Research Area/ Research Interest: Fluidic shaping
Research Paper Topics for Masters and Ph.D. Thesis and publication
- DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
- Fluidic virtual aerosurfaces for flow control applications
- Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
- Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
- 3D particle tracking in a micro-channel by means of helical wavefront shaping
- Experimental feasibility study of an analog electrical-to-fluidic transducer
- The photonic integration of non-solid media using optofluidics
- Separation control with fluidic oscillators in water
- Adjustable compliance soft sensor via an elastically inflatable fluidic dome
- Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
- DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
- Fluidic virtual aerosurfaces for flow control applications
- Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
- Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
- 3D particle tracking in a micro-channel by means of helical wavefront shaping
- Experimental feasibility study of an analog electrical-to-fluidic transducer
- The photonic integration of non-solid media using optofluidics
- Separation control with fluidic oscillators in water
- Adjustable compliance soft sensor via an elastically inflatable fluidic dome
- Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
- DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication
- Fluidic virtual aerosurfaces for flow control applications
- Digital morphing wing: active wing shaping concept using composite lattice-based cellular structures
- Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
- 3D particle tracking in a micro-channel by means of helical wavefront shaping
- Experimental feasibility study of an analog electrical-to-fluidic transducer
- The photonic integration of non-solid media using optofluidics
- Separation control with fluidic oscillators in water
- Adjustable compliance soft sensor via an elastically inflatable fluidic dome
- Novel microfluidic device integrated with a fluidic-capacitor to mimic heart beating for generation of functional liver organoids
- A review of acoustic compressors and pumps from fluidics perspective
- Disordered protein-graphene oxide co-assembly and supramolecular biofabrication of functional fluidic devices
- Stabilization of the fluidic pinball with gradient-enriched machine learning control
- Comparison of different fluidic muscles
- A Modular Design Approach For Programmable Cyber-Fluidic Systems
- Nano-inspired smart interfaces: fluidic interactivity and its impact on heat transfer
- Adaptive optical beam steering and tuning system based on electrowetting driven fluidic rotor
- Electrolyte-assisted electrospinning for a self-assembled, free-standing nanofiber membrane on a curved surface
- FLUIDICS: WHAT IT IS, WHERE IT IS HEADING-AND HOW IT WILL CHANGE THE WORLD WE LINE IN
- Mapping out Min protein patterns in fully confined fluidic chambers
- Growing and shaping metal–organic framework single crystals at the millimeter scale
- Multi-functional, optofluidic, in-plane, bi-concave lens: tuning light beam from focused to divergent
- Segmented flow is controlling growth of catalytic biofilms in continuous multiphase microreactors
- Shape-reprogrammable polymers: Encoding, erasing, and re-encoding
- Thermo-Fluidic Characterizations of Multi-Port Compact Thermal Model of Ball-Grid-Array Electronic Package
- Flexible liquid metal alloy (EGaIn) microstrip patch antenna
- Study of odor blender using solenoid valves controlled by delta–sigma modulation method for odor recorder
- Effect of flow and peristaltic mixing on bacterial growth in a gut-like channel
- Miniaturized flow cytometer with 3D hydrodynamic particle focusing and integrated optical elements applying silicon photodiodes
- A parametric level-set approach for topology optimization of flow domains
- Flueric operational amplifier survey
- Adaptive energy shaping control of a class of nonlinear soft continuum manipulators
- A zeolite absorbent/nano-fluidics protection-based blast-and ballistic-impact-mitigation system
- Contactless electrostatic shaping of a capillary jet for drop-on-demand purposes
- Comparison of different neural networks models for identification of manipulator arm driven by fluidic muscles
- A 3D-printed flow distributor with uniform flow rate control for multi-stacked microfluidic systems
- Numerical computing paradigms for the dynamics of squeezing rheology of third grade fluid
- Modeling and Passive Control of Channel Filling for Micro Fluidic Networks with Thousands of Components
- Fluidic pressure ratio sensing for jet engine controls
- Fluorescence lifetime excitation cytometry by kinetic dithering
- Solid-State Physics, Fluidics, and Analytical Techniques in Micro-and Nanotechnology
- Actuating fluid–fluid interfaces for the reconfiguration of light
