Research Area/ Research Interest: smart materials and structures in Electrical Engineering
Research Paper Topics for: Masters and PhD Thesis and publication
- Computational Analysis of Smart Magneto-Electro-Elastic Materials and Structures: Review and Classification.
- Smart materials and their application in robotic hand systems: A state of the art
- Intelligent materials and structures
- A wind-induced negative damping method to achieve high-energy orbit of a nonlinear vibration energy harvester
- Timber moisture detection using wavelet packet decomposition and convolutional neural netwo
- Application of smart materials in civil engineering: A review
- Smart materials for microrobots
- Smart polyimide with recovery stress at the level of high temperature shape memory alloys
- Screen-printed flexible negative temperature coefficient temperature sensor based on polyvinyl chloride/carbon black composites
- Electrothermal shape memory behavior and recovery force of four-dimensional printed continuous carbon fiber/polylactic acid composite
- A Case Study of Combined Application of Smart Materials in a Thermal Energy Harvester with Vibrating Action
- A hyperelastic porous media framework for ionic polymer-metal composite actuators and sensors: thermodynamically consistent formulation and …
- Bio-inspired soft bistable actuator with dual actuations
- Influence of mechanical layout of shape memory alloy damping inerter (SDI) systems for vibration control
- Damage detection in large composite stiffened panels based on a novel SHM building block philosophy
- Multiphase lattice metamaterials with enhanced mechanical performance
- Influence of clay-based additive on sedimentation stability of magnetorheological fluid
- Paper and carbon ink enabled low-cost, eco-friendly, flexible, multifunctional pressure and humidity sensors
- Equivalent capacitor of polyvinylidene fluoride sensor and its influence on impact load measurement
- Actuator placement optimization for guided waves based structural health monitoring using fibre Bragg grating sensors
- A novel piezoelectric actuated 2-DOF joint for underwater manipulator: design, simulation, and experimental investigation
- Lamb wave based damage detection in metallic plates using multi-headed 1-dimensional convolutional neural network
- Effects of installation position of fin-shaped rods on wind-induced vibration and energy harvesting of aeroelastic energy converter
- Design of low-frequency broadband flextensional transducers based on combined particle swarm optimization and finite element method
- Surface acoustic device for high response NO2 gas sensor using p-phenylenediamine-reduced graphene oxide nanocomposite coated on langasite
- Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers
- Fabrication, characterization and analytical modeling of gradient auxetic closed cell foams
- Monodisperse semiconducting poly (N-methylaniline) microspheres and their electrorheological response
- A wide band nonlinear dual piezoelectric cantilever energy harvester coupled by origami
- Soft flexible conductive CNT nanocomposites for ECG monitoring
- An SECE array of piezoelectric energy harvesting
- A novel mechanical metamaterial with tailorable Poisson’s ratio and thermal expansion based on a chiral torsion unit
- Development of a magnetorheological isolator with variable damping and variable stiffness for broadband vibration suppression
- Modeling and analysis of bending pneumatic artificial muscle with multi-degree of freedom
- Boundary layer state detection using piezoelectric sensors
- Active and passive multicycle actuation characteristics of shape memory alloy-based adaptive composite structures
- Construction, modeling and experiment of a resonant-type piezoelectric impact motor based on inertial drive mechanism
- Effect of base oil lubrication properties on magnetorheological fluids
- Analytical and numerical study on the cyclic behavior of buckling-restrained SMA-based self-centering damper
- Investigation of surface textured sensing skin for fatigue crack localization and quantification
- Microsphere structure application for supercapacitor in situ temperature monitoring
- A comprehensive test method for measuring actuation performance of McKibben artificial muscles
- Highly stretchable and sensitive strain sensor based on Ti3C2-coated electrospinning TPU film for human motion detection
- Reconfigurable laminates enable multifunctional robotic building blocks
- Thermal design and analysis of a flexible solar array system based on shape memory polymer composites
- Implementation of the surface thickness on additively manufactured parts for estimation of the loading location
- Significant improving magnetoelectric sensors performance based on optimized magnetoelectric composites via heat treatment
