Research Area/ Research Interest: Mechanics of solids, materials, structures and surfaces
Research Paper Topics for: Masters and PhD Thesis and publication
- Surface and interfacial anti-plane waves in micropolar solids with surface energy
- Adhesion behaviors on four special wettable surfaces: natural sources, mechanisms, fabrications and applications
- Adsorption and diffusion of oxygen on metal surfaces studied by first-principle study: A review
- Synergetic effects of surface texturing and solid lubricants to tailor friction and wear–a review
- Robust superhydrophobicity: mechanisms and strategies
- Influence of surface modification on selective CO2 adsorption: A technical review on mechanisms and methods
- Effective Strategies for Droplet Transport on Solid Surfaces
- Surface-enhanced Raman spectroscopy
- Surface integrity in metal machining-Part I: Fundamentals of surface characteristics and formation mechanisms
- In-depth gaze at the astonishing mechanical behavior of bone: A review for designing bio-inspired hierarchical metamaterials
- Polysiloxane as icephobic materials–The past, present and the future
- Structural transformations of solid electrocatalysts and photocatalysts
- A review of cadmium sorption mechanisms on soil mineral surfaces revealed from synchrotron-based X-ray absorption fine structure spectroscopy: Implications for soil …
- The effect of a pre-existing nanovoid on martensite formation and interface propagation: a phase field study
- Femtosecond Laser-Induced Periodic Surface Structures on 2D Ti-Fe Multilayer Condensates
- Protocols for synthesis of nanomaterials, polymers, and green materials as adsorbents for water treatment technologies
- Synergy between surface mechanochemistry and subsurface dissolution on wear of soda lime silica glass in basic solution
- Hydrodynamics and surface properties influence biofilm proliferation
- Functionalized construction of biochar with hierarchical pore structures and surface O-/N-containing groups for phenol adsorption
- Bioinspired Surfaces: Bioinspired Surface with Superwettability for Controllable Liquid Dynamics (Adv. Mater. Interfaces 2/2021)
- Surface and interface engineering for nanocellulosic advanced materials
- Probabilistic modeling of surface effects in nano-reinforced materials
- The Fluid Mechanics of Cleaning and Decontamination of Surfaces
- Movement pattern of an ellipsoidal nanoparticle confined between solid surfaces: Theoretical model and molecular dynamics simulation
- Mechanics of aircraft structures
- Recent progress in the design and fabrication of multifunctional structures based on metamaterials
- Nanoindentation of a half-space due to a rigid cylindrical roller based on Steigmann–Ogden surface mechanical model
- Numerical investigations of the spreading and retraction dynamics of viscous droplets impact on solid surfaces
- Carbon based materials: a review of adsorbents for inorganic and organic compounds
- Bioinspired surface with superwettability for controllable liquid dynamics
- Mechanisms of bulk and surface diffusion in metallic glasses determined from molecular dynamics simulations
- Oiling‐Out Crystallization of Beta‐Alanine on Solid Surfaces Controlled by Solvent Exchange
- Nanoscale engineering of catalytic materials for sustainable technologies
- Mechanism of chip formation and surface-defects in orthogonal cutting of soft-brittle potassium dihydrogen phosphate crystals
- Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries
- Characterisation and reactivity of oxygen species at the surface of metal oxides
- Surface integrity in metal machining-Part II: Functional performance
- Experimental study of nucleate pool boiling heat transfer improvement utilizing micro/nanoparticles porous coating on copper surfaces
- Realization of a novel morphing surface using additive manufacturing and its active control in friction
- A review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application
- Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
- Mechanical properties of 3D printed ceramic cellular materials with triply periodic minimal surface architectures
- Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance
- An overview on engineering the surface area and porosity of biochar
- Adsorbent materials for ammonium and ammonia removal: A review