- Operational Control of Mixing Enhancement and Far-Field Jet Noise Suppression Using Downstream Fluidic Injection
- Three-Axis Fluidic Stability Augmentation System Flight Test Report
- Dielectrophoretic cell trapping for improved surface plasmon resonance imaging sensing
- Mitigation of blast and impact loading via the use of a zeolite-absorbent/nano-fluidics protection system
- Power fluidics and the environment
- Characterization and Modeling of silicon migration by hydrogen annealing
- Subsonic Jet Noise Reduction via Downstream Fluidic Injection
- Apex structures enhance water drainage on leaves
- STATIC CHARACTERISTICS OF FLUDIC MUSCLES
- Scheduling of microfluidic operations for reconfigurable two-dimensional electrowetting arrays
- Workshop on assembling of superstructures in soft matter
- Engaging nanotechnology: ethnography of lab-on-a-chip technology in small-scale fluidics research
- Topology optimization for thermal transport
- Teaching pattern diversification for optics course: motivate interest, open minds and apply flexibly
- Mechanically programmed Fluidic Microactuators for soft robotics applications
- Digital acoustofluidics enables contactless and programmable liquid handling
- A Parameter-Space design methodology for casual creators
- Dynamic microscale flow patterning using electrical modulation of zeta potential
- Mapping out Min protein patterns in fully con ned fluidic
- High precision control of integrated microfluidics for nanomanufacturing and fluidic sampling
- Safe pumping of hazardous liquids—A survey of no-moving-part pump principles
- Evolution of the hydrofluidic liquid SAS
- Random distributed feedback fibre lasers
- 3D structuration of LTCC and related technologies for thermal management and microfluidic structures
- Detecting Swelling States of Red Blood Cells by “Cell–Fluid Coupling Spectroscopy”
- Ultrafast laser inscription: perspectives on future integrated applications
- Transport in two-dimensional paper networks
- Raising the profile of mathematics
- Optofluidic devices and applications in photonics, sensing and imaging
- Speakers & Abstracts of Second UBM South Regional Conference
- Room-temperature fabrication of anodic tantalum pentoxide for low-voltage electrowetting on dielectric (EWOD)
- Fabrication methods and performance of low-permeability microfluidic components for a miniaturized wearable drug delivery system
- Exploring the relationship between reflexivity and reflective practice through lesson study within initial teacher education
- Visualization of surface acoustic waves in thin liquid films
- Application of a Parametric Level-Set Approach to Topology Optimization of Fluids with the Navier–Stokes and Lattice Boltzmann Equations
- Nonlinear generation and manipulation of Airy beams
- Visualization study of hybrid synthetic jets
- Numerical Investigation of Active Flow Control for Front-Loaded Low-Pressure Turbine Cascade
- High Frequency/Low Frequency Flow Control Applied To Turbulent External Aerodynamics
- Dynamic Beam Shaping Using Electrowetting Effects
- Biodiversity and species competition regulate the resilience of microbial biofilm community
- MEMS and microsystems: design, manufacture, and nanoscale engineering
- Application of Design of the Experiment in Preliminary Investigations on the end Milling of Low Temperature Co-fired Ceramics
- On the design of microfluidic implant coil for flexible telemetry system
- 3D Printing in analytical sample preparation
- A general framework for quantitatively assessing ecological stochasticity
- Digital in-line holographic microscopy with various wavelengths and point sources applied to static and fluidic specimens
- Continuum modeling of non-conservative fluid membrane for simulating long-term cell dynamics
- Recent results from NASA’s morphing project
- Positive position feedback control for large space structures
- Multi-layer, pseudo 3d thermal topology optimization of heat sinks
- Dynamic in-situ sensing of fluid-dispersed 2D materials integrated on microfluidic Si chip
- Tipping solutions: emerging 3D nano-fabrication/-imaging technologies
- Delay of airfoil stall by periodic excitation
- Polygonal non-wetting droplets on microtextured surfaces
- A brief history of liquid computers
- Liquid metal logic for soft robotics
- Optimal design for non-Newtonian flows using a topology optimization approach
- Fluid deformable surfaces
- Numerical simulations of bioextruded polymer scaffolds for tissue engineering applications
- Image-based sorting and negative dielectrophoresis for high purity cell and particle separation
- Laser-induced thermocapillary convection for mesoscale manipulation
- An electrochemically actuated micro dosing system with improved dosing control
- Engineering phase and polarization singularity sheets
- A microfluidic interfacing connection system ($$\upmu $$ μ FICS) combining simplicity, minimalism, robustness, high-pressure, reusability and low cost