- Multi-modal commutative dynamics in semi-crystalline polymers undergoing multiple shape memory behavior
- Electrical modeling of cylindrical dielectric elastomer transducers
- A nonlinear M-shaped tri-directional piezoelectric energy harvester
- Seismic mitigation performance of periodic foundations with inertial amplification mechanism considering superstructure-foundation interaction
- An optimized data fusion strategy for structural damage assessment using electromechanical impedance
- A dual-mode tactile hardness sensor for intraoperative tumor detection and tactile imaging in robot-assisted minimally invasive surgery
- Control of rejection frequency and density of output spectrum by programming nonuniform two channels with ternary fluidic system
- Green nanoarchitectonics with PEDOT: PSS–gelatin composite for moisture-responsive actuator and generator
- TMP origami jumping mechanism with nonlinear stiffness
- A study of mechanoelectrical transduction behavior in polyvinyl chloride (PVC) gel as smart sensors
- Unconventional deformation and sound absorption properties of anisotropic magnetorheological elastomers
- Origami-based adjustable sound-absorbing metamaterial
- Smart cities built with smart materials
- Resistivity-induced coupling between voltage distribution and vibrations in dielectric elastomers
- A 3D multidirectional piezoelectric energy harvester using rope-driven mechanism for low frequency and ultralow intensity vibration environment
- Optimal tuning of SMA inerter for simultaneous wind induced vibration control of high-rise building and energy harvesting
- Active feedforward control of flexural waves in an Acoustic Black Hole terminated beam
- An asymmetric magnetic-coupled bending-torsion piezoelectric energy harvester: modeling and experimental investigation
- Multi-resonant metamaterials based on self-sensing piezoelectric patches and digital circuits for broadband isolation of elastic wave transmission
- Water-responsive tough 1D hydrogel with programmable deformations for actuators and chemical sensors
- Development of a novel magnetorheological brake with zigzag magnetic flux path
- Multivariable modelling of intelligent flexible mechanical structures using smart materials with FEM, Euler-Bernoulli beam theory, state space & multi-sensor data …
- Novel properties of multi-poled piezoelectric network structures
- Lamb wave damage severity estimation using ensemble-based machine learning method with separate model network
- Modelling of minor hysteresis loop of shape memory alloy wire actuator and its application in self-sensing
- Highly stretchable and sensitive strain sensor based on liquid metal composite for wearable sign language communication device
- Traveling surface undulation on a Ni-Mn-Ga single crystal element
- Influence of vehicle body vibration induced by road excitation on the performance of a vehicle-mounted piezoelectric-electromagnetic hybrid energy harvester
- Bolt looseness detection using SH guided wave and wave energy transmission
- Smart polymer integrated cork composites for enhanced vibration damping properties
- Structural parameter study of dual transducers-type ultrasonic levitation-based transportation system
- A two-range tactile sensor integrated in three-layer elastomer based on FBG
- A NEW TREND IN THE CREATION OF SMART MATERIALS: APPLICATION OF ELECTROCHEMICAL TECHNOLOGIES
- Fatigue tests of superelastic NiTi wires: an analysis using factorial design in single cantilever bending
- Smart Materials Enabled with Artificial Intelligence for Healthcare Wearables
- Extracting piezoresistive response of self-sensing cementitious composites under temperature effect via Bayesian blind source separation
- Theoretical investigation and experiment of a disc-shaped triboelectric energy harvester with a magnetic bistable mechanism
- Modeling the one-way and two-way shape memory effects of semi-crystalline polymers
- Polydopamine–cellulose nanofiber composite for flexible electrode material
- Modeling and experimental validation of thin, tightly rolled dielectric elastomer actuators
- Origami-based auxetic tunable Helmholtz resonator for noise control
- Performance evaluation of self-healable torque transmission mechanism using phase change of low-melting-point-metal and application to robot joints
- Cyclic behavior and deformation mechanism of superelastic SMA U-shaped dampers under in-plane and out-of-plane loadings
- Experiments and modeling of variable camber guide vane embedded with shape memory alloy plate
- An autonomous switch based on a rotating magnet driven by magnetic launchers
- Adaptronics-Smart Structures and Materials
- Synchronous electric charge and induced current extraction (SECICE): a unified nonlinear technique combining piezoelectric and electromagnetic harvesting