- Local hot charge density regulation: Vibration-free pyroelectric nanogenerator for effectively enhancing catalysis and in-situ surface enhanced Raman scattering …
- Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries
- Applications of superhydrophobic coatings in anti-icing: Theory, mechanisms, impact factors, challenges and perspectives
- Atmospheric-pressure plasma assisted engineering of polymer surfaces: From high hydrophobicity to superhydrophilicity
- A critical review of recent research of free vibration and stability of functionally graded materials of sandwich plate
- Iron Based Core-Shell Structures as Versatile Materials: Magnetic Support and Solid Catalyst
- Mixed conductivity and the conduction mechanism of the orthorhombic CaZrO3 based materials
- … study of polymer mixtures formed by a polycation and a zwitterionic copolymer in aqueous solution and upon adsorption onto negatively charged surfaces
- 3D glass fiber cloth reinforced polymer electrolyte for solid-state lithium metal batteries
- Probing the prediction of effective properties for composite materials
- Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage
- Silicate-modified oiltea camellia shell-derived biochar: A novel and cost-effective sorbent for cadmium removal
- Adsorption of Ca (II) and K (I) on the kaolinite surface: a DFT study with an experimental verification
- Science and art of ductile grinding of brittle solids
- Unique surface patterns emerging during solidification of liquid metal alloys
- Physics of surface vibrational resonances: Pillared phononic crystals, metamaterials, and metasurfaces
- Superior pseudocapacitive storage of a novel Ni 3 Si 2/NiOOH/graphene nanostructure for an all-solid-state supercapacitor
- Understanding the relationship between the structural properties of three corrosion inhibitors and their surface protectiveness ability in different environments
- Gradient Solid Electrolyte Interphase and Lithium‐Ion Solvation Regulated by Bisfluoroacetamide for Stable Lithium Metal Batteries
- Carbon‐based materials for all‐solid‐state zinc–air batteries
- Improved elastocaloric cooling performance in gradient-structured NiTi alloy processed by localized laser surface annealing
- Osseointegration of 3D porous and solid Ti–6Al–4V implants-Narrow gap push-out testing and experimental setup considerations
- Review on biomass feedstocks, pyrolysis mechanism and physicochemical properties of biochar: State-of-the-art framework to speed up vision of circular bioeconomy
- Effects of surface structure and defect behavior on the magnetic, electrical, and photocatalytic properties of Gd-doped CeO2 nanoparticles synthesized by a simple …
- NURBS hyper-surfaces for 3D topology optimization problem
- Electro-chemo-mechanics of lithium in solid state lithium metal batteries
- Theoretical study on the adsorption mechanism of PbCl2/CdCl2 by kaolinite during municipal solid waste pyrolysis
- Special issue on advanced corrosion-resistance materials and emerging applications. The progress on antifouling organic coating: from biocide to biomimetic surface
- Triple ionic–electronic conducting oxides for next-generation electrochemical devices
- Materials for Additive Manufacturing
- Heterostructured materials: superior properties from hetero-zone interaction
- Self-ignition risk classification for coal dust layers of three coal types on a hot surface
- Variable-order fracture mechanics and its application to dynamic fracture
- Effects of molecular polarity on the adsorption and desorption behavior of asphaltene model compounds on silica surfaces
- A data-driven normal contact force model based on artificial neural network for complex contacting surfaces
- Spatial Variation of Thermokinetics and Associated Microstructural Evolution in Laser Surface Engineered IN718: Precursor to Additive Manufacturing
- Nanocellulose‐Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage
- Computation of brittle fracture propagation in strain gradient materials by the FEniCS library
- Relaxation of the Excited Rydberg States of Surface Electrons on Liquid Helium
- Fluorescent carbon dots in solid-state: From nanostructures to functional devices
- Non-reciprocal Rayleigh wave propagation in space–time modulated surface
- Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components
