall suction effects using a … 108. Analysis of adverse influence of metal vapor to arc movement between electrodes with external magnetic field applied by numerical simulation 109. Towards quantum simulations in particle physics and beyond on noisy intermediate-scale quantum devices 110. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites 111. A critical review on the electrosorption of organic compounds in aqueous effluent–Influencing factors and engineering considerations 112. Dip coating of cylinders with Newtonian fluids 113. Sub-Sampled Imaging for STEM: Maximising Image Speed, Resolution and Precision Through Reconstruction Parameter Refinement 114. Pore-scale study of the multiphase methane hydrate dissociation dynamics and mechanisms in the sediment 115. On geometrical properties of electromagnetic transmission eigenfunctions and artificial mirage 116. Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction 117. Impact of Respiratory Fluctuation on Hemodynamics in Human Cardiovascular System: A 0-1D Multiscale Model 118. Density-based turbulence damping at large-scale interface for Reynolds-averaged two-fluid models 119. Intelligent Design Optimization System for Additively Manufactured Flow Channels Based on Fluid–Structure Interaction 120. Induced magnetic field and viscous dissipation on flows of two immiscible fluids in a rectangular channel 121. A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer 122. Analysis of entropy generation in AA7072-methanol and AA7072+ AA7075-methanol flow near a parabolic surface 123. Multiscale topology optimization for graded cellular structures based on level set surface cutting 124. Marangoni convection flow of γ–Al2O3 nanofluids past a porous stretching surface with thermal radiation effect in the presence of an inclined magnetic field 125. Alkaline flooding 126. Nonmonotonic Pair Potentials in the Interaction of Like-Charged Objects in Solution 127. A Seamless, Extended DG Approach for Advection–Diffusion Problems on Unbounded Domains 128. 多模态瑞利-泰勒不稳定性的离散玻尔兹曼数值研究 129. Study of Parameters Influencing on the Performance of SiNW ISFET Sensor 130. Numerical analysis and safety design of grounding systems in underground compact substations 131. Pathway modeling and simulation analysis 132. A study of the generalized nonlinear advection-diffusion equation arising in engineering sciences 133. Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel 134. Sources of funding CSF 135. Dynamic magnetic birefringence in a viscoelastic ferrocolloid 136. Accelerated weathering effects on mechanical, thermal and viscoelastic properties of kenaf/pineapple biocomposite laminates for load bearing structural applications 137. Indexical AI 138. A numerical integration strategy of meshless numerical manifold method based on physical cover and applications to linear elastic fractures 139. Steepened wave in two-phase Chaplygin flows comprising a source term 140. A two-phase three-field modeling framework for heat pipe application in nuclear reactors 141. Effect of surfactant addition and viscosity of the continuous phase on flow fields and kinetics of drop formation in a flow-focusing microfluidic device 142. Update on emerging technologies including novel applications: radio frequency 143. Fundamental fluid dynamics challenges in inkjet printing 144. A stochastic model for nanoparticle deposits growth 145. Finite state graphon games with applications to epidemics 146. An analytical solution on spontaneous imbibition coupled with fractal roughness, slippage and gravity effects in low permeability reservoir 147. Diffusion, aggregation and electrokinetics 148. Influence of asphaltenes and resins on water/model oil interfacial tension and emulsion behavior: Comparison of extracted fractions from crude oils with different … 149. Volume of fluid-based numerical analysis of a pump-driven phase change heat transport device 150. Resolvent Estimates for a Compressible Fluid Model of Korteweg Type and Their Application 151. A comprehensive study of droplet formation in a capillary embedded step T-junction: From squeezing to jetting 152. Generalized thermal investigation of unsteady MHD flow of Oldroyd-B fluid with slip effects and Newtonian heating; a Caputo-Fabrizio fractional model 153. Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures 154. Effect of ionic liquids on thermomechanical properties of polyetheretherketone‐multiwalled carbon nanotubes nanocomposites 155. A melamine‐based covalent organic framework nanomaterial as a nanofiller in polyethersulfone mixed matrix membranes to improve separation and antifouling … 156. Data-Driven optimization of blast furnace iron making process using evolutionary deep learning 157. Provably non-stiff implementation of weak coupling conditions for hyperbolic problems 158. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites 159. An alternating-direction hybrid implicit-explicit finite-difference time-domain method for the Schrödinger equation 160. Co-encapsulation of curcumin and β-carotene in Pickering emulsions stabilized by complex nanoparticles: Effects of microfluidization and thermal treatment 161. Modified nanocrystalline cellulose partially replaced carbon black to reinforce natural rubber composites 162. Modeling of cooling and heat conduction in permanent mold casting process 163. Smooth finite element construction and correction method based on hybrid FE-SEA model 164. Implications of capillarity-wettability interaction on geometrically mediated droplet splitting mechanism 165. Wave power extraction for an oscillating water column device consisting of a surging front and back lip-wall: An analytical study 166. Impacts of wave-induced ocean surface turbulent kinetic energy flux on typhoon characteristics 167. An iterative analytical model for aging analysis of Li-ion cells 168. Effect of interfacial damping on high-frequency surface wave resonance on a nanostrip-bonded substrate 169. Experimental characterisation of sloshing tank dissipative behaviour in vertical harmonic excitation 170. Modelling of environmental ageing of polymers and polymer composites—modular and multiscale methods 171. On the selective laser melting based additive manufacturing of AlSi10Mg: The process parameter investigation through multiphysics simulation and experimental … 172. Isogeometric multilevel quadrature for forward and inverse random acoustic scattering 173. Using incomplete complex modes for model updating of monopiled offshore wind turbines 174. How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes? 175. Open capillary siphons 176. Modeling and simulation of a multi-bed industrial reactor for renewable diesel hydroprocessing 177. Reflectance Spectra Analysis Algorithms for the Characterization of Deposits and Condensed Traces on Surfaces 178. Numerical simulation of fuel dribbling and nozzle wall wetting 179. Dynamical analysis of two-pathogen coinfection in influenza and other respiratory diseases 180. Collaborative Decision-Making Centres for Sustainable Energy 181. Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology 182. A collaborative design platform for new alloy material development 183. Surface engineering and on-site charge neutralization for the regulation of contact electrification 184. Synthesis of PVDF‐B4C mixed matrix membrane for ultrafiltration of protein and photocatalytic dye removal 185. Nonconforming time discretization based on Robin transmission conditions for the Stokes–Darcy system 186. Parameter inversion and microscopic damage research on discrete element model of cement-stabilized steel slag based on 3D scanning technology 187. Atomistic elucidation of mechanical properties and fracture phenomenon of defective indium selenide monolayer 188. Insights into fracture mechanisms and strength behaviors of two-dimensional carbon fiber reinforced silicon carbide composites at elevated temperatures 189. Longitudinal remagnetization of uniaxial antiferromagnetic nanoparticles: the role of spontaneous magnetic moment 190. Progress and challenges on the thermal management of electrochemical energy conversion and storage technologies: Fuel cells, electrolysers, and … 191. Solution landscape of the Onsager model identifies non-axisymmetric critical points 192. Quantification of gas exsolution and preferential diffusion for alkane solvent (s)–CO2–heavy oil systems under nonequilibrium conditions 193. Fire whirls: a combustion science perspective 194. Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges 195. Effects of Textured Surfaces on Skin Friction 196. Dynamics of evaporating respiratory droplets in the vicinity of vortex dipoles 197. Direct observations of ultrasonically generated hot spots in polymer composite energetic materials 198. Surfactants and nanoscience 199. Friction-induced vibration of a slider-on-rotating-disc system considering uniform and non-uniform friction characteristics with bi-stability 200. Unsteady mixed convection flow of magneto-Williamson nanofluid due to stretched cylinder with significant non-uniform heat source/sink features 201. Interface sintering engineered superhydrophobic and durable nanofiber composite for high-performance electromagnetic interference shielding 202. Carbon dioxide diffusions in methane-dissolved pore fluids: implications for geological carbon storage and utilization in tight formations 203. Fractal dimension of India using multicore parallel processing 204. Stability-based optimization of ACRT for the growth of CZT by the traveling heater method 205. Smart healthcare security device on medical IoT using raspberry pi 206. Tribology—A Tool for Mechanical and Industrial Engineering 207. A Second Order Energy Dissipative Scheme for Time Fractional L 2 Gradient Flows using SAV Approach 208. Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency 209. Effects of low frequency multi-mode ultrasound and it’s washing solution’s interface properties on freshly cut cauliflower 210. An approach to simulate gas-solid flow systems with process controllers 211. Nonreciprocal and non-Hermitian material response inspired by semiconductor transistors 212. Theory and applications of new fractional-order chaotic system under Caputo operator 213. Numerical analysis on stability of functionally graded graphene platelets (GPLs) reinforced dielectric composite plate 214. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components 215. Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy 216. Unsteady aerodynamic forces on a tapered prism during the combined vibration of VIV and galloping 217. Bounds on quantum information storage and retrieval 218. Assembly techniques for proton exchange membrane fuel cell stack: A literature review 219. Moving parallel and transversal lines with touches on smartphones: a look through screenrecording 220. Behavioural response to heterogeneous severity of COVID-19 explains temporal variation of cases among different age groups 221. Non-extensive thermodynamic entropy to predict the dynamics behavior of COVID-19 222. Existence and Exponential Behavior for the Stochastic 2D Cahn–Hilliard–Oldroyd Model of Order One 223. Usefulness of PCM in building applications focusing on envelope heat exchange–Energy saving considering two scenarios 224. The Personalization of Learners’ Educational Paths E-learning 225. Exploiting low-grade waste heat to produce electricity through supercapacitor containing carbon electrodes and ionic liquid electrolytes 226. Deflection Modelling of MEMS Cantilever Beam Through Collocation Method Taking B-Splinesas Approximating Functions 227. Rheological approach to the adhesion property of metal‐plated acrylonitrile‐butadiene‐styrene to secure the driver’s safety 228. Thermodynamics of (nano) interfaces 229. Eigenfunction-based solution for one-dimensional solid-liquid phase change heat transfer problems with advection 230. Dynamics of deformable contacting bodies with sliding, rolling, and spinning 231. Self-consistent magneto-hydrodynamic modeling of ICP discharges 232. From point particles to body points 233. Estimating thermal properties of phase change material from heat flux measurements 234. A simple model for how the risk of pandemics from different virus families depends on viral and human traits 235. Repercussions of homogeneous and heterogeneous reactions of 3D flow of Cu-water and AL2O3-water nanofluid and entropy generation estimation along … 236. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys 237. Long-time dynamics of the Cahn–Hilliard equation with kinetic rate dependent dynamic boundary conditions 238. Investigation of MHD Casson fluid flow past a vertical porous plate under the influence of thermal diffusion and chemical reaction 239. Unsteady MHD oscillatory Casson fluid flow past an inclined vertical porous plate in the presence of chemical reaction with heat absorption and Soret effects 240. Influence of finite size of ions on thermal transport of a simultaneous electrokinetic-pressure driven flow of power-law fluids in a slit microchannel 241. Effect of interface deformation on hydrodynamics of liquid–liquid two-phase flow in a confined microchannel 242. Electrokinetic energy conversion of fluids with pressure-dependent viscosity in nanofluidic channels 243. A mixture theory analysis for reflection phenomenon of homogeneous plane-P1-wave at the boundary of unsaturated porothermoelastic media 244. Multiple Thixotropisms of Liquid Limit–Consistency Clays Unraveled by Multiscale Experimentation 245. Synergetic optimization of charge transport and breakdown strength of epoxy nanocomposites: Realizing sandwich topological structure through constructing a SiC … 246. Glare: A free and open-source software for generation and assessment of digital speckle pattern 247. Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT 248. Hybrid scanning electrochemical cell microscopy-interference reflection microscopy (SECCM-IRM): tracking phase formation on surfaces in small volumes 249. Effect of crump rubber on the solid particle erosion response of epoxy composites 250. Topology optimization for stability problems of submerged structures using the TOBS method 251. Effects of wall temperature and temperature-dependent viscosity on maximum spreading of water-in-oil emulsion droplet 252. Hydrocarbon emission control of a hydrocarbon adsorber and converter under cold start of the gasoline engine 253. REST-for-Physics, a ROOT-based framework for event oriented data analysis and combined Monte Carlo response 254. A perturbation method for evaluating the magnetic field induced from an arbitrary, asymmetric ocean world analytically 255. A comparative study of different types of sandwiched structures of SPR biosensor for sensitive detection of ssDNA 256. Educational psychology is evolving to accommodate technology, multiple disciplines, and Twenty-First-Century skills 257. Influence of mineralogy and surfactant concentration on zeta potential in intact sandstone at high pressure 258. A temperature-dependent atomistic-informed phase-field model to study dendritic growth 259. Scalar auxiliary variable approach for conservative/dissipative partial differential equations with unbounded energy functionals 260. Enhancing performance for three-phase induction motor by changing the magnetic flux density and core material using COMSOL 261. A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters 262. Experimental investigation and multiparameter analysis of variable conductance heat pipes 263. The Phenomenon of Electroporation 264. The existence of periodic solutions to doubly degenerate Allen-Cahn equation with Neumann boundary condition 265. Ferroelectric-HfO2/oxide interfaces, oxygen distribution effects, and implications for device performance 266. Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel 267. Three-dimensional physical simulation of water huff-n-puff in a tight oil reservoir with stimulated reservoir volume 268. Adaptive fuzzy global coupled nonsingular fast terminal sliding mode control of n-rigid-link elastic-joint robot manipulators in presence of uncertainties 269. Threshold Dynamics of an HIV-TB Co-infection Model with Multiple Time Delays 270. Harmful behaviour through plasmid transfer: a successful evolutionary strategy of bacteria harbouring conjugative plasmids 271. Study of Rivulet Flow Through Small Channels 272. Inlet Diffusor Buoyancy–Its Historical Use in Supersonic Transport Design 273. Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites 274. Nonlinear behaviors of the disc brake system under the effect of wheel− rail adhesion 275. Low Gravity Natural Convection and Pool Boiling Predictions 276. Polymer surface characterization 277. OpenMP application experiences: Porting to accelerated nodes 278. Anticipating critical transitions in psychological systems using early warning signals: Theoretical and practical considerations. 279. Why did cybernetics disappear from Latin America? 280. Anti-cavitation optimal design and experimental research on tidal turbines based on improved inverse BEM 281. Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer 282. Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by … 283. Epitaxial growth by atomic layer deposition and properties of high-k barium strontium titanate on Zintl-templated Ge (001) substrates 284. Experimental investigation and analytical modeling for blade-casing rubbing force 285. A Virtual Element Method for the wave equation on curved edges in two dimensions 286. CFD MODELING OF MICROCHANNELS COOLING FOR ELECTRONIC MICRODEVICES 287. Property enhancement in flexible poly (vinylidene fluoride)‐based piezoelectric films with large‐area preparation 288. A novel material based on deep eutectic solvents and its application in in‐situ modified silica‐reinforced styrene‐butadiene rubber 289. Internal flow phenomena of a Pump–Turbine model in turbine mode with different Thoma numbers 290. Preparation and properties enhancement of poly (lactic acid)/calcined‐seashell biocomposites for 3D printing applications 291. A Mechanics-Informed Artificial Neural Network Approach in Data-Driven Constitutive Modeling 292. Thermodynamic equilibrium and kinetic study of lanthanum chloride heptahydrate dehydration for thermal energy storage 293. Review of foam stability in porous media: The effect of coarsening 294. Household slow sand filters operating in continuous and intermittent flows: Computational fluid dynamics simulation and validation by tracer experiments 295. A numerical approach to investigate the impact of acid-asphaltene sludge formation on wormholing during carbonate acidizing 296. xc 297. Interface-Type Resistive Switching in Perovskite Materials 298. Hairpin RNA genetic algorithm based ANFIS for modeling overhead cranes 299. A quantitative assessment of the model form error of friction models across different interface representations for jointed structures 300. Limiting amplitude principle and resonances in plasmonic structures with corners: numerical investigation 301. Mesoscale perspective on the