- Motor unit buckling in variable recruitment fluidic artificial muscle bundles: implications and mitigations
- A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers
- Rational Fabrication of Crystalline Smart Materials for Rapid Detection and Efficient Removal of Ozone
- Brillouin-zone characterization of piezoelectric material intrinsic energy-harvesting availability
- Stimuli-responsive polydopamine-based smart materials
- Gas Foil Bearing Technology Enhanced with Smart Materials
- “Smart” Materials Based on Cellulose Nanoparticles
- Automation and manufacturing of smart materials in Additive Manufacturing technologies using Internet of Things towards the adoption of Industry 4.0
- A critical review on multifunctional smart materials ‘nanographene’emerging avenue: nano-imaging and biosensor applications
- A Smart Controllable SMA-Based Tourniquet
- Numerical and experimental analysis on the helicopter rotor dynamic load controlled by the actively trailing edge flap
- Piezoelectric metastructures for simultaneous broadband energy harvesting and vibration suppression of traveling waves
- Piezoelectric materials for energy harvesting and sensing applications: Roadmap for future smart materials
- Artificial intelligence-enabled smart mechanical metamaterials: advent and future trends
- An embeddable spherical smart aggregate for monitoring concrete hydration in very early age based on electromechanical impedance method
- 3D printing biomimetic materials and structures for biomedical applications
- Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications
- Seismic Fragility Curve Development of Frames with BRB’s Equipped with Smart Materials subjected to Mainshock-Aftershock Ground Motion
- BIOMEDICAL HEALTH MONITORING USING SENSOR-ACTUATION SYSTEM OF SMART MATERIALS
- A Lumped Parameter Electro-Mechanical-Fluid Coupling Model for an Oscillating Beam in Fluids
- Mechanical properties improvement of shape memory polymers by designing the microstructure of multi-phase heterogeneous materials
- Smart materials-integrated sensor technologies for COVID-19 diagnosis
- Adaptive Approximation-Based Feedback Linearization Control for a Nonlinear Smart Thin Plate
- Nano and micro architectured cues as smart materials to mitigate recalcitrant pharmaceutical pollutants from wastewater
- Dynamic and wave propagation analysis of periodic smart beams coupled with resonant shunt circuits: Passive property modulation
- Membrane smart metamaterials for unidirectional wave propagation problems
- Finite element analysis assisted improvement of ionic polymer metal composite efficiency for micropump of 3d bioprinter
- Stretchable Supercapacitors: From Materials and Structures to Devices
- Transformation of acoustic energy into electrical energy in a smart window: Model and investigation
- Behaviour of Smart Steel Column‐Beam Connection Under Blast Loading
- Role of smart materials and digital twin (DT) for the adoption of electric vehicles in India
- End-to-end design of a robust attitude control and vibration suppression system for large space smart structures
- Smart polymers for microscale machines
- Smart materials in cardiovascular implants: Shape memory alloys and shape memory polymers
- Behavioral Modeling and Experimental Verification of a Smart Servomotor Used in a Thermal Control Louver of a Satellite Using Dynamic Neural Network
- Magnetorheological elastomers—An underestimated class of soft actuator materials
- APPLICATION OF ELECTROCONDUCTING COMPOSITE MATERIALS FOR ADDITIONAL DAMPING OF SMART SYSTEMS BASED ON PIEZOELEMENTS
- Machine learning-assisted modeling of composite materials and structures: a review
- Applications and Metrology at Nanometer Scale 1: Smart Materials, Electromagnetic Waves and Uncertainties
- Effect of viscoelasticity on the nonlinear dynamic behavior of dielectric elastomer minimum energy structures
- Smart Photonic sensors for materials and structures assessment
- Tailoring Structure-Borne Traveling Waves in Targeted Areas of a Two-Dimensional Plate for Particle Motion Applications
- Multiphysics cross-section analysis of smart beams
- Lamb wave imaging with actuator network for damage quantification in aluminum plate structures
- Development and characterization of shape memory polymers for non-invasive biomedical applications
- Polyurethane as smart biocoatings: Effects of hard segments on phase structures and properties
- Poly (N-isopropylacrylamide)-based smart hydrogels: Design, properties and applications
- Mechxels: A Preliminary Exploration of Leveraging Bistability for Text and Image Display
- Designing with Smart Materials. Talking Products
- Materials design by synthetic biology
- Functionally graded materials beams subjected to bilateral constraints: Structural instability and material topology
- An analysis of the methods and materials for 4-dimensional printing