- Mechano-bactericidal actions of nanostructured surfaces
- Surface characteristics and wettability of superhydrophobic silanized inorganic glass coating surfaces textured with a picosecond laser
- The carbon nanotubes-based materials and their applications for organic pollutant removal: A critical review
- Propagation and attenuation of Rayleigh and pseudo surface waves in viscoelastic metamaterials
- Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface
- New insight into absorption characteristics of CO2 on the surface of calcite, dolomite, and magnesite
- Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model
- On spherical nanoinhomogeneity embedded in a half-space analyzed with Steigmann–Ogden surface and interface models
- Multifunctional Reversible Self‐Assembled Structures of Cellulose‐Derived Phase‐Change Nanocrystals
- Solid–liquid composites for soft multifunctional materials
- Bioinspired microstructured materials for optical and thermal regulation
- Insights into photoluminescence mechanisms of carbon dots: advances and perspectives
- Review of recent developments in surface nanocrystallization of metallic biomaterials
- Mechanics of free-standing inorganic and molecular 2D materials
- Solid oxide fuel cell: Decade of progress, future perspectives and challenges
- Recent developments in hybrid surface metal matrix composites produced by friction stir processing: A review
- New perspectives on the roles of nanoscale surface topography in modulating intracellular signaling
- Review on nickel-based adsorption materials for Congo red
- … Hybrid Reactive Dynamics Method with Application to the Reductive Decomposition Reaction of the TFSI and DOL Electrolyte at a Lithium–Metal Anode Surface
- Crystal face dependent intrinsic wettability of metal oxide surfaces
- All‐solid‐state supercapacitors based on yarns of Co3O4-anchored porous carbon nanofibers
- Understanding all solid-state lithium batteries through in situ transmission electron microscopy
- Insights into the Surface/Interface Modifications of Bi2MoO6: Feasible Strategies and Photocatalytic Applications
- Design of self-supporting lattices for additive manufacturing
- A multiscale simulation approach to grinding ferrous surfaces for process optimization
- On the macro-and micro-deformation mechanisms of selectively laser melted damage tolerant metallic lattice structures
- Active friction control in lubrication condition using novel metal morphing surface
- Experimental and numerical investigation on the compressive properties of interlocking blocks
- Micromechanics of machining and wear in hard and brittle materials
- Low-temperature oxidation of diethyl ether: Reactions of hot radicals across coupled potential energy surfaces
- MXenes: Two-Dimensional Building Blocks for Future Materials and Devices
- Surface and interface engineering of two-dimensional bismuth-based photocatalysts for ambient molecule activation
- Removal of natural organic matter from source water: Review on coagulants, dual coagulation, alternative coagulants, and mechanisms
- … as a low-cost material for cadmium and copper removal from aqueous solutions: Assessment of adsorption characteristics and exploration of involved mechanisms
- A detailed evaluation of surface, thermal, and flammable properties of polyamide 12/glass beads composites fabricated by multi jet fusion
- Growth of carbon nanotubes on the surface of carbon fiber using Fe–Ni bimetallic catalyst at low temperature
- Active MnO2/biochar composite for efficient As (III) removal: Insight into the mechanisms of redox transformation and adsorption
- Carbon Anode Materials: A Detailed Comparison between Na‐ion and K‐ion Batteries
- … the Location of Cd2+ in Post-synthetically Treated InP Quantum Dots Using Dynamic Nuclear Polarization 31P and 113Cd Solid-State NMR Spectroscopy
- Guest-occupiable space in the crystalline solid state: a simple rule-of-thumb for predicting occupancy
- A review of shape memory polymers and composites: Mechanisms, materials, and applications
- Structure-heat transport analysis of periodic open-cell foams to be used as catalyst carriers
- The Impact of Nanofluids on Droplet/Spray Cooling of a Heated Surface: A Critical Review
- Numerical modelling of surface morphology in selective laser melting
- Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?
