Lime Washing Soda Method MCQs

Lime Washing Soda Method MCQs

Lime soda process is_____costly.

(A).  Moderate

(B).  High

(C).  Very high

(D).  Less

(E). None of these

Multiple Choice Question Answer:   Less

For the turbid water____can be used.

(A).  Soap titration process

(B).  Lime soda process

(C).  Ion exchange process

(D).  Zeolite process

(E). None of these

Multiple Choice Question Answer:   Lime soda process

In lime soda process hardness of water is reduced to about______

(A).  10-15ppm

(B).  35-40ppm

(C).  30-35ppm

(D).  15-30ppm

(E). None of these

Multiple Choice Question Answer:   15-30ppm

In lime soda process the total dissolved solids are_______

(A).  Remains same

(B).  Not reduced

(C).  Reduced

(D).  Slightly reduced

(E). None of these

Multiple Choice Question Answer:   Reduced

The reaction is carried out at______temperature for avoiding the reduction of the residual hardness, incomplete precipitation, and slow reaction.

(A).  30-40^oC

(B).  40-50^oC

(C).  60-70^oC

(D).  50-60^oC

(E). None of these

Multiple Choice Question Answer:   50-60oC

_______are removed from the water by lime-soda process.

(A).  Minerals

(B).  Mineral complexes

(C).  Mineral alkaline

(D).  Mineral acids

(E). None of these

Multiple Choice Question Answer:   Mineral acids

The only function of the batch process is to remove the hardness of the water on ______

(A).  Large scale

(B).  Small scale

(C).  Industrial purposes

(D).  Irrigation purposes

(E). None of these

Multiple Choice Question Answer:   Small scale

In ____ amount, the coagulate is added in the hot lime sode process if needed.

(A).  High

(B).  Very low

(C).  Very high

(D).  Low

(E). None of these

Multiple Choice Question Answer:   Very low

The remaining final hardness of water is about______ after treating by the hot lime-soda process.

(A).  10-15ppm

(B).  20-25ppm

(C).  15-20ppm

(D).  25-30ppm

(E). None of these

Multiple Choice Question Answer:   20-25ppm

____is reduced because of heating at high temperature in the hot lime-soda process.

(A).  Time for treating

(B).  Energy

(C).  Cost

(D).  Corrosion of boiler

(E). None of these

Multiple Choice Question Answer:  Corrosion of boiler

There are not steps in the lime-soda process.

(A).  False

(B).  True

(C). Partially True

Multiple Choice Question Answer:  False

Due to _____ bacteria in the water is reduced to a minimum in hot lime-soda process.

(A).  Slow reactions

(B).  Faster reactions

(C).  High temperature

(D).  Low temperature

(E). None of these

Multiple Choice Question Answer:   High temperature

When the tank gets filled then it indicates that ____, in batch process.

(A).  To stir more

(B).  To add the lime

(C).  To add the catalyst

(D).  Softening is completed

(E). None of these

Multiple Choice Question Answer:   Softening is completed

_____is the reagent used in the lime-soda process.

(A).  Not regenerated

(B).  Regenerated

(C).  Regenerated depending on the hardness

(D).  Regenerated some times

(E). None of these

Multiple Choice Question Answer:   Not regenerated

The change in hardness of water needs____, in the lime-soda process.

(A).  Change in dose of lime

(B).  Change in dose of soda

(C).  Change in dose either lime or soda

(D).  Change in dose of lime and soda

(E). None of these

Multiple Choice Question Answer:   Change in dose of lime and soda

Read More MCQs on  Applied Chemistry

1. Solar Energy MCQs
2. Corrosion MCQs
3. Electro-Chemical Cells MCQs
4. Fuel Technologies Problems MCQs
5. Fullerenes and their Properties MCQs
6. Geothermal Energy MCQs
7. Water Hardness MCQs
8. Petroleum MCQs Question and Answers
9. Water Pollution MCQs
10. Nano Wires, Nano Cones and Neutralization Acidic Number MCQs
11. Natural Rubber MCQs Questions Answers
12. Green Synthesis MCQs
13. Ocean Thermal Energy Conversion MCQs
14. Hydro Power Chemistry MCQs
15. Ion Exchange Chemistry MCQs
16. Lime Washing Soda Method MCQs
17. Lubricants Chemistry MCQs
18. Polymerization MCQs
19. MCQs on Reducing Water Pollution