- Effect of Supporting Boundary Conditions on the Generation Characteristics of the Piezoelectric Cylindrical Shell Wind Energy Harvesting Flag
- Photoluminescence and piezoelectric behaviour of Yb2Sn2O7 pyrochlore based multifunctional smart advanced materials and the influence of Lu3+ and Eu3+
- Self‐Healing Materials in Robotics
- Nano‐metal oxide fillers in thermo‐responsive polycaprolactone‐based polymer nanocomposites smart materials: Impact on thermo‐mechanical, and shape memory
- Towards safe and sustainable innovation in nanotechnology: State-of-play for smart nanomaterials
- Porosity effect on the nonlinear deflection of functionally graded magneto-electro-elastic smart shells under combined loading
- Cancelation of acoustic scattering from a smart hybrid ERF/PZT-based double‐wall composite spherical shell structure
- Theoretical and experimental investigations on modified LQ terminal control scheme of piezo-actuated compliant structures in finite time
- Hydration-induced reversible deformation of biological materials
- A microstructural-based approach to model magneto-viscoelastic materials at finite strains
- A nonlinear dynamic model of magnetorheological elastomers in magnetic fields based on fractional viscoelasticity
- Electrical Self-Sensing of Pulsed Laser Ablation in Nanofiller-Modified Composites
- Design of a Lightweight Shape Memory Alloy Stroke-Amplification and Locking System in a Transradial Prosthetic Arm
- Passive control of instability regions by means of piezoceramic elements
- Stress analysis of smart composite plate structures
- Development and testing of an active trailing edge morphing demonstrator for a rotary wing
- Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019
- A Novel Flexible Bio-Inspired Pneumatic Valve Adapter for Soft Robotic Vasculature
- Active Control in Mechanical Engineering: Proceedings of the MV2 Convention on Active Control in Mechanical Engineering, Lyon, France, 22-23 October …
- Integration of SMA Wires Into the Additive Manufacturing Process Using PBF-LB/M and Long-Term Tests of the Specimens to Validate the Functional Properties
- Recent progress in the design and fabrication of multifunctional structures based on metamaterials
- A coupled efficient layerwise finite element model for free vibration analysis of smart piezo-bonded laminated shells featuring delaminations and transducer …
- Soft Pneumatic Actuators: Modeling, Control, and Application
- 4D printing of origami structures for minimally invasive surgeries using functional scaffold
- Thermo‐active Smart Electrospun Nanofibers
- Hammerstein–Wiener modelling of a magneto-rheological dampers considering the magnetization dynamics
- Development of Smart Structures for Aircraft Vibration and Noise Control
- Function Approximation Technique (FAT)-Based Nonlinear Control Strategies for Smart Thin Plates with Cubic Nonlinearities
- Development of Diketopyrrolopyrrole-Based Smart Inks by Substituting Ionic Pendants and Engineering Molecular Packing Structures
- Optoelectronic functional fibers: materials, fabrication, and application for smart textiles
- Characterization and modeling of hard magnetic particle–based magnetorheological elastomers
- Latest Advances in Development of Smart Phase Change Material for Soft Actuators
- Bio-inspired metasurface skin to enhance the performance of blue energy harvesting
- Composite materials with the coating to detect barely visible impact based on the retroreflective film
- Review of 4D Printing Materials and Reinforced Composites: Behaviors, Applications, and Challenges
- Pull-out resistance of shape memory alloy nickel-titanium ribbons embedded in silicone matrix for development of flexible composites
- Energy Harvesting from Vibration of Structures-A Brief Review
- Bioinspired Smart Materials With Externally-Stimulated Switchable Adhesion
- Design, manufacturing and applications of auxetic tubular structures: A review
- Numerical and experimental investigation of FDM fabricated re-entrant auxetic structures of ABS and PLA materials under compressive loading
- Smart, naturally-derived macromolecules for controlled drug release
- Towards a new class of stimuli-responsive polymer-based materials–Recent advances and challenges
- Analysis on enhancing the sensing behavior of ionic polymer metal composite based sensors
- Effect of Piezoelectric Thickness Ratio on the Deflection of Laminated Hybrid Composite Plates
- Impact-driven piezoelectric energy harvester using a pendulum structure for low-frequency vibration
- Numerical and Experimental Investigations of Energy Harvesting From Piezoelectric Inverted Flags
- Design of a bio-inspired soft robot for break bulk manipulation in transport engineering
- Personal thermal management by thermally conductive composites: A review
- 4D Printing of Shape Memory Materials for Textiles: Mechanism, Mathematical Modeling, and Challenges
