Past Papers Chemical Engineering Materials

Guess Paper 1: Chemical Engineering Materials Fall – 2020 Past Papers

University Name – Confidential

Time Allowed: 3 hours

Total Marks:    70, Passing Marks (35)

Q.1 Attempt the following MCQs: 7*2=14
1- Which of the following material has maximum ductility?
A: Mild steel B: Copper C: Nickel D: Aluminium
2- Shock resisting steels should have _________.
A: low wear resistance B: low hardness C: low tensile strength D: toughness
3- Cast iron is a ____. A: ductile material B: malleable material C: brittle material D: tough material
4- Connecting rod is, usually, made from _________.
A: low carbon steel B: high carbon steel C: medium carbon steel D: high speed steel
5- The hardness is the property of a material due to which it __________.
A: can be drawn into wires B: breaks with little permanent distortion C: can be rolled or hammered into thin sheets D: can cut another metal
6- The percentage of carbon in cast iron varies from ____________.
A: 0.1 to 0.5 B: 0.5 to 1 C: 1 to 1.7 D: 1.7 to 4.5
7- Nickel when added to copper improves______________.

A: Machinability B: Hardness C: Hardness and strength D: Strength and ductility.

Question No: 02 7*2=14
A- Define stress and strain also mention its units. Explain different types of stress and strain.
B- What are applications of stress and strain in chemical engineering design?
Question No: 03 7*2=14
A- What is an alloy? Discuss different types of alloys.
B- Explain in detail the alloys of Copper and aluminum.
Question No: 04 7*2=14
A- Explain the synthesis of Teflon.
B- What are the applications of PTEF and PVC?
Question No: 05 7*2=14
A- What do you know about the special material of construction?
B- Why we study the physical, mechanical, and thermal properties of the material?
Question No: 06 7*2=14
A- What is corrosion? What are the causes of corrosion?
B- Discuss the nature and rate of corrosion briefly.
Question No: 07 7*2=14
A- Discuss different types of corrosion.
B- How corrosion can be controlled?
Question No: 08 Attempt only two questions. 7*2=14
A- Explain cathodic protection for metallic corrosion.
B- Explain anodic protection of cast iron material.
C- What are the causes and effects of stress corrosion?

Guess Paper 2: Chemical Engineering Materials Spring – 2019 Past Papers

University Name – Confidential

Time Allowed: 3 hours

Total Marks:    70, Passing Marks (35)

Q.1 Attempt the following MCQs: 7*2=14
i. Presence of nickel in steel improves its______________. A: corrosion resistance B: cutting ability C: wear resistance D: all (a), (b) and (c).
ii. Hammers and railway rails are normally made of ____________. A: mild steel B: dead mild steel C: medium carbon steel D:high carbon steel.
iii. Coke oven regenerators are made of __________ bricks. A: fire clay B: silica C: low thermal conductivity D: high electrical conductivity
iv. Shock resisting steels should possess high ___________. A: hardness B: toughness C: tensile strength D: wear resistance.
v. The purpose of nitriding the steel is to ________________.A: harden its surface B: soften its surface C: improve its reliability. D: none of these.
vi. The main purpose of galvanising iron sheets is to _______________. A: harden the surface B: increase its glossiness and lustre. C: prevent the action of water D: prevent the action of oxygen
vii. The behavior of visco-elastic material is time-dependent. This behaviour is common in __________ materials. A: non-crystalline solid B: crystalline C: rubbery D: non-crystalline organic polymeric

Q: 02 A. Define Stainless steel. Give three examples.
B. Write differences between iron and steel.

Q: 03 A. Explain Cathodic and anodic protection.
B. Define Physical and chemical properties of Polyolefins.

Q: 04 A. Define Corrosion as an electrochemical reaction.
B. Explain types of corrosion with examples.
Q: 05 A. What is stress corrosion? Give two examples.
B. Explain Polytetra fluoro ethylene(PTFE) glass.

Q: 06 A. What are alloys? How they promote mechanical strength?
B. Write the definition of stress and strength. Also, classify the type of stress.

Q: 07 Write short notes on any two of the following: 7+7=14

A. Describe the coating and its advantages.
B. Explain cracking and fatigue corrosion.
C. Define nickel and its mechanical properties.

Prof.Fazal Rehman Shamil (Available for Professional Discussions)
1. Message on Facebook page for discussions,
2. Video lectures on Youtube
3. Email is only for Advertisement/business enquiries.