1. What is the primary purpose of the Offset command in AutoCAD?
A) To create a copy of a selected object at a specified distance
B) To trim lines
C) To scale objects
D) To rotate objects
Answer: A
2. Which option is used to specify the distance for the Offset command?
A) Radius
B) Distance
C) Length
D) Trim
Answer: B
3. Can the Offset command be used on arcs and circles in AutoCAD?
A) Yes
B) No
C) Only on arcs
D) Only on circles
Answer: A
4. What happens when you offset a polyline in AutoCAD?
A) A new polyline is created parallel to the original
B) The polyline is broken into individual segments
C) The polyline is deleted
D) The polyline is converted into a spline
Answer: A
5. Can you use negative values for the Offset command in AutoCAD?
A) No
B) Yes, it offsets the object in the opposite direction
C) Yes, but it reverses the offset
D) Negative values are not allowed in AutoCAD
Answer: B
6. What is the purpose of the Array command in AutoCAD?
A) To create multiple copies of an object in a specified pattern
B) To rotate an object
C) To scale an object
D) To stretch an object
Answer: A
7. How many types of Arrays are there in AutoCAD?
A) Two
B) Three
C) Four
D) Five
Answer: B
8. Which type of Array arranges objects in rows and columns in AutoCAD?
A) Polar Array
B) Rectangular Array
C) Path Array
D) Radial Array
Answer: B
9. What does the Polar Array command do in AutoCAD?
A) Copies an object in a circular pattern around a center point
B) Creates a linear arrangement of objects
C) Offsets objects radially
D) Scales objects in a circular manner
Answer: A
10. In a Path Array, what determines the spacing of objects?
A) The length of the path
B) The distance between the base point and the end point
C) The total number of items
D) The radius of the array
Answer: A
11. Can the Array command be used on 3D objects in AutoCAD?
A) Yes, for all types of arrays
B) No, only on 2D objects
C) Yes, but only for Polar Arrays
D) Yes, but only for Rectangular Arrays
Answer: A
12. How do you set the number of items in a Polar Array in AutoCAD?
A) By specifying the total number of items
B) By adjusting the angle between items
C) Both A and B
D) By specifying the radius
Answer: C
13. Which Array type allows you to align objects along a curve in AutoCAD?
A) Rectangular Array
B) Polar Array
C) Path Array
D) Radial Array
Answer: C
14. What happens when you use the Rectangular Array command on an object in AutoCAD?
A) The object is copied in a grid pattern
B) The object is scaled
C) The object is copied in a circular pattern
D) The object is trimmed
Answer: A
15. How can you adjust the spacing between items in a Rectangular Array?
A) By changing the row and column distances
B) By setting the angle between objects
C) By modifying the radius
D) By using the Offset command
Answer: A
16. In a Polar Array, what does the ‘Fill Angle’ option control?
A) The total angle covered by the array
B) The distance between the objects
C) The rotation of individual objects
D) The radius of the array
Answer: A
17. Can you modify the number of rows and columns after creating a Rectangular Array?
A) Yes, by selecting the array and editing the properties
B) No, the array cannot be modified
C) Only the number of columns can be changed
D) Only the number of rows can be changed
Answer: A
18. What is the primary difference between a Rectangular Array and a Polar Array?
A) Rectangular Arrays create linear patterns, Polar Arrays create circular patterns