- Re-engineering engineering education: A comparison of student motivation, ability development, and career paths in traditional and cross-disciplinary engineering …
- A new look at guided-wave optical sensing
- MECHANICAL ENGINEERING BRANCH
- Fluid deformable surfaces
- Numerical simulations of bioextruded polymer scaffolds for tissue engineering applications
- Image-based sorting and negative dielectrophoresis for high purity cell and particle separation
- Laser-induced thermocapillary convection for mesoscale manipulation
- An electrochemically actuated micro dosing system with improved dosing control
- Engineering phase and polarization singularity sheets
- A microfluidic interfacing connection system ($$\upmu $$ μ FICS) combining simplicity, minimalism, robustness, high-pressure, reusability and low cost
- Re-engineering engineering education: A comparison of student motivation, ability development, and career paths in traditional and cross-disciplinary engineering …
- A new look at guided-wave optical sensing
- MECHANICAL ENGINEERING BRANCH
- Paper-based microfluidics for electrochemical applications
- Spatial filters on demand based on aperiodic photonic crystals
- Microfluidic strategies for design and assembly of microfibers and nanofibers with tissue engineering and regenerative medicine applications
- Superior thermoelectric performance of thin film Heusler alloys
- Reservoir end wall effects on bivariate ion and fluid transport in micro/nano nozzles for effective electroosmotic mixing
- Aerodynamic flow control over an unconventional airfoil using synthetic jet actuators
- Program for an improved hypersonic temperature-sensing probe
- Digital microfluidics: Techniques, their applications and advantages
- Use of piezoelectric actuators for airfoil separation control
- OSU Life Sciences Interdisciplinary Graduate Programs Symposium 2019
- Topological constraints in a microfluidic platform
- Direct measurements of controlled aerodynamic forces on a wire-suspended axisymmetric body
- Acoustic microfluidics
- Tight focusing properties of spirally polarized LG (1, 1)* beam with High NA Parabolic mirror
- Computers, networks and education
- Mesoscopic self-assembly: a shift to complexity
- Cryptographic hashing using chaotic hydrodynamics
- Rejuvenation of soft material–actuator
- Report of a workshop on science, technology, engineering, and mathematics (STEM) workforce needs for the US Department of Defense and the US defense …
- A 3D-printed 3D actuator for miniaturized laser scanning probes
- SESSION I
- Controller synthesis free of analytical models: Three term controllers
- Flow control of small objects on chip: Manipulating live cells, quantum dots, and nanowires
- A self-oscillating system to measure the conductivity and the permittivity of liquids within a single triangular signal
- Local community assembly mechanisms shape soil bacterial β diversity patterns along a latitudinal gradient
- A study of water-based lubricant with a mixture of polyphosphate and nano-TiO2 as additives for hot rolling process
- Recent advancement of flow-induced piezoelectric vibration energy harvesting techniques: principles, structures, and nonlinear designs
- The effect of flow control on the wake dynamics of a rectangular bluff body in ground proximity
- Additive manufacturing of functional microarchitected reactors for energy, environmental, and biological applications
- On factors influencing arc filament plasma actuator performance in control of high speed jets
- Review of soft linear actuator and the design of a dielectric elastomer linear actuator
- Design and FEA-based Methodology for a Novel 3 Parallel Soft Muscle Actuator
- Shape Shifting Systems for Reconfigurable Front-end Applications
- Contrast diversity patterns and processes of microbial community assembly in a river-lake continuum across a catchment scale in northwestern China
- Iterative Prototyping Methodology for the Development of Innovative and Dependable Complex Embedded Systems Through SPC&KPI Techniques
- VFCVD diamond-coated cutting tools for micro-machining titanium alloy Ti6Al4V
- New technology for ultrasensitive detection and isolation of rare cells for clinical diagnostics and therapeutics
- Biologically inspired optical systems
- IDENTIFICATION, CONTROL DESIGN AND IMPLEMENTARION FOR AN AIR HEATING PLANT
- Counting of Escherichia coli by a microflow cytometer based on a photonic–microfluidic integrated device
- Electrowetting-Controlled and Electrically-Tunable Bio-Inspired Micro/Nanostructures and Optofluidic Devices
- Characterizing effects of humidity and channel size on imbibition in paper-based microfluidic channels
- Research Article A Self-Oscillating System to Measure the Conductivity and the Permittivity of Liquids within a Single Triangular Signal
- Topological microfluidics: present and prospects
- Field generated nematic microflows via backflow mechanism
- Micro-electro-mechanical Systems (mems) And Agile Lensing-based Modules For Communications, Sensing And Signal Processing.
