What does OHS stand for?
A) Office Health & Safety
B) Organizational Health & Safety
C) Occupational Health & Safety
D) Operational Health & Safety
Answer: C
Which organization sets international standards for occupational health and safety?
A) WHO (World Health Organization)
B) ILO (International Labour Organization)
C) OSHA (Occupational Safety and Health Administration)
D) CDC (Centers for Disease Control and Prevention)
Answer: B
What is the primary goal of occupational health and safety programs in workplaces?
A) Maximizing productivity
B) Minimizing employee benefits
C) Ensuring workplace safety and health
D) Reducing quality of work
Answer: C
Which type of hazard is associated with improper lifting techniques and repetitive motions?
A) Chemical hazard
B) Biological hazard
C) Physical hazard
D) Ergonomic hazard
Answer: D
What is the purpose of conducting a job hazard analysis (JHA) in occupational safety?
A) To increase workplace hazards
B) To identify and mitigate workplace hazards
C) To improve worker efficiency
D) To ignore safety measures
Answer: B
Which regulatory agency is responsible for workplace safety and health in the United States?
A) EPA (Environmental Protection Agency)
B) OSHA (Occupational Safety and Health Administration)
C) FDA (Food and Drug Administration)
D) NIOSH (National Institute for Occupational Safety and Health)
Answer: B
What does PPE stand for in the context of workplace safety?
A) Personal Production Equipment
B) Personal Physical Equipment
C) Personal Protective Equipment
D) Personnel Protection Environment
Answer: C
Which type of fire extinguisher is suitable for electrical fires?
A) Class A
B) Class B
C) Class C
D) Class D
Answer: C
What does MSDS stand for in the context of chemical safety?
A) Material Safety Data Sheets
B) Management Safety Data Sheets
C) Manufacturing Safety Data Sheets
D) Material Standards Data Sheets
Answer: A
Which term describes the level of exposure to a chemical, physical, or biological agent that is considered safe for most workers?
A) Tolerable limit
B) Permissible exposure limit (PEL)
C) Maximum exposure limit
D) Hazardous concentration
Answer: B
What is the purpose of conducting safety audits in occupational health and safety management?
A) To increase workplace accidents
B) To identify unsafe conditions and practices
C) To ignore safety measures
D) To improve workplace hazards
Answer: B
Which term describes a condition caused by prolonged exposure to ergonomic hazards, such as repetitive tasks or improper posture?
A) Noise-induced hearing loss
B) Cumulative trauma disorder
C) Chemical poisoning
D) Respiratory disease
Answer: B
What is the primary purpose of conducting safety training programs in workplaces?
A) To reduce workplace hazards
B) To increase workplace hazards
C) To increase workplace accidents
D) To improve workplace hazards
Answer: A
Which type of hazard is associated with working in confined spaces?
A) Biological hazard
B) Physical hazard
C) Chemical hazard
D) Atmospheric hazard
Answer: D
What does the acronym HAZWOPER stand for in occupational safety and health?
A) Hazardous Work Operations and Planning Emergency Response
B) Hazardous Waste Operations and Emergency Response
C) Health and Safety in Workplace Operations and Emergency Response
D) Health and Safety of Workers in Emergency Response
Answer: B
Which term describes the process of systematically identifying workplace hazards and assessing risks associated with them?
A) Safety inspection
B) Risk assessment
C) Incident investigation
D) Accident prevention
Answer: B
What is the primary goal of an ergonomic assessment in workplace safety?
A) To increase workplace hazards
B) To identify and mitigate ergonomic risks
C) To ignore safety measures
D) To improve workplace hazards
Answer: B
Which type of hazard is associated with exposure to harmful substances through inhalation, ingestion, or skin contact?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Ergonomic hazard
Answer: B
What does the acronym CPR stand for in emergency response training?
A) Cardiovascular Pulmonary Resuscitation
B) Cardio Pulmonary Rescue
C) Cardiac Pulmonary Resuscitation
D) Cardiopulmonary Resuscitation
Answer: D
Which term describes a precautionary measure taken to prevent fires in the workplace?
A) Fire planning
B) Fire monitoring
C) Fire prevention
D) Fire prediction
Answer: C
What is the primary purpose of a safety data sheet (SDS) in occupational safety?
A) To ignore safety measures
B) To improve workplace hazards
C) To increase workplace hazards
D) To provide comprehensive information about hazardous chemicals
Answer: D
Which type of hazard is associated with excessive noise levels in the workplace?
A) Biological hazard
B) Physical hazard
C) Chemical hazard
D) Ergonomic hazard
Answer: B
What does the acronym OHSAS stand for in occupational health and safety management systems?
A) Occupational Health and Safety Accreditation Standards
B) Occupational Health and Safety Assessment Series
C) Operational Health and Safety Accreditation Series
D) Occupational Health and Safety Action Standards
Answer: B
Which regulatory requirement mandates employers to provide a safe and healthy workplace for their employees?