- A variational formulation for motion design of adaptive compliant structures
- Anisotropic magnetorheological elastomers with carbonyl iron particles in natural rubber and acrylonitrile butadiene rubber: A comparative study
- Synergistic use of piezoelectric and shape memory alloy elements for vibration-based energy harvesting
- Tunable flexural wave band gaps in a prestressed elastic beam with periodic smart resonators
- 3D Printing Deformation Estimation Using Artificial Vision Strategies for Smart-Construction
- An Attempt to Topology Optimize 3D Printed Piezoelectric Composite Sensors for Highest D31 Output
- Smart covalent organic frameworks: dual channel sensors for acids and bases
- … for simulation and optimization of three-temperature anisotropic micropolar magneto-thermoviscoelastic problems in porous smart structures using NURBS and …
- Piezo electric rainfall energy harvester with proactive protection mechanism with Integrated IOT device
- Research on the Progress of Interdigital Transducer (IDT) for Structural Damage Monitoring
- Design of Bistable Laminates With Low Aspect Ratio
- Material Agency and 4D Printing
- Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering
- A Suction Cup With Tunable Stiffness Based on Shape Memory Alloy
- Soft Robotic Module Actuated by Silicone-Based Rolled Dielectric Elastomer Actuators-Modeling and Simulation
- Theoretical investigation on the buckling behavior of smart composite sandwich panels with viscoelastic core and shape memory alloy included skins
- Single-double chains micromechanical model and experimental verification of MR fluids with MWCNTs/GO composites coated ferromagnetic particles
- Plastic Receptors Developed by Imprinting Technology as Smart Polymers Imitating Natural Behavior
- Photoresponsive porous materials
- Toward smart net zero energy structures: Development of cement-based structural energy material for contact electrification driven energy harvesting and storage
- Magnetorheological Elastomer-Based Variable Stiffness Flexible Coupling for Vibration Isolation.
- A review of shape memory polymers and composites: Mechanisms, materials, and applications
- Wave propagation analysis of a rectangular sandwich composite plate with tunable magneto-rheological fluid core
- 4D Printing Dual Stimuli-Responsive Bilayer Structure Toward Multiple Shape-Shifting
- Alginate-Based Smart Materials and Their Application: Recent Advances and Perspectives
- Hardened properties and durability of large-scale 3D printed cement-based materials
- Modulation of Zirconia Ferroelectricity via Crystal Orientation of Pt Electrode
- Experimental study of a piezoelectric cantilever beam under droplet impact
- Finite Element Simulation of 3d-Printed SMA-SMP Composite Actuators
- Production and characterization of shape memory polymeric nanocomposite materials
- Droplet-Based Membranous Soft Materials
- Active polymeric reducing agent for self-healing asphalt concrete
- Modeling and parameter identification of rolled dielectric elastomer actuators for soft robots
- Smart Sustainable Cities: Principles and Future Trends
- 4D PRINTING OF TEMPERATURE DRIVEN SMART COMPOSITE MATERIALS FOR SPACE APPLICATION
- Conceptual Design of a Low-Cost Linear Actuator for Variable Span Wing Application
- Multifunctional Properties of Shape Memory Materials in Civil Engineering Applications: a State-of-the-Art Review
- Reflection of plane waves from the surface of a piezothermoelastic fiber-reinforced composite half-space
- Biaxially Morphing Droplet Shape by an Active Surface
- Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report
- Tribe–charged system search for parameter configuration of nonlinear systems with large search domains
- Modeling and analysis of an electro-pneumatic braided muscle actuator
- Large deformation mechanical modeling with bilinear stiffness for Macro-Fiber Composite bimorph based on extending mixing rules
- Improved flow-induced vibration energy harvester by using magnetic force: An experimental study
- Flexible nanogenerators for wearable electronic applications based on piezoelectric materials
- Pneumatically actuated soft gripper with bistable structures
- Current applications of smart nanotextiles and future trends
- Surface Shape Control Using a Shape Memory Actuator
- Vibration control of cantilever beam using poling tuned piezoelectric actuator
- Soft Robotic Manipulators: Designs, Actuation, Stiffness Tuning, and Sensing
- Design of functionally cooperating systems and application towards self-propulsive mini-generators
- Smart fibrous structures produced by electrospinning using the combined effect of PCL/graphene nanoplatelets
- Incommensurately modulated structures in Pb(Zr1−xSnx)O3 single crystals by x-ray diffraction
