Bending Stress due to Eccentric Loading in Both Directions MCQs
Solved MCQs on Bending Stress due to Eccentric Loading in Both Directions.
In all types of soils ______is the foundation’s minimum depth
(A). 280mm
(B). 680mm
(C). 500mm
(D). 350mm
(E). None of these
MCQ Answer: c
In the factor of safety is 3 and the ultimate load is 127.32N Determine the stress working?
(A). 42 N/m2
(B). 55 N/m2
(C). 48 N/m2
(D). 46 N/m2
(E). None of these
MCQ Answer: a
Most of the compressive force is shared by _______ In T beams
(A). Flange
(B). Web
(C). Rib
(D). Neutral axis
(E). None of these
MCQ Answer: a
Maximum _____ is less in the T beams.
(A). Shear stress
(B). Bending moment
(C). Bending stress
(D). Shear force
(E). None of these
MCQ Answer: b
The__________moment is always less than support moment in the continuous beams.
(A). Sagging
(B). Mid span
(C). Downward
(D). Upward
(E). None of these
MCQ Answer: b
For the continuous beam, lighter materials of the construction are used.
(A). True
(B). False
(C). Partially True
MCQ Answer: a
3× _________ = Volumetric strain
(A). Lateral stress
(B). Lateral strain
(C). Linear stress
(D). Linear strain
(E). None of these
MCQ Answer: d
_____ moment is developed at supports in the continuous beams.
(A). Couple
(B). Sagging
(C). Hogging
(D). Static
(E). None of these
MCQ Answer: c
What will be the minimum eccentricity for columns, As per IS 456-2000?
(A). l/400 + D/40
(B). l/500 + D/30
(C). l/450 + D/45
(D). l/250 + D/25
(E). None of these
MCQ Answer: b
What will be the value of effective length, at both ends if columns are effectively restrained against rotation and held in position?
(A). 0.6×l
(B). 0.77×l
(C). 0.65×l
(D). 0.9×l
(E). None of these
MCQ Answer: a
Reinforcement is wound spiral in a column is _________
(A). Tied column short column
(B). Spiral column
(C). Composite column
(D).
(E). None of these
MCQ Answer: b
Compressive loads carried by inclined members are ______
(A). Winch
(B). Strut
(C). Post
(D). Pedestal
(E). None of these
MCQ Answer: b
Malleability’s good example is?
(A). Lead
(B). Concrete
(C). Copper
(D). Glass
(E). None of these
CQ Answer: c
What polygonal links are called?
(A). Lateral ties
(B). Crancked bars
(C). Bent up bars
(D). Anchorage bars
(E). None of these
MCQ Answer: a
Than the least of the _________ pitch of the lateral ties should not be More
(A). 550mm
(B). 500mm
(C). 450mm
(D). 300mm
(E). None of these MCQ Answer: d
Mechanical Engineering MCQs
- Analyzing the Fixed Beam MCQs
- Analyze Indeterminate Beam MCQs
- Analyse Propped Cantilever MCQs
- Mechanical Engineering Past Papers MCQs
- Mechanical Engineer MCQs
- Mechanical Engineer MCQs Preparation
- Bending Stress due to Eccentric Loading in Both Directions MCQs
- Bending Stress due to Eccentric Loading MCQs
- Bending Stress in Unsymmetrical Sections MCQs
- Material Bending Stress MCQs
- Center of Gravity MCQs
- Combined Bending and Torsion MCQs
- Combined Stress MCQs
- Process Management MCQs