B) Polar Arrays create 3D objects
C) Rectangular Arrays are used for scaling
D) There is no difference
Answer: A
19. Can the Offset command be used on splines in AutoCAD?
A) Yes
B) No
C) Only for open splines
D) Only for closed splines
Answer: A
20. In AutoCAD, what happens if you input a very small offset distance for a circle?
A) A smaller concentric circle is created
B) The circle is deleted
C) The offset will fail
D) The circle will remain unchanged
Answer: A
21. What is the default direction of the Offset command in AutoCAD?
A) It offsets in the outward direction
B) It offsets in the inward direction
C) It asks for direction after specifying the distance
D) It depends on the object’s orientation
Answer: C
22. Can you array 3D objects using the Rectangular Array in AutoCAD?
A) Yes
B) No
C) Only with special add-ons
D) Only in AutoCAD 3D mode
Answer: A
23. Which command would you use to create a new copy of an object parallel to the original?
A) Offset
B) Array
C) Mirror
D) Trim
Answer: A
24. In a Polar Array, how can you ensure that all items are evenly spaced?
A) By setting the Total Angle and Number of Items
B) By manually moving each item
C) By using the Align option
D) By adjusting the Path Array settings
Answer: A
25. Can the Offset command be used between two parallel lines in AutoCAD?
A) Yes
B) No
C) Only if the lines are in the same plane
D) Only in 3D
Answer: A
26. What happens when the Offset distance is greater than the object size?
A) AutoCAD creates a copy at the specified distance
B) The command will fail
C) The object will be deleted
D) The object will be split into segments
Answer: A
27. How do you remove an object from an existing Array in AutoCAD?
A) By editing the array and selecting the object for removal
B) By using the Trim command
C) By exploding the array
D) By using the Offset command
Answer: A
28. What does the ‘Associative’ option do in an Array command?
A) Links the arrayed objects together for easier editing
B) Aligns the objects along a path
C) Offsets the objects from the center
D) Removes the array pattern
Answer: A
29. Can you change the shape of a Path Array after it has been created?
A) Yes, by modifying the path object
B) No, it is fixed after creation
C) Only by changing the number of items
D) Only in 3D
Answer: A
30. In a Rectangular Array, how can you adjust the number of rows and columns?
A) By selecting the array and modifying the Rows and Columns properties
B) By redoing the array
C) By using the Trim command
D) By using the Offset command
Answer: A
31. How is the number of items determined in a Path Array?
A) Based on the length of the path and the distance between items
B) By specifying the number manually
C) By setting the angle between items
D) By using the Offset command
Answer: A
32. Can you rotate objects in a Polar Array after creating it?
A) Yes, by editing the array
B) No, Polar Arrays cannot be rotated
C) Only by exploding the array first
D) Only in 3D mode
Answer: A
33. What is the default method of creating a Polar Array in AutoCAD?
A) Specifying the center point and number of items
B) Drawing a path for the objects to follow
C) Setting the number of rows and columns
D) Using the Offset command
Answer: A
34. In AutoCAD, how can you adjust the total distance covered by a Rectangular Array?
A) By modifying the spacing between rows and columns
B) By changing the number of items
C) By using the Offset command
D) By using the Trim command
Answer: A
35. Can you modify the path of a Path Array after it is created?
A) Yes, by editing the path object
B) No, the path cannot be changed
C) Only by recreating the array
D) Only in 3D mode
Answer: A
36. In a Polar Array, what happens when the total angle is set to 360 degrees?
A) The objects are distributed evenly in a full circle
B) The array is canceled
C) The objects overlap
D) The array fails to generate
Answer: A
37. How do you access the Offset command in AutoCAD?
A) By typing “OFFSET” in the command line
B) By clicking on the Array tool
C) By typing “ARRAY” in the command line
D) By using the Trim command
Answer: A
38. What happens if you explode an associative array?
A) The array becomes individual objects
B) The array is deleted
C) The objects disappear
D) The array is mirrored
Answer: A
39. Can you array objects along a curved path in AutoCAD?
A) Yes, by using the Path Array
B) No, arrays can only be linear or circular
C) Only with the Polar Array
D) Only with 3D objects
Answer: A
40. In a Rectangular Array, how can you adjust the number of objects in the array?
A) By changing the Rows and Columns settings
B) By modifying the distance between items
C) By using the Offset command
D) By setting the total angle
Answer: A
41. What is the effect of increasing the offset distance in AutoCAD?
A) It creates a larger copy of the original object
B) It scales the object
C) It reduces the size of the original object
D) It deletes the object
Answer: A
42. How do you create multiple offset copies in AutoCAD?
A) By using the ‘Multiple’ option in the Offset command
B) By manually selecting the objects
C) By using the Array command
D) By using the Mirror command
Answer: A
43. What is the result of setting the offset distance to 0 in AutoCAD?
A) The offset fails to generate
B) The object is copied on top of the original
C) The object is deleted
D) The object is mirrored
Answer: B
44. Can the Offset command be used in 3D objects in AutoCAD?
A) Yes
B) No
C) Only in 3D-specific modes
D) Only for 2D objects
Answer: A
45. How do you adjust the alignment of objects in a Path Array?
A) By modifying the alignment properties of the array
B) By changing the radius
C) By setting the total angle
D) By using the Offset command
Answer: A
46. What is the effect of increasing the item count in a Polar Array?
A) The objects become more densely spaced
B) The objects overlap
C) The array becomes larger
D) The array is mirrored
Answer: A
47. How can you change the radius of a Polar Array after creating it?
A) By editing the center point and adjusting the radius
B) By recreating the array
C) By exploding the array
D) By using the Offset command
Answer: A
48. What happens if you input a negative distance for the Offset command?
A) The object is offset in the opposite direction
B) The command fails
C) The object is scaled down
D) The object is rotated
Answer: A
49. How do you modify the number of rows in a Rectangular Array after it is created?
A) By selecting the array and changing the Rows property
B) By recreating the array
C) By using the Trim command
D) By using the Offset command
Answer: A
50. In a Path Array, how do you adjust the number of objects along the path?
A) By changing the item count in the array properties
B) By modifying the total distance
C) By using the Offset command
D) By adjusting the center point
Answer: A
- MCQs on History of Autocad
- AutoCAD User Interface and Navigation MCQ
- AutoCAD Workspaces and Layouts MCQ
- AutoCAD Drawing Commands MCQ
- AutoCAD Coordinate Systems MCQs
- Modifying Commands MCQs
- AutoCAD Layers and Object Properties MCQs
- AutoCAD Dimensioning and Annotation MCQs
- AutoCAD Blocks and Attributes MCQs
- AutoCAD External References (Xrefs) MCQs
- AutoCAD Layouts and Viewports MCQs AutoCAD MCQs
- AutoCAD Hatching and Gradients MCQs
- Working with 3D Models MCQs
- AutoCAD Rendering and Visualization MCQs
- AutoCAD File Management MCQs
- AutoCAD Customization and Automation MCQs
- AutoCAD Collaborative Tools MCQs
- Important Repeated MCQs on AutoCad