- Static model of pneumatic flexible rotary joint
- Technical Program
- ENGenious: a publication for alumni and friends of the Division of Engineering and Applied Science of the California Institute of Technology. Issue 6 …
- Automated laser guidance of neuronal growth cones using a spatial light modulator
- Modular pumps as programmable hydraulic batteries for microfluidic devices
- Fluid mixing for low-power ‘digital microfluidics’ using electroactive molecular monolayers
- IDENTIFICATION AND ROBUST CONTROL IMPLEMENTATION FOR AN AIR HEATING PLANT
- A goal-oriented design evaluation framework for decision making under uncertainty
- Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part I–Modeling
- Fishing with Chips
- Chromosome purification by high-speed sorting
- Optofluidics
- Numerical investigation of wing morphing capabilities applied to a Horten type swept wing geometry
- Integrating Micro And Nanoscale Manufacturing In Engineering Education
- INTEGRATING MICRO-NANO LEVEL INTERDISCIPLINARY MANUFACTURING ENGINEERING EDUCATION FOR MEMS DEVELOPMENT
- Ionic-surfactant-mediated electro-dewetting for digital microfluidics
- Tandem/Cascade Polymerization
- How to Map Phase Diagrams of Polymer Solutions-Microfluidics Marries Laser Light Scattering
- 50 Years of Macromolecules: What Have We Learned?
- Brush Polymers Precisely Constructed by Combination of Living Anionic Polymerization and Ring-Opening Metathesis Polymerization: Access to Photonic Crystals
- Highly Asymmetric Gyroid Structures by Blending of ABC Triblock Terpolymer and AB Diblock Copolymer
- Single-pulse femtosecond laser Bessel beams drilling of high-aspect-ratio microholes based on electron dynamics control
- Port-Hamiltonian analysis of a novel robotic finger concept for minimal actuation variable impedance grasping
- Improving chip-to-chip precision in disposable microchip capillary electrophoresis devices with internal standards
- The Fluid Joint: The Soft Spot of Micro-and Nanosystems
- A modular microfluidic system based on a multilayered configuration to generate large-scale perfusable microvascular networks
- KNMF-User Committee
- Computational models of room temperature ionic liquids
- Reducing the pressure drag of a D-shaped bluff body using linear feedback control
- Design for a natural laminar flow glove for a transport aircraft
- From vision to the implementation of the US National Nanotechnology Initiative
- A New Approach of Soft Joint Based on a Cable-Driven Parallel Mechanism for Robotic Applications
- High-throughput arrayed comets for Dna Damage and repair
- Reduced basis approximation and a-posteriori error estimation for the coupled Stokes-Darcy system
- Isolation of L angerhans islets by dielectrophoresis
- Iterative Prototyping Methodology for the Development of Innovative and Dependable Complex Embedded Systems Through SPC&KPI Techniques
- Flow control via synthetic jet actuation
- Bio-imitation of Mexican migration routes to the USA with slime mould on 3D terrains
- Actuation systems in plants as prototypes for bioinspired devices
- Transfer function models for cylindrical MC channels with diffusion and laminar flow
- Automotive Mechatronics: Operational and Practical Issues: Volume I
- Shape-selective assembly of anisotropic, deformable microcomponents using bottom-up micromanufacturing
- 2D acoustofluidic patterns in an ultrasonic chamber modulated by phononic crystal structures
- Eckhaus instability in the Fourier-domain mode locked fiber laser cavity
- Related searches
- Pointwise Fabrication and Fluidic Shaping of Carbon Nanotube Field Emitters
- Fluidic shaping of optical components
- Thermal modulation of fluidic lenses in microgravity
- Fabrication of diffractive optical elements by programmable thermocapillary shaping of thin liquid films
- Programmable thermocapillary shaping of thin liquid films
- Biomedical microdevices: the next phase of highlighting scientific discoveries in the field of micro-nanotechnologies for medicine
- Adjustable compliance soft sensor via an elastically inflatable fluidic dome
- A Modular Design Approach For Programmable Cyber-Fluidic Systems
- Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly
- Stabilization of the fluidic pinball with gradient-enriched machine learning control
- Characterizing Macrophage Heterogeneity in Tissues Through High-Throughput Transcriptomics Technologies and Algorithms
- Digital Innovation Enabled Nanomaterial Manufacturing; Machine Learning Strategies and Green Perspectives
- Characterization of Transcriptional Heterogeneity in Gastrointestinal Stromal Tumor
- In search for an alternative to the computer metaphor of the mind and brain
- Organisation and dynamics of mitochondria and their RNA.
- Cellulose Filaments for Responsive and Functional Materials
- A roadmap for transforming research to invent the batteries of the future designed within the European large scale research initiative BATTERY 2030+
- Killer cities
- The Transcriptional Biographies of Embryonic Cells
- Enhancing Electromagnetic Performance of Metal Devices: From Nanoscale Materials Studies to Device Optimization and Macroscale Reconfiguration