A) International Safety Regulations (ISR)
B) Workplace Safety Act (WSA)
C) Occupational Safety and Health Act (OSHA)
D) Health and Safety Executive (HSE)
Answer: C
What is the primary goal of hazard communication programs in occupational health and safety?
A) To ignore safety measures
B) To increase workplace hazards
C) To improve workplace hazards
D) To inform employees about chemical hazards and safe handling procedures
Answer: D
Which term describes the process of controlling workplace hazards through engineering controls, administrative controls, or personal protective equipment (PPE)?
A) Hazard elimination
B) Hazard mitigation
C) Hazard identification
D) Hazard creation
Answer: B
What is the primary purpose of emergency response planning in occupational safety?
A) To increase workplace hazards
B) To ignore safety measures
C) To improve workplace hazards
D) To prepare for emergencies and minimize their impact on workers and the environment
Answer: D
Which term describes the process of investigating incidents to determine their causes and prevent recurrence?
A) Safety inspection
B) Risk assessment
C) Incident investigation
D) Accident prevention
Answer: C
What does the acronym LOTO stand for in occupational safety?
A) Lockout Tagout
B) Let Out Turn On
C) Log Out Tag On
D) Leave On Tag Off
Answer: A
Which term describes the process of systematically managing occupational health and safety risks in the workplace?
A) Safety inspection
B) Risk assessment
C) Incident investigation
D) Accident prevention
Answer: B
What is the primary purpose of a safety committee in workplaces?
A) To promote workplace hazards
B) To improve workplace hazards
C) To ignore safety measures
D) To enhance employee involvement in safety and health initiatives
Answer: D
Which type of hazard is associated with exposure to infectious agents such as bacteria and viruses?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Ergonomic hazard
Answer: CWhat does the acronym WHMIS stand for in workplace safety?
A) Workplace Hazardous Materials Information System
B) Workplace Health Management Information System
C) Workplace Hazard Management Information System
D) Workplace Health Monitoring Information System
Answer: A
Which type of hazard is associated with exposure to asbestos fibers?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Radiation hazard
Answer: B
What is the primary purpose of conducting ergonomic assessments in workplaces?
A) To increase workplace hazards
B) To identify and mitigate ergonomic risks
C) To ignore safety measures
D) To improve workplace hazards
Answer: B
Which type of hazard is associated with exposure to ionizing radiation?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Radiological hazard
Answer: D
What is the primary goal of conducting toolbox talks in occupational safety?
A) To increase workplace hazards
B) To ignore safety measures
C) To improve workplace hazards
D) To facilitate informal safety discussions and promote safety awareness among workers
Answer: D
Which term describes a proactive approach to preventing workplace injuries and illnesses through identifying and eliminating hazards before they cause harm?
A) Reactive safety
B) Safety planning
C) Prevention through design
D) Incident investigation
Answer: C
What does the acronym HSE stand for in occupational health and safety?
A) Hazard and Safety Environment
B) Health and Safety Executive
C) Health and Safety Evaluation
D) Hazardous Safety Evaluation
Answer: B
Which type of hazard is associated with slippery floors and uneven surfaces in the workplace?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Ergonomic hazard
Answer: A
What is the primary goal of a safety culture in organizations?
A) To ignore safety measures
B) To promote workplace hazards
C) To improve workplace hazards
D) To prioritize safety as a core value and encourage safe behaviors among employees
Answer: D
Which term describes the process of identifying and prioritizing hazards based on their severity and likelihood of occurrence?
A) Risk control
B) Hazard assessment
C) Safety planning
D) Incident investigation
Answer: B
What is the primary purpose of a safety management system (SMS) in occupational health and safety?
A) To increase workplace hazards
B) To ignore safety measures
C) To improve workplace hazards
D) To establish policies, procedures, and processes to manage safety risks effectively
Answer: D
Which type of hazard is associated with exposure to hazardous chemicals through skin contact or absorption?
A) Physical hazard
B) Chemical hazard
C) Biological hazard
D) Ergonomic hazard
Answer: B
What is the primary goal of conducting emergency drills in workplaces?
A) To increase workplace hazards
B) To ignore safety measures
C) To improve workplace hazards
D) To ensure that employees are prepared to respond effectively to emergencies
Answer: D
Which term describes the process of removing or isolating hazards to prevent exposure to them?
A) Hazard elimination
B) Hazard mitigation
C) Hazard identification
D) Hazard creation
Answer: A
What is the primary purpose of a safety incentive program in workplaces?
A) To increase workplace hazards
B) To improve workplace hazards
C) To ignore safety measures
D) To motivate employees to adhere to safety rules and practices by offering rewards or recognition
Answer: D
Which regulatory agency is responsible for promoting safe and healthy workplaces in Canada?
A) OSHA (Occupational Safety and Health Administration)
B) HSE (Health and Safety Executive)
C) WHS (Workplace Health and Safety)
D) CCOHS (Canadian Centre for Occupational Health and Safety)
Answer: D
What does the acronym RSI stand for in occupational health and safety?
A) Repetitive Strain Injury
B) Respiratory System Irritation
C) Radiological Safety Information
D) Risky Safety Initiative
Answer: A