- Additive manufacturing of structural materials
- Electro-magnetic vibration behavior of smart curved micro-/nanoshells
- Energy-harvesting concrete for smart and sustainable infrastructures
- 3D printing microactuators for soft microrobots
- Novel active magnetorheological knee prosthesis presents low energy consumption during ground walking
- Nafion-based ionic-polymer-metal composites: Displacement rate analysis by changing electrode properties
- Experimental investigation on energy absorption of auxetic structures
- Self-healing polymer nanocomposite materials by Joule effect
- Contractile Pneumatic Artificial Muscle Generates Extension by Actuating an Integrated Pushrod
- Optical Fiber-Integrated Smart Structures: Towards Transparent Devices for Healthcare 4.0
- Metamaterial and Helmholtz coupled resonator for high-density acoustic energy harvesting
- Monitoring Concrete Curing by Linear and Nonlinear Ultrasonic Methods
- Reversible and non-reversible motion of NdFeB-particles in magnetorheological elastomers
- Hysteresis modeling of impact dynamics using artificial neural network
- Free, forced, and random vibrations of a beam composed of highly contrasting materials
- Experimental investigation on a flapping beam with smart material actuation for underwater application
- 4D textiles made by additive manufacturing on pre-stressed textiles—An overview
- High strength porous PLA gyroid scaffolds manufactured via fused deposition modeling for tissue-engineering applications
- Materials and technologies in road pavements-an overview
- Smart Laser‐Writable Micropatterns with Multiscale Photo/Moisture Reconstructible Structure
- 4D printing: Fundamentals, materials, applications and challenges
- An effective method for damage assessment based on limited measured locations in skeletal structures
- Fluid-structure interaction simulations for a temperature-sensitive functionally graded hydrogel-based micro-channel
- Topology optimization of shape memory polymer structures with programmable morphology
- Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report
- Medical application of biomimetic 4D printing
- Analytical and experimental study of a clamped-clamped, bistable buckled beam low-frequency PVDF vibration energy harvester
- Broadening low-frequency bandgaps in locally resonant piezoelectric metamaterials by negative capacitance
- Emerging, hybrid & smart composites
- Synthesis and characterization of novel flake-shaped carbonyl iron and water-based magnetorheological fluids using laponite and oleic acid with enhanced …
- Stacking-induced different performance of mechanochromic luminescence and room-temperature phosphorescence based on two analogous AIEgens synthesized by …
- Copper (i)–iodide cluster structures as functional and processable platform materials
- A finite element model to analyze the dynamic characteristics of galloping based piezoelectric energy harvester
- Constitutive Modeling of multi-stimuli-responsive shape memory polymers with multi-functional capabilities
- Extrapolation of AR models using cubic splines for damage progression evaluation in composite structures
- 4D Printing: Enabling Technology for Microrobotics Applications
- Auxetic Two‐Dimensional Nanostructures from DNA
- Modeling of a Bingham model of a magnetorheological damper considering stochastic uncertainties in their geometric variables
- Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling
- An optical red green blue sensor for monitoring the degradation of magnetorheological fluids in flow-recirculating high-torque clutch actuators
- Analysis of tensile behaviour of hyperelastic auxetic cellular materials with re-entrant hexagonal cells
- An improved time-varying empirical mode decomposition for structural condition assessment using limited sensors
- Photosynthesis-assisted remodeling of three-dimensional printed structures
- Characterization of nonlinear viscoelasticity of magnetorheological grease under large oscillatory shear by using Fourier transform-Chebyshev analysis
- The Benefits of Smart Nanoparticles in Dental Applications
- Mechanochromic fluorescent polymers enabled by AIE processes
- Microbial induced calcium carbonate precipitation study using Bacillus subtilis with application to self-healing concrete preparation and characterization
- Force control of electro-active polymer actuators using model-free intelligent control
- … vision and artificial intelligence algorithms to predict and design the mechanical compression response of direct ink write 3D printed foam replacement structures
- Fracture and electric‐field‐induced crack growth behavior in NBT‐6BT relaxor ferroelectrics
- Tolerable range of abdomen and waist skin temperature for heating-capable smart garments
- Electrospun Shape Memory Polymer Micro-/Nanofibers and Tailoring Their Roles for Biomedical Applications