Tolman length 302. Hierarchical flaky porous carbon derived from waste polyimide film for high‐performance aqueous supercapacitor electrodes 303. A mortar formulation for frictionless line-to-line beam contact 304. A novel methodology to estimate the state-of-health and remaining-useful-life of a Li-ion battery using discrete Fourier transformation 305. Variability Estimation in Resistive Switching Devices, a Numerical and Kinetic Monte Carlo Perspective 306. eQuilibrator 3.0: a database solution for thermodynamic constant estimation 307. Metric Analysis of Big Data of Payment System Based on Kolmogorov–Shannon Coding Methods 308. Application of Image Analysis in Infrastructure Sector Fields—An Overview 309. A Framework of Runge–Kutta, Discontinuous Galerkin, Level Set and Direct Ghost Fluid Methods for the Multi-Dimensional Simulation of Underwater Explosions 310. Pressure transient behavior in a multilayer reservoir with formation crossflow 311. Big Data and the Studies of Communication in Brazil 312. Effects of wellbore irregularity on primary cementing of horizontal wells, part 2: Small scale effects 313. A bounded-confidence model of opinion dynamics on hypergraphs 314. SEISMIC SOIL–PILE-STRUCTURE INTERACTION ANALYSIS IN FREQUENCY DOMAIN USING FIXED BASE EIGEN VALUES USING TIME HISTRY METHOD. 315. Liquid–Liquid membrane contactors incorporating surface skin asymmetric hollow fibres of poly (4-methyl-1-pentene) for ammonium recovery as liquid … 316. Molecular Modeling for Corrosion Inhibitor Design 317. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets 318. Statistical test for anomalous diffusion based on empirical anomaly measure for Gaussian processes 319. Random Numbers and Simulation 320. The effects of ACRT on melt undercooling during the growth of CZT via the traveling heater method: Ekman versus Taylor-Görtler flows 321. Benchmarking and learning garbage collection delays for resource‐restricted graphical user interfaces 322. Adhesion strength, stability and electronic properties of TiB2 reinforced copper matrix composites: A first principles study 323. Rheological behaviour of attractive emulsions differing in droplet-droplet interaction strength 324. A hybrid numeric‐analytic solution for pulsed CEST 325. One can’t hear orientability of surfaces 326. Emergent gauge symmetries: making symmetry as well as breaking it 327. The coupled model of transient non-equilibrium interphase mass transfer rate of sliding bubble and two-phase flow in variable gradient drilling 328. Nonlinear inclusion theory with application to the growth and morphogenesis of a confined body 329. Finite element modeling of drainage holes and free surface within the complex seepage control structures: an overview 330. Ranked diffusion, delta Bose gas, and Burgers equation 331. Transformation Theory for Conduction Thermal Cloaking 332. Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis 333. Velocity-driven frictional sliding: Coarsening and steady-state pulses 334. Novel paraffin wax/ultra‐high molecular weight polyethylene composite phase change materials modified by carbon nanotubes with excellent combination property 335. Experimental and numerical studies on the heat transfer improvement of a latent heat storage unit using gradient tree-shaped fins 336. A Surface Energy Approach to Developing an Analytical Model for the Underfill Flow Process in Flip-Chip Packaging 337. Dispersion of Airborne Respiratory Saliva Droplets by Indoor Wake Flows 338. Recurrence analysis of friction based dry-couplant ultrasonic Lamb waves in plate-like structures 339. Membrane technologies for sports supplementation 340. Pore-Scaled investigation on dynamic carbonation mechanism of calcium oxide particles 341. Experimental Validation of Neural-Network-Based Nonlinear Reduced-Order Model for Vertical Sloshing 342. Review on Amphiphilic Ionic Liquids as New Surfactants: From Fundamentals to Applications 343. Apparent slip in colloidal suspensions 344. Implementation mobile app for foreign language acquisition based on structural visual method 345. Failure of the split property in gravity and the information paradox 346. Numerical simulation of methanol crossover in flowing electrolyte-direct methanol fuel cell 347. On a flexible multibody modelling approach using FE-based contact formulation for describing gear transmission error 348. Nonequilibrium in thermodynamic formalism: The second law, gases and information geometry 349. Experiments in Surface Gravity–Capillary Wave Turbulence 350. Improving gas barrier properties of sugarcane‐based LLDPE with cellulose nanocrystals 351. Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs 352. Experimental challenges in ion channel research: Uncovering basic principles of permeation and gating in potassium channels 353. Computationally efficient multiscale modeling for probabilistic analysis of CFRP composites with micro-scale spatial randomness 354. Review of Decision Support Systems and Allocation Models for Integrated Water Resources Management Focusing on Joint Water Quantity-Quality 355. Theoretical analysis of unsteady convective heat transfer from a flat plate with time-varying and spatially-varying temperature distribution 356. 3D numerical modeling of the effect of the drill string vibration cyclic loads on the wellbore natural fracture growth 357. Pressure-independent velocity error estimates for (Navier-) Stokes nonconforming virtual element discretization with divergence free 358. 3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing 359. Influence of pore space heterogeneity on mineral dissolution and permeability evolution investigated using lattice Boltzmann method 360. Direct Pore-Scale Simulations of Fully Periodic Unit Cells of Different Regular Lattices 361. Oxidation difference of microstructural bands in additive manufactured titanium alloy 362. The abrupt degradation of LiFePO4/graphite battery induced by electrode inhomogeneity 363. Chatter suppression in the milling process of the weakly-rigid workpiece through a moving fixture 364. A Novel Gelcast SiO2-Si3N4-BN Ceramic Composites for Radome Applications 365. Entropy generation minimization analysis of two immiscible fluids 366. A surrogate-based optimal likelihood function for the Bayesian calibration of catalytic recombination in atmospheric entry protection materials 367. An Arbitrary High Order Well-Balanced ADER-DG Numerical Scheme for the Multilayer Shallow-Water Model with Variable Density 368. Traveling wave vibration of graphene platelet reinforced porous joined conical-cylindrical shells in a spinning motion 369. Type reproduction number for epidemic models on heterogeneous networks 370. Postponing production exponentially enhances the molecular memory of a stochastic switch 371. Controllable perovskite crystallization via potassium pretreatment toward high-performance solar cells 372. Atmospheric propagation of space-fractional Gaussian-beam waves in a FSO communication system 373. Oscillation mitigation of hyperbolicity-preserving intrusive uncertainty quantification methods for systems of conservation laws 374. Comparison of interface capturing methods for the simulation of two-phase flow in a unified low-Mach framework 375. Integrated framework for SOH estimation of lithium-ion batteries using multiphysics features 376. Holistic Architecture 377. Green-chemical-jump-thickening polishing for silicon carbide 378. Filler‐size‐dependent dynamic mechanical properties of polyethylene glycol/zircon composites 379. Simulation of deformation and decomposition of droplets exposed to electro-hydrodynamic flow in a porous media by lattice Boltzmann method 380. Understanding components of mobility during the COVID-19 pandemic 381. Numerical simulation of molten pool formation during laser transmission welding between PET and SUS304 382. Wine Analytics: Futures or Bottles? 383. Modelling of Ultrasonic Wave Propagation Through the Border of Two Mediums 384. Symptoms of architecture erosion in code reviews: A study of two OpenStack projects 385. A peridynamic model for crevice corrosion damage 386. Effects of gradient porous metal foam on the melting performance and energy storage of composite phase change materials subjected to an internal heater: A … 387. Comparative and sensitive analysis on the filling, operating and performance patterns between the solar gravity heat pipe and the traditional gravity heat pipe 388. Numerical analysis of the effect of trapezoidal baffles inside fuel and air channels on the performance of a planar-type Solid Oxide Fuel Cell 389. Investigation on the aggregation structure of nanoparticle on the thermal conductivity of nanofluids by molecular dynamic simulations 390. A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects 391. Input addition and deletion in reinforcement: towards protean learning 392. Early Wear Fault Dynamics Analysis Method of Gear Coupled Rotor System Based on Dynamic Fractal Backlash 393. A predictive model for next cycle start date that accounts for adherence in menstrual self-tracking 394. The mechanism of gas-water extraction in micro-and nanoscale pores in shale gas reservoirs: Based on gas-water interactions 395. A review on heavy metal ions adsorption from water by layered double hydroxide and its composites 396. Collective minds: social network topology shapes collective cognition 397. Composite emulsifying behavior of egg white protein and rhamnolipid: Properties of the constructed high internal phase emulsions 398. Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending 399. Development of novel biocomposites based on the clean production of microbial cellulose from dairy waste (sour whey) 400. An Exhaustive Exploration of Electromagnetism for Underwater Wireless Sensor Networks 401. Characteristics of the multiphase flow field with super-cavitation induced by successively fired projectiles under-water and cross-medium 402. Electrospun Poly (ω-pentadecalactone-co-ε-caprolactone)/Gelatin/Chitosan Ternary Nanofibers with Antibacterial Activity for Treatment of Skin Infections 403. Computational Mechanics of Fluid-Structure Interaction 404. A friction model of fractal rough surfaces accounting for size dependence at nanoscale 405. Green synthesis of poly(o‐phenylenediamine) polymer film on stainless steel as a corrosion protection layer 406. Pressure infiltration of molten aluminum for densification of environmental barrier coatings 407. Breakup model of oscillating drops in turbulent flow field 408. Algorithms for activity correction models for geochemical speciation and reactive transport modeling 409. Co-evolution of Opinion and Social Tie Dynamics Towards Structural Balance∗ 410. Role of near-wall dynamics in roughness aided turbulent Rayleigh-Bénard convection 411. Experimental and computational investigation of flow boiling in microgravity 412. Melting and energy storage characteristics of macro-encapsulated PCM-metal foam system 413. Magnetic field-induced control of a compound ferrofluid droplet deformation and breakup in shear flow using a hybrid lattice Boltzmann-finite difference method 414. The philosophy of social ecology: Essays on dialectical naturalism 415. Separately global solutions to rate-independent processes in large-strain inelasticity 416. Study of multilayered composites through periodic homogenization and Mori–Tanaka methods 417. Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review 418. Microstructure evolution and fracture mechanism of a TiAl–Nb alloy during high-temperature tensile testing 419. Strain partitioning and damage initiation in a continuously cooled carbide free bainitic steel 420. A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness 421. Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution 422. Numerical investigation of thermomechanical response of multiscale porous ultra-High temperature ceramics 423. Computational fluid dynamics (CFD), artificial neural network (ANN) and genetic algorithm (GA) as a hybrid method for the analysis and optimization of micro … 424. Interference effect on tsunami generation by segmented seafloor deformations 425. Design and dynamic performance of a concentrated photovoltaic system with vapor chambers cooling 426. Generation and dynamics of soliton and soliton molecules from a VSe2/GO-based fiber laser 427. Effect of Cassie-Baxter versus Wenzel states on ice adhesion: A fracture toughness approach 428. Fuzzy inference system application for oil-water flow patterns identification 429. Architectural characteristics of different configurations based on new geometric determinations for the conoid 430. Effect of pipeline surface roughness on peak impact forces caused by hydrodynamic submarine mudflow 431. Systems Biology 432. A review of behavioral methods for the evaluation of cognitive performance in animal models: Current techniques and links to human cognition 433. A solution method for free vibration of intact and cracked polygonal thin plates using the Ritz method and Jacobi polynomials 434. Local asymptotic stability of a system of integro-differential equations describing clonal evolution of a self-renewing cell population under mutation 435. Parametric study of bow slamming for a KRISO container ship 436. QCD factorization and quantum mechanics 437. Numerical simulation for hydrocarbon production analysis considering Pre-Darcy flow in fractured porous media 438. A Case Study: Sediment Erosion in Francis Turbines Operated at the San Francisco Hydropower Plant in Ecuador 439. Dripping instability of a two-dimensional liquid film under an inclined plate 440. Bimetallic CoFe-MOF@ Ti3C2Tx MXene derived composites for broadband microwave absorption 441. Investigations into the drying kinetics of biomass in a fluidized bed dryer using electrostatic sensing and digital imaging techniques 442. Machine-learning-driven on-demand design of phononic beams 443. Modelling stress-induced permeability alterations in sandstones using CT scan-based representations of the pore space morphology 444. Energy minimizers for an asymptotic MEMS model with heterogeneous dielectric properties 445. Experimental and numerical studies on non-equilibrium gaseous solvent dissolution in heavy oil: A continuum-scale approach based on bubble-scale dissolution … 446. A specialized review on outlook of future Cyber-Physical Power System (CPPS) testbeds for securing electric power grid 447. Optimization of physico-chemical and membrane filtration processes to remove high molecular weight polymers from produced water in enhanced oil recovery … 448. Magnetoresponsive biocomposite hydrogels comprising gelatin and valine based magnetic ionic liquid surfactant as controlled release nanocarrier for drug … 449. Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities 450. New poly (lactic acid) composites produced from coffee beverage wastes 451. Characterizing alternating bubbles emerging from two interacting vertical gas jets in a liquid 452. Electrical properties of ZnO films implanted with rare earth and their relationship with structural and optical parameters 453. Cooling effect of droplet impacting on heated solid surface 454. A review on the transmission of COVID-19 based on cough/sneeze/breath flows 455. Multi-Hit Impact Resistance of Masonry Walls Under Large Mass 456. Nucleation and growth in solution synthesis of nanostructures–From fundamentals to advanced applications 457. A numerical study of the effects of cathode geometry on tungsten inert gas type electric arcs 458. Performance Analysis of a Neuro-Fuzzy Algorithm in Human-Centered and Non-invasive BCI 459. TINYV3RSE: The DART Vision-Based Navigation Test-bench 460. The case for a common software library and a set of enumerated benchmark problems in computer-aided molecular design 461. Nonlinear Photonics 462. Modelling density of pure and binary mixtures of normal alkanes: Comparison of hybrid soft computing techniques, gene expression programming, and equations of … 463. Modeling SARS-CoV-2: mitigation interventions and increased mobility events 464. Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test 465. Properties of Turbulence 466. Handling Neumann and Robin boundary conditions in a fictitious domain volume penalization framework 467. CFD-PBE coupled model for size-driven segregation in polydisperse granular flows 468. Effect of Self-Induced Body Vibrations on Thrust Generation in Bio-inspired Flying Robots 469. Cómo coadyuvan los modelos matemáticos a entender y combatir a la COVID-19 470. Control of transients in drinking water networks 471. Constitutional Provision in Protecting and Managing Indigenous Knowledge Systems: A Case From Rakhain Community in Bangladesh 472. A survey on Hilbert-Huang transform: Evolution, challenges and solutions 473. Modelling Thermal Conduction in Polydispersed and Sintered Nanoparticle Aggregates 474. Robust analysis of phylogenetic tree space 475. A hele-shaw limit without monotonicity 476. Loop-free tensor networks for high-energy physics 477. Systems analysis of the mechanisms governing the cardiovascular response to changes in posture and in peripheral demand during exercise 478. Wall-modeled large eddy simulations of a turbulent boundary layer over the Boeing speed bump at ReL = 2 million 479. Working Condition Monitoring and Virtual Simulation Method 480. Detailed DFT/MD simulation, surface analysis and electrochemical computer explorations of aldehyde derivatives for mild steel in 1.0 M HCl 481. Nonlinear size-dependent bending and forced vibration of internal flow-inducing pre-and post-buckled FG nanotubes 482. A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly (lactic acid) and poly (lactic acid) hybrid composites 483. Enhancing CO 2 photoreduction over ZIF-based reticular materials by morphology control of Au plasmonic nanoparticles 484. Electrospun polystyrene/graphene oxide fibers applied to the remediation of dye wastewater 485. Bone Ingrowth Around an Uncemented Femoral Implant Using Mechanoregulatory Algorithm: A Multiscale Finite Element Analysis 486. The influence of inflow swirls on phases separation in a Venturi tube 487. Permeability Decline by Clay Fines Migration around a Low‐Salinity Fluid Injection Well 488. Modeling of gas viscosity at high pressure-high temperature conditions: Integrating radial basis function neural network with evolutionary algorithms 489. A parallel cell-centered adaptive level set framework for efficient simulation of two-phase flows with subcycling and non-subcycling 490. Formation process of zirconia nanotubes and porous structures and model of oxygen bubble growth 491. A computational framework for rheologically complex thermo-visco-elastic materials 492. Unequal impact and spatial aggregation distort covid-19 growth rates 493. Drop Impact Dynamics: Impact Force and Stress Distributions 494. Indexed bibliography of genetic algorithms in physical sciences 495. Fully implicit two-phase VT-flash compositional flow simulation enhanced by multilayer nonlinear eliminationinterfacial phenomena Topics of Presentations