- Zeolitic imidazolate framework-based nanomaterials for the capture of heavy metal ions and radionuclides: a review
- Rockburst mechanism in coal rock with structural surface and the microseismic (MS) and electromagnetic radiation (EMR) response
- Review of organic and inorganic pollutants removal by biochar and biochar-based composites
- Bridging Structural Inhomogeneity to Functionality: Pair Distribution Function Methods for Functional Materials Development
- Advances in micro milling: From tool fabrication to process outcomes
- Investigation of flow through triply periodic minimal surface-structured porous media using MRI and CFD
- Energy absorption mechanisms of nanoscopic multilayer structures under ballistic impact loading
- Structure and chemistry of the solid electrolyte interphase (SEI) on a high capacity conversion-based anode: NiO
- A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components
- Superhydrophobic self-floating TiO2-silicone composite aerogels and their air–liquid-solid triphase photocatalytic system
- Forced convection computational fluid dynamics analysis of architected and three-dimensional printable heat sinks based on triply periodic minimal surfaces
- … biochar with high specific surface area for adsorptive removal of chromium (VI) and naphthalene from water: Affecting factors, mechanisms and reusability exploration
- Application of the surface free energy method on the mechanism of low-temperature cracking of asphalt mixtures
- Why coronavirus survives longer on impermeable than porous surfaces
- Reflection of plane waves from the surface of a piezothermoelastic fiber-reinforced composite half-space
- Enhanced uranium removal from acidic wastewater by phosphonate-functionalized ordered mesoporous silica: Surface chemistry matters the most
- Isogeometric analysis for non-classical Bernoulli-Euler beam model incorporating microstructure and surface energy effects
- Ultrafast fiber laser-induced fabrication of superhydrophobic and self-cleaning metal surfaces
- Evaluation of cutting-tool coating on the surface roughness and hole dimensional tolerances during drilling of Al6061-T651 alloy
- From contact-electrification to triboelectric nanogenerators
- Effects of physicochemical properties of different base oils on friction coefficient and surface roughness in MQL milling AISI 1045
- Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
- Graphite as anode materials: Fundamental mechanism, recent progress and advances
- Post‐Synthetic Modification of Metal–Organic Frameworks Toward Applications
- Numerical evaluation of strain gradients in classical elasticity through the Boundary Element Method
- Promotion of oxygen reduction reaction on a double perovskite electrode by a water-induced surface modification
- Metal–organic framework-based enzyme biocomposites
- Design of non-assembly mechanisms: A state-of-the-art review
- Recent advances in catalytic combustion of AP-based composite solid propellants
- Films and Materials Derived from Aminomalononitrile
- First Cell Failure of Lattice Structure under Combined Loading
- A review on the recent advances in hybrid supercapacitors
- Simulation and Analysis of the Interdigital Transducers Surface Acoustic Waves Generation and Propagation in Acoustophoretic Lab-Chip
- 2 Adsorbents and adsorbent characterization
- Atomistic Insights into Lithium Storage Mechanisms in Anatase, Rutile, and Amorphous TiO2 Electrodes
- Nanotechnology-Based Antimicrobial and Antiviral Surface Coating Strategies
- Application of biochar for the remediation of polluted sediments
- Preparation of biochar and biochar composites and their application in a Fenton-like process for wastewater decontamination: A review
- Investigation of capacity fade for 18650-type lithium-ion batteries cycled in different state of charge (SoC) ranges
- Advanced solid-liquid separation for dewatering fine coal tailings by combining chemical reagents and solid bowl centrifugation
- Polarized nucleation and efficient decomposition of Li2O2 for Ti2C MXene cathode catalyst under a mixed surface condition in lithium-oxygen batteries
- Double transition metal MXene (TixTa4− xC3) 2D materials as anodes for Li-ion batteries
- Adsorption characteristics and mechanisms of Pb 2+ and Cd 2+ by a new agricultural waste–Caragana korshinskii biomass derived biochar
- Removal of heavy metals and dyes by clay-based adsorbents: From natural clays to 1D and 2D nano-composites
- Characterization and functional application of PrBa0. 5Sr0. 5Co1. 5Fe0. 5O5+ δ cathode material for IT-SOFC
- Effects of liquid film thickness and surface roughness ratio on rapid boiling of water over copper plates
- Leading edge erosion of wind turbine blades: Understanding, prevention and protection
- Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
- Atomic‐Level Charge Separation Strategies in Semiconductor‐Based Photocatalysts
- Ten years of progress in the synthesis and development of MXenes
- Structure and Formation of Amorphous Calcium Phosphate and its Role as Surface Layer of Nanocrystalline Apatite: Implications for Bone Mineralization
- Engineering the electronic structure of perovskite oxide surface with ionic liquid for enhanced oxygen reduction reaction
- Comparative study on characteristics and mechanism of phosphate adsorption on Mg/Al modified biochar
- Evolution of bio‐inspired artificial synapses: materials, structures, and mechanisms
- Recent advances of covalent organic frameworks for solid-phase microextraction
- Tuning electrochemically driven surface transformation in atomically flat LaNiO 3 thin films for enhanced water electrolysis
- Pushing the Limit of Ordered Mesoporous Materials via 2D Self‐Assembly for Energy Conversion and Storage
- Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 625
- Thermodynamics of composition dependent ligand exchange on the surfaces of colloidal indium phosphide quantum dots
- One-step green fabrication of hierarchically porous hollow carbon nanospheres (HCNSs) from raw biomass: Formation mechanisms and supercapacitor applications
- A review of charge storage in porous carbon-based supercapacitors
- Layered double hydroxides/biochar composites as adsorbents for water remediation applications: Recent trends and perspectives
- Mechanical performance of 3D printed interpenetrating phase composites with spinodal topologies
- Fat Bloom Caused by Partial De‐Oiling on Chocolate Surfaces after High‐Temperature Exposure
- Cupric oxide coating that rapidly reduces infection by SARS-CoV-2 via solids
- A colloid chemistry route for the preparation of hierarchically ordered mesoporous layered double hydroxides using surfactants as sacrificial templates
- Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
- Wood‐Derived Carbon Materials and Light‐Emitting Materials
- Boosting CO2 Electrochemical Reduction with Atomically Precise Surface Modification on Gold Nanoclusters
- Surface chemistry and structure evaluation of Mg/Al and Mg/Fe LDH derived from magnesite and dolomite in comparison to LDH obtained from chemicals
- Characterization of surface properties of chitosan/bentonite composites beads by inverse gas chromatography
- Conversion of tannery solid waste to an adsorbent for high-efficiency dye removal from tannery wastewater: A road to circular utilization
- Machine Learning-Enabled Design and Prediction of Protein Resistance on Self-Assembled Monolayers and Beyond
- Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction
- Chiral surface plasmon-enhanced chiral spectroscopy: principles and applications
- Biomass-derived biochar materials as sustainable energy sources for electrochemical energy storage devices
- Spin crossover and cooperativity in nanocrystalline [Fe (pyrazine) Pt (CN) 4] thin films deposited by matrix-assisted laser evaporation
- Structurally stabilized lithium-metal anode via surface chemistry engineering
- Numerical and experimental analysis of the structural performance of AM components built by fused filament fabrication
- Enhancement of selective adsorption of Cr species via modification of pine biomass
- Solvent molecules form surface redox mediators in situ and cocatalyze O2 reduction on Pd
- CuWO4 with CuO and Cu (OH) 2 native surface layers for H2S detection under in-field conditions
- Low‐PGM and PGM‐free catalysts for proton exchange membrane fuel cells: stability challenges and material solutions
- Insight to peroxone-Fe (III) joint conditioning-horizontal electro-dewatering process on water reduction in activated sludge: Performance and mechanisms
- Phosphorus Removal from Wastewater: The Potential Use of Biochar and the Key Controlling Factors
- Defective Structures in Metal Compounds for Energy‐Related Electrocatalysis
- Cycling mechanism of Li2MnO3: Li–CO2 batteries and commonality on oxygen redox in cathode materials
- Preparation of micro-textures on cemented carbide substrate surface by plasma-assisted laser machining to enhance the PVD tool coatings adhesion
- Finite bending of hyperelastic beams with transverse isotropy generated by longitudinal porosity
- Interaction between hexavalent chromium and biologically formed iron mineral-biochar composites: Kinetics, products and mechanisms
- Crack self-healing of thermo-responsive shape memory polymers with application to control valves, filtration, and drug delivery capsule
- Recent advances in electrocatalysts for neutral and large-current-density water electrolysis
- Mode II fracture of an MMA adhesive layer: Theory versus experiment
- Nickel sulfide-based energy storage materials for high-performance electrochemical capacitors
- The role of Ni and Co in suppressing O‐Loss in Li‐rich layered cathodes
- MOF-on-MOF hybrids: Synthesis and applications
- Self-lubricating materials for extreme temperature tribo-applications
- Energy storage mechanisms of anode materials for potassium ion batteries
- CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites
- Emergence of melanin-inspired supercapacitors
- Surface mobility in amorphous selenium and comparison with organic molecular glasses
- A perspective on single-crystal layered oxide cathodes for lithium-ion batteries
- A fractal model for capillary flow through a single tortuous capillary with roughened surfaces in fibrous porous media
- Recent Progress in Artificial Muscles for Interactive Soft Robotics
- A Survey of Modeling and Optimization Methods for Multi-Scale Heterogeneous Lattice Structures
- How Can Surface-Crystallized Glass-Ceramics Be Piezoelectric?
- Surface modifications
- Interphases, interfaces, and surfaces of active materials in rechargeable batteries and perovskite solar cells
- Nitrogen‐Doping‐Regulated Electromagnetic Wave Absorption Properties of Ultralight Three‐Dimensional Porous Reduced Graphene Oxide Aerogels
- Nature-inspired topographies on hydroxyapatite surfaces regulate stem cells behaviour
- Dual-function antibacterial surfaces to resist and kill bacteria: Painting a picture with two brushes simultaneously
- Going submicron in the precise analysis of soil structure: A FIB-SEM imaging study at nanoscale
- Jamming Skins that Control System Rigidity from the Surface
- A compressible plasticity model for pulp fibers under transverse load
- Small-scale effects on the piezopotential properties of tapered gallium nitride nanowires: The synergy between surface and flexoelectric effects
- On topology optimization of large deformation contact-aided shape morphing compliant mechanisms
- High Temperature Insulation Materials for DC Cable Insulation—Part III: Degradation and Surface Breakdown
- Multifunctional fabrics finished using electrosprayed hybrid Janus particles containing nanocatalysts
- Fabrication and tribological behavior of self-lubricating composite impregnated with synthesized inorganic hollow fullerene-like MoS2
- Engineered biochars for recovering phosphate and ammonium from wastewater: A review
- Hydrogen Storage in Carbon and Oxygen Co‐Doped Porous Boron Nitrides
- Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater
- First-principles insights into plasmon-induced catalysis
- Review on Ruddlesden–Popper perovskites as cathode for solid oxide fuel cells
- Recent progresses and applications in Laser-based surface texturing systems
- Three-dimensional phase-field modeling of mode I+ II/III failure in solids
- Recent advances in drug delivery applications of cubosomes, hexosomes, and solid lipid nanoparticles
- Surface/interface engineering of high-efficiency noble metal-free electrocatalysts for energy-related electrochemical reactions
- Recent progresses in dry gas polymeric filters
- 3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies
- Enhanced adsorptive removal of sulfamethoxazole from water using biochar derived from hydrothermal carbonization of sugarcane bagasse
- Oxygen‐Deficient Cobalt‐Based Oxides for Electrocatalytic Water Splitting
- Bonding Mechanisms in Cold Spray: Influence of Surface Oxidation During Powder Storage
- Towards Control of the Size, Composition and Surface Area of NiO Nanostructures by Sn Doping
- Strategies of Removing Residual Lithium Compounds on the Surface of Ni‐Rich Cathode Materials†
- Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties
- Hierarchical structures hydrogel evaporator and superhydrophilic water collect device for efficient solar steam evaporation
- Nano Polymorphism‐Enabled Redox Electrodes for Rechargeable Batteries
- Investigation of structural and optical properties of zirconia dioxide nanoparticles by radiation and thermal methods
- Synthesis and application of core–shell liquid metal particles: a perspective of surface engineering
- Carbon quantum dots decorated heteroatom co-doped core-shell Fe0@ POCN for degradation of tetracycline via multiply synergistic mechanisms
- Wetting of a solid surface by active matter
- Adsorption and dissociation mechanism of hydrogen sulfide on layered FeS surfaces: A dispersion-corrected DFT study
- Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
- Milling force model for aviation aluminum alloy: academic insight and perspective analysis
- Understanding molecular motion mechanism of phase change materials in mesoporous MCM-41
- Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms
- Surface defect engineering of metal oxides photocatalyst for energy